PROVN OF HARDSTANDING AND BOUNDARY WALL AT BASANTAR WAR MEMORIAL AND OTHER SANCTIONED WORKS UNDER GE WEST MATHURA

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.50 mtr depth for foundation etc or for shafts, wells, cesspits, main holes, pier holes etc complete in soft/loose soil complete all as specified and directed.

Surface excavation n exc 30cm deep and average 15cm deep and getting out in soft/loose soil all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed.

Removing excavated soil not exc 50 mtr and deposited where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed.

M&L for Brick work with sub class ‘B’ old size burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 including water proofing compound on other than fair face of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L preparation of new plastered surfaces and applying two coats of exterior weather coat over a coat of primer on walls all as specified.

M&L hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed.

M&L for 100mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for sand filling under floors or in foundation complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for Machine pressed coloured precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for vitrified paving tiles (any colour) of size 30cm x 30cm x 10mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement mortar (1:4) complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in lintels upto 1.5 metre clear span, cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, coping, parapets and railing upto 60cm height, copings bed block,roof kerbs or mud stops, kerb stone, kneelers, apex stones, bed plates, surface channels and drains, benching, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L exterior coloured Glazed ceramic tiles in vertical surface 450x300x7 mm with highlighter thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) for shelves (veneering to wall) including 15mm thick plaster in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed.

M&L for application of two coats of synthetic enamel paint over a coat of primer on with preparing new plastered / concrete surfaces as in kerb stone of foot path with different tints in alternate strips matching to existing complete all as specified and directed by Engineer-in-Charge.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable with stranded aluminium conductor 1100 volts grade of cross sectional area 16 sq mm 4 core confirming to IS-7098 (Part-I-1988) laid in trenches, along poles through pipes etc complete all as specified and directed by Engineer-in-charge. Notes :- (i) Excavation, earth work, sand cushioning, cable protection and GI pipe shall be measured & paid for separately under respective items of BOQ (ii) Road cutting / floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall deemed to be inclusive of the above provisions.

S&F Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches / under road / drains, fixed to poles / walls with required numbers of clamps made out of 25x3mm flat iron, bolts, nuts and washers for protection of LT electric cable complete all as specified and as directed by Engineer-in-charge. Notes :- (i) Excavation & earthwork shall be measured & paid for separately under respective items of BOQ (ii) Cost of flat iron clamp if required is included in the unit rate of this item. Nothing extra shall be paid on this account.

S&F sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 Volt complete with one single pole MCB of cap 10/20 A, C series complete all as specified and directed.

Supply & fixing PVC flat twin core of size 10 Sqmm complete all as specified and directed.

Supply & fixing PVC flat twin core of size 2.5 Sqmm complete all as specified and directed.

Supply & fixing of LED Spike light 12 watt, IP 65 having step profile placed on top ideal for architectural outdoor lighting, typically giving off light from the sides suitable to illuminate walkways, steps or pathways with complete accessories complete all as specified and directed.

Supply & fixing of LED Flood light, 70Watt, IP - 66, Impact resistance - IK 07, colour temp- 5700 K, Class I in epoxy powder coated die-cast aluminium housing (ADC 12) in grey finish with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout.High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED >140 lm/W and viewing angle of120° to ensure better uniformity. PC Lens with Asymmetric/symmetric light distribution and Toughened glass fixed to housing with 06 Nos screws. Integral electronic LED driver with APFC,lower THD, Open Circuit Protection, Over Voltage Protection, Surge Voltage Protection upto 10kV with built In SPD & other safety test as per IS 15885 Part-2/Sec 13 for wall or surface mounting using adjustable MS cradle of thickness 4 mm with SS angular dial for precise angular mounting of luminaire including neccessary PCC work reqd to make foundation base to install the luminaires complete in all respect & as directed.

Supply & fixing security light with LED street light, 60Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class-I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatment High efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13 alongwith arm with single arm bracket OD 58 mm (max) with clamp, nut, bolts etc mounted on wall complete in all respect complete all as specified and directed.

Supply & fixing of LED wall/mirror focus light 15/18 watt of size upto 18 inch as per site requirement complete all as specified and directed.

Supply & fixing of LED decorative gate light 45 watt (Opal type) made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base complete all as specified and directed.

Supply, installation, testing & commissioning of inverter type split Air Conditioner (hot and cold), 5-in-1 convertible, PM 2.5 Filter with activated Carbon, with indoor , outdoor unit, full function wireless remote and auto restart feature, interconnecting copper tubing, insulation, interconnecting wiring etc in complete as per site requirement to provide rated cooling and heating as per specification laid as below:- (i) Rated Tonnage Capacity Range : 2.00 TR (ii) Rated Cooling Capacity in Watt : 6400 (Min - 2231 to Max - 7292) (iii) Rated Heating Capacity in Watt : 6400 (Min - 2238 to Max - 6772) Cont/-

Cont/- (iv) Rated Voltage : Single Phase 230 V ± 10%, 50 Hz (v) Rated Power Input (Cooling / Heating) : 2110/1900 Watt (vi) Rated ISEER : 4.0 to 4.39 (vii) Technology of air conditioner : Inverter Technology / twin rotary. Design of AC ambient temp -2ºC to 52ºC (viii) Function : Cooling, De-humidification and Heating (ix) BEE Star rating : Minimum 3 star rating or above as approved (as per specification of BEE effective from 1st July 2022) (x) Cooling/Condensing Coil : 100% Copper (xi) Indoor Noise Level : upto 48 dB (xii) Compressure type : DC/AC inverter-return cooled/Twin Rotary or equivlent

S&F wall mounted voltage stabilizer of capacity 5 KVA in digital display for automatic operation with high/low cut off with TDR, single phase naturally air cooled indoor type & designed for input variation between 100 Volts to 290 Volts with output voltage stabilzed at 230 Volts with accuracy of (+/-) 2.5% complete all as specified and directed.

S&F sheet metal enclouser with a two pin and earth plug and socket complete with one single pole MCB upto 32 Amps, 240 volts capacity and tested on completion complete all as specified and directed.

S & F MCB DB with sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

S&F MCB SP 240 volts, 06-32 Amps 10KA, 'C' Series complete all as specified and directed.

S&F MCB SPN 240 volts, 40-63 Amps, 10KA, 'C' Curve complete all as specified and directed.

S&F Sub main wiring complete with 4 single core 10 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 40mm dia concealed including single core multistranded copper conductor 10 Sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and directed by Engineer-in- charge. Note : Four runs of 10 Sqmm single core cable and one run of 10 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.

S&F Sub main wiring complete with 4 single core 4 Sqmm (Nominal area) multi stranded copper conductor PVC insulated unsheathed cable FRLSH drawn in and including heavy duty PVC conduit ISI marked not less than 20mm dia concealed including single core multistranded copper conductor 4 Sqmm size cable as earth continuity wire drawn in same conduit complete all as specified and directed by Engineer-in- charge. Note : Four runs of 4 Sqmm single core cable and one run of 4 sqmm copper wire earth continuty conductor and conduit with fittings shall be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt, connected to galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI pipe 20mm light grade for water filling including 15x20mm reducer socket funnel wire mesh, RCC cover with concrete 1:2:4 using 8 mm# bar@100 mm c/c both ways ,PCC chamber pit with PCC (1:3:6) type C-2 and excavation and earth work, disposal of suplus spoil to a dstance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as specified and directed. Note :- The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level.

Supplying, installation, testing and commissioning of interconnecting copper pipe / tube work with elastomeric nitrile rubber / closed cell expanded ploythene tubular insulation suitable for 1.5/2.0 TR split Air conditioner units (for sunction and discharge lines) including brazing, benching required at site complete with all fittings such as bends, tees, elbows etc as per specification. Notes : (i) The quoted rates shall include rates for chiseling, making holes through walls & making good of wall and clamps etc. (ii) One run of suction pipe, one run of discharge pipe of same length will be measured as one unit length.

S&F AC stand / heavy duty Air conditioner outdoor unit mounting bracket make as per the model complete all as specified and directed by Engineer-in-charge.

Supply, installation, testing & commissioning of electric storage water heater of 25 litre capacity, rated voltage -230 VAC, single phase, 50 Hz of rated power input-2000 Watt conforming to IS 2082 with standing loss ≤ 0.511 & ≥ 0.465 KWh/24Hr/45°C (4 Star BEE rating wef 01 Jan 2023) having feroglas dry powder coating in water stoarge tank of ultra thick super cold rolled steel plates of high-strength, sock - proof ABS body using IPX4 technology to protect electrical parts from water splash whirlflow technology to avoid direct contact between cold and hot water flow, glass coated incoloy heating element for good corrosion resistance with execllent resistance to both oxidation and carbonization, feather touch panel for temperature setting between 25°C to 75°C to control energy consumption, digital display with 3 preset controls for easy operation, energy saving high density thick PUF insulation for better heat Cont/-

Cont/- retension, having sacrificial magnesium anode rod with steel core to protect water tank from rust and corrosion to enhance the tank life, having safety feature like thermostate, thermal cut off, multifunction valve, shock-safe plug to prevent electric shocks by cutting off the power in case of current leakage suitable for high-rise buildings of 8 bar (0.8 Mpa) pressure including fixing & connecting accessories like mild steel anchor fastener of size 10 x 100mm with nuts and washers, drilling/making hole on wall with provision of stainless steel breaded (SS 304 Graded) connection pipe (01 Pair) in 600 mm long for hot & cold water circulation with nuts and washers and testing thereafter complete in all respect complete all as specified and and directed.

S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-charge.

KASHI NATH BANWARI LAL (BID ID -3118951)

BHARDWAJ CONSTRUCTIONS (BID ID -3114797)

M/s Aditya Enterprises (BID ID -3119094)

shyam construction (BID ID -3128279)

R N AGRAWAL (BID ID -3118405)