Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance C O OPPOSITE BDO OFFICE MANDA AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance 214 2ND FLOOR SAMRUDDHI COMMERCIAL PREMISES CHINCHOLI BUNDER ROAD MINDSPACE MALAD WEST | Admitted-Finance |
| 4 | Admitted-Finance A 123 1ST FLOOR SHANKAR GARDEN VIKASH PURI NEW DELHI 110018 | NEW DELHI | NEW DELHI | DELHI | 110018 | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹13.4 L
EMD Value
₹26,740
Closing Date
22 Feb 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DIRECTOR,TIFR
TIFR,MUMBAI
Structural Strengthening and modification of Lift Head Room of Brahmagupta building at TIFR Mumbai as per attached tender document
2023_DAE_738358_1
TIFR/PD/CF22-99/222374
Open Tender
Civil Works
Works
365 days
TIFR
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹26,740
Technical Services Conferance Room
28 Mar 2023
2 Feb 2023
23 Feb 2023
3 Feb 2023
22 Feb 2023
13 Feb 2023
13 Feb 2023
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
R.S. Joists
Channels, angles, tees and flats etc
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 30 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works
Providing and fixing scaffolding system (Wooden type) on the exterior side of building/structure, upto 30 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with Wooden Logs, shall Comprise of working platform, the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge.Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 500 metres lead as per direction of Engineer-in-charge. In cement mortar
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 500 m initial .lead, for all leads including all lifts involved
Providing and plastering 12 mm thick cement plaster of mix :1:4 (ement: 4 fine sand) in internal walls, ceiling, column, beams etc.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work
Providing and fixing Stainless steel wire mesh (Grade-304) aperture 1.4 mm and 0.50 mm dia wire for Plastering work
Structural Repairs :- Providing structural repairs in Old Damaged concrete structures/surfaces with approved Polymer with following operations 1)Removal of loose/Spalled or damaged concrete by chipping and cleaning the concrete surface and reinforcement steel with wire brush and with water jet. 2) Cleaning the re-bars with rust remover for complete rust removal and washing with water jet to make the surface free from Acid content. 3) Applying Protective coat /bond coat using Polymer and Cement in the proportion of1:1.5(1 part polymer and 1.5 parts of cement in synthetic enamel paint like consistency with brush. 4) Reinstate the area with polymer modified mortar in layers of maximum 20mm with the proportion of Cement 50kg : Washed and dried river sand 87.50; Silica sand 37.50 kg. mixed with 10 liters of polymer (or 1kg cement :1.75kg washed and dried river sand ; 0.75kg Silica sand : 200ml polymer) 5) If thickness of repair exceed 20mm,after every 20mm thick bond coat as per 2 above to be applied continuing further structural repair works. This work is inclusive of all material, labour etc complete as directed with approved chemical manufacturer and specified by the manufacturer for Structural repair shall be used.
A. Nozzle fixing:- Providing & applying for fixing Nozzles of 12mm dia by drilling holes & fixing using rendrog Plug M/s Fosroc chemical PVT. Ltd. Or equivalent B. Epoxy Grouting:- Providing & applying epoxy resin grout Concresive 1315 BASF/Cebex 100(Fosroc) or equivlent through the nozzle fixed already under pressure of 3-3.5 kg/Sq.cm 2.Above including all labour, material etc complete.
A. Crack opening & filling :- Providing & applying for identify, cleaning all the joints of center opening, wet joints, marking the same. Making "V" groove at the interface of joints. Filling the "V" joints with polymer modified mortar/Cebex 100 or Nitomortar 30 M/s Fosroc chemical Pvt. Ltd or equivalent.
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., above floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement all complete as per direction of Engineer-In-Charge. Upto and including 12mm dia. Note : Dia of hole is 12mm, use of profometer while drilling not to damage existing rebar. Hole shall be thoroughly cleaned prior inserting the anchor. pressure Grout shall be carried out to fill the gap if any
Anchor Fastener : 10mm Dia GI Hilti HSL 3 with min. embedment depth of 110mm or Approved Equivalent as directed by Engineer In charge
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks (Grade -1, Min. 4MPa Strength) in super structure above floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar as per IS 15477:2019 all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for separately).
Providing and fabricating and fixing at site hot dip galavanised structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted bolted welded connections without connecting plates, braces etc. complete including all transporation , labour and all lift excluding GST (Note : Grade of Steel shall be E250 Confirming to IS 2062, Make : SAIL/JSPL/RINL/TATA or Approved Equivalent. Min. Zinc coating thickness shall be 610 GSM
Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.).
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as directed by Engineer Incharge
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 25mm depth and 25 mm width to prevent entry of rainwater
Providing and laying in position bitumen hot sealing compound for .expansion joints etc. Using grade ‘A’ sealing compound
PART 'B" Any unforeseen item not covered above, executed from CPWD Delhi Schedule of Rates 2018 upto a base value of Rs. 1,50,000/- Hint: Bidder is supposed to quote rate for this item in column (green) at value which is at a certain percentage above or below the rate of DSR 2018. For e.g. if the estimated rate is Rs. 1,50,000/- then bidder should quote rate of Rs. 1,65,000/- in case he intends item in this part to be paid at the rate of 10% above DSR 2018 or Rs. 1,35,000/- in case he intends item in this part to be paid 10% below the DSR 2018 The value given in the rate for this item shall be used to derive the rate to be paid for the item from DSR 2018
S N CONSTRUCTION
KUMAWAT INFRASTRUCTURE
ORIENTAL INTEGRATED FACILITY MANAGEMENT PVT. LTD.
DEEPAK ENTERPRISES
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .