CERTAIN REPAIR AND PERIODICAL SERVICES TO MD ACCN OF ASSAL UTTAR ENCLAVE UNDER AGE BR I OF GE WEST FEROZEPUR CANTT

Amount

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the same opening complete all as specified.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in the other opening complete all as specified.

S&F factory made for pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item no 5 above here-in-before but size 165x60mm with double rebate.

S&F 40mm thick Flush door shutters,solid core construction,with particle board core and plywood face panels,commercial type,both faces are covered with decorative face veneer with lipping/frame to match complete all as directed and specified by Engr-in-Charge.

S&F factory made Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

M&L PCC (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

S&F anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

Hacking out old broken glass(any thickness,size quality or description) from wooden or metal frame including punching or drilling out old glazing in/spring clips and providing and fixing new one all as specified and directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4mm thick sheet glass ordinary quality,glass is ground or obscured or frosted,on one side and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F 125mm in repair Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F 150mm in repair Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 250mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F in repair Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F 100mm size Butt hinges,medium weight,cold rolled mild steel as fixed in repairs all as specified and directed.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repair complete all as specified and as directed.

S&F 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repair 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

M&L for Cutting holes in brick wall exc half bricks but not exc one brick in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed

S&F mild steel framed work such as grills/guard bars, cooler stand, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290(Gde-E-165) complete all as specified and directed by Engr-in-Charge.

M&L for Forming jambs etc built in cement mortar 1:6 to openings incl cutting toothing and properly bonding into to old work also facing ,jointoing and pointing to match to existing work complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

M&L 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth without using extra cement. Note:- WPC shall be measured and paid separately.

Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric(wt. not less than 150 gms/sqm)land on primed surface by forced apllication complete all as specified.

M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

M&L 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified

Supply only water proofing compound.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 46 above here-in-before but using old bricks retrieved from demolition under item 45 here in before including cleaning and removal of mortar from old bricks.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

M&L for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for glazed coloured ceramic tiles of size 300x200x6.5mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

M&L for 16-18mm thick coloured marble slab of size not less than 1 Sqm each, machine cut as in cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade of marble including cutting, polishing (mirror type) complete all as specified.

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 80.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.62 here in before but 20mm dia.

Demolition of boarding of any description and in any position complete all as specified.

S&F prelaminated particle board of 18/19 mm thick oneside decorative face of exterior grade as in wardrobe and cupboard shutters and shelves etc. complete all as specified and directed.

S&F 30mm width of flaps of continuous Piano hinges mild steel bright finish or electrogalvanised.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S&F Aluminium tower bolt of extruded section, 100mm length of bolt and fixed with screws, complete all as specified.

S&F 100mm size, Extruded aluminium alloy handles, fabricated type, anodised and fixed with screws complete all as specified.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge

M&L for 40mm thick cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in floor finishes with surfaces finished even and smooth without extra cement complete all as directed by Engr-in-Charge and as specified.

Supply only 38mmx1.5mm thick Plastic dividing strips as in floors complete all as specified.

S&F brass CP stop cock with long shank and cup (concealed type) 15mm dia bore screwed down with crutch handle both end screwed for iron pipe or union as fixed in repairs.

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F 500 Litre Rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F PVC Connection pipe, 600mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F CP grating 125mm size of dia with or without wate hole fixed in repairs.

S&F brass CP 20mm dia towel rail of 60cm long fixed with brackets at its ends as fixed in repairs and all as specified and directed.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F Vitreous china white wash down water closet semi-pedestal pattern(Anglo-Indian Type) including PVC seat cover and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F Corner glass shelves 300 mm radius, 8mm thick as per sample radius for bath room, fixed on suitable support of brass chromium plated clips complete all as directed

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F Brass chromium plated bottle trap 32mm dia for wash basins with inlet or outlet screwed for pipe or connections including necessary packing,union,cap and fixing in repai complete all as specified and directed.

S&F in repair 32mm dia waste coupling fittings brass chromium plated for steel sinks/wash hand basin etc, full or half threaded complete all as specified and directed.

S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

S&F stainless steel sink with drainage board made of of 1.00mm thick sheet for kitchen with plugs washers38/40mm dia PVC waste pipe and including 38/40mm dia CP waste coupling fixing with cast iron cantilever brackets and connecting union to pipe over all size 915mmX460mm bowl size 410mmX330mmX160mm fixed in repairs complete all as specified and directed.

S&F 1.00mm thick stainless steel plate racks of size 750X600X250mm all as specified and directed.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint for fixing in 15mm dia pipe.

Dismantling CI pipe alongwith fittings of 50/75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes (pressure rating not less than 4 Kg/cm2) single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

S&F in repair CP central hole basin mixer for wash hand basin including all fittings i.e including connection pipe as per manufaturers specification complete all as specified and directed (Make : Parko or equivalent) complete all as directed.

S&F in repair CP fency type Wall mixer 2 in-1,connecting legs and wall flange complete all as per manufacturer's instruction and as directed (Make : Parko/Prayag or equivalent) complete all as directed by Engineer-in-Charge

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M&L for Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M & L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and apply one coat of oil bound distemper all as specified.

Harmesh Kumar Sharma and Sons

Kissan contractor and engg works

M/s Manoj Construction Co.

V V AND COMPANY

KAILASH CONSTRUCTION COMPANY

JAWAHAR CONSTRUCTION COMPANY

Brar Enterprises

CHETAK CONSTRUCTION COMPANY

Kansal Enterprises