PROVN OF TRANSIT ACCN IN D E COY AND PROVN OF LABOUR AMENITY ROOM AT PETROLEUM PLATOON AT KIARI AREA UNDER GE 860 EWS

Amount

Surface dressing n exc 15 cm deep in soft /loose soil complete all as specified and directed by Engr in charge.

Excavating in post holes (or similar holes)each n. exc 0.5 cum, getting out, returning, filling in and ramming earth, broken rubble mixed with earth around, in layers not exc 25 cm complete all as specified and directed by Engr in charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr in charge.

M&L for Cement concrete type D2 1:4:8 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and directed by Engr in charge.

M&L Cement Concrete Type-B1 1:2:4 (using 20 mm graded crushed stone aggregate) in foundations,including rafts, footings for posts complete all as specified and directed by Engr in charge.

S&F steel work in hollow mild steel sections , roof trusses (framed ) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces cleats etc complete all as specified and directed by Engr in charge.

M&L for Pre-cast cement concrete block masonry type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed by Engr in charge.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr in charge.

M&L for Cement Concrete type D-2, 1:4:8 (using 20 mm graded crushed stone aggregate) 100mm thick as Sub base complete all as specified and directed.

M&L for 40mm thick Cement Concrete type B-1, 1:2:4 (using 20 mm gradedcrushed stone aggregate) as in floor Sub base complete all as specified and directed.

M&L Plinth protection 75 mm thick in PCC type C1 1:3:6 (using 20 mm graded aggregate crushed stone aggregate) laid in alternate bays (not exc 2 Sqm each) finishing even smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as specified and directed.

S&F Mild steel bars 10 mm dia and over Fe-410 W(Gde E 250) cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed by Engr in charge.

M&L for reinforced cement concrete(nominal mix)1:2:4(using 20mm graded crushed stone aggregate)in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves complete all as specified and directed.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for 25mm thick type B1 PCC 1:2:4 (using 20mm graded crushed stone aggregate in sub base complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6. for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each colour tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick screed bedding in CM 1:6. for laying floor finishes receiving floor tiles complete all as specified and directed by Engr-in-Charge.

M&L Glazed ceramic digital tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engr-in-Charge.

S&F coloured PVC designer modular wall cladding 5 to 6 mm thick with air gap, installed with necessary fixing GI channel or frame with end joints on edges (designed, colour patterns as per directed by Engr in charge) The frame work will be fixed to wall using aluminium screws complete all as specified and as directed by Engr in charge.

S&F coloured PVC designer for ceiling 5 to 6 mm thick with air gap, installed with necessary fixing GI channel or frame with end joints on edges (designed, colour patterns as per directed by Engr in charge) The frame work will be fixed to wall using aluminium screws complete all as specified and as directed by Engr in charge.

SDC Laminated flooring 8mm thick of any coloured manufactured by Direct pressure laminated (DPL) wherein the empty Abrasive aluminium oxide overlay alongwith metamine impregnated decorated film is directly fused with the back with flooring locking profile in designed with double click locking system on the length and single locking width alongwith desire locking strength complete all as specified and directed by Engineer-in-Charge

M&L for veneered decorative plywood 9mm thick grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in wall paneling complete all as spd & directed.

M&L for veneered decorative plywood 4mm thick (3 Nos of ply) grade 1 (with BWR resin) with decorative face veneers one face fixed with nails to timber frame work complete as in ceiling paneling complete all as spd & directed.

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 6 sqcm & not exc 13 sqcm, secured with nails or brads complete all as specified and as directed.

M&L First class soft wood sectional area not exceeding 6 sqcm Moulding as in cornices, picture rails and the like , secured with nails or brads complete all as specified and directed by Engr-in-Charge.

S&F grid false ceiling GI system powder coated prelude (main nrunner section 32x 24x0.30x3600mm cross tee 25x24x0.30x1200mm wall angle 24x24x0.40x3000mmand including providing and fixing PVC pre-laminated in front side and aluminium foil backed gypsum tile board of size 595x595x8-9mm fixed ceiling framework with necessary fastening GI wire and cleats complete all as specified and directed by Engr-in-charge.

S&F Anodised aluminium frame of standerd section for doors, windows, ventilators with double rebates including joining cleat for fixing etc. complete all as specified and as directed by Engr-in-Charge.

M&L for anodised aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100mm long (3 No.) suitable handle (2 No.) (Glass / Wiremesh should be measured seperately) along with locking arrangement complete all as specified and as directed by Engr-in-Charge.

M&L Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

S&F 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-Charge.

15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface etc. on wall finished even smooth without using extra cement, all as specified.

Rendering 15 mm thick on fair faces of brick wall or cement concrete surface in cement mortsr 1 :4 finished even smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed complete all as specified and as directed by Engr-in-Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed by Engr-in-Charge.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including waste coupling and bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F PVC 10 Ltrs valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with 32 mm dia flush pipe with suitable length etc. ISI approved complete all as specified and directed by Engr-in-Charge.

S&F One piece European WC vitreous china with S/P trap & slow motion seat cover as per Cera cat part no. S1014124 or equivalent approved in CENC of jaquar/Hindware etc complete all as specified and as directed by Engr-in-Charge.

S&F vitreous china Wash hand basin, white, flat back size 550 x 400mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32mm size bore of pipe complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-Charge.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-Charge.

S&F Toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-Charge.

S&F stop valves / angular valves 15mm bore chromium plated, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union complete all as specified and directed by Engr-in-Charge.

S&F bib taps 15mm dia cast copper alloy with crutch or butter fly handle fancy type screwed down for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15 mm bore 450mm long with screwed socket of brass on both ends and rubber washer complete all as specified and directed by Engr-in-Charge.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-Charge.

S&F brass chromium plated Tubular Towel rail 20 mm dia D type 60 cm long complete all as specified and directed by Engr-in-Charge.

S&F wall mixer (three way) bras chromium plated suitable for fiuxing with GI pipes 15mm dia as per Parryware Cat part no G3016 A1 for equivalent of Jaquar/Parco/hindware complete all as specified and directed by Engr-in-Charge.

S&F Brass chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipeor union complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 75mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm dia PVC(SWR) floor trap plain with grating including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B1 complete all as specified and directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) pipes 110mm dia, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.

S&F 20mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

S&F 16mm 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge.

S&F Rotational moulded water tank 1000 liter polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as spd and directed by engr in charge.

S&F 20 mm bore ball valves high pressure PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

S&F 0.50 mm thick Pre- painted galvalume aluminum zinc coating GI based corrugated in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as directed by Engr-in-Charge.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge covering/cladding to wall, fixed with self tapping screws as specified and directed by Engr-in-Charge.

M&L Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes etc. with riveted, bolted or welded attachment confirming to Fe 410-W (Gde E-250), complete all as directed by Engieer-in-charge.

Mild steel bolts neck exc 10 mm dia and n exc 15 mm dia, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each scre-wed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and treating with two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Preparing plastered new surfaces of wall and applying two coats of cement base paint with one coat of primer complete all as specified and as directed by Engr-in-Charge.

Preparing of new surface of wall of any description and applying two coats of distemper oil emulion, with one coat of primer complete all as specified and as directed by Engr-in-Charge.

M&L for Reinforced cement concrete (nominal mix) 1:2:4 (using 20 mm greded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by Engr-in-Charge.

M&L mild steel TMT bars 6mm to 8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire(annealed ) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

S&F steel work in tubular,rectangular, square hollow section trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 100 mm thick 1:2:4 type D2 (using 40 mm graded crushed stone aggregate) as in sub base complete all as specified and as directed by Engr-in-Charge.

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engr-in-Charge.

S&F Factory made shutter 35 mm thick 2nd class hardwood Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.

S&F 30mm thick Second class hard wood Glazed and skeleton windows,ventilators open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.sizes of members of shutters as specified in SSR Part I, Section 8 Clause 8.24(a) complete all as specified and as directed by Engr-in-Charge.

S&F 3.00 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engr-in-Charge.

M&L PCC type B-1 1:2:4 (using 20 mm graded crushed stone aggregate) for fixing hold fast complete all as specified and as directed by Engr-in-Charge.

S&F MS flat iron of size 25x3 mm as in hold fast conforimg to Fe 410-0 or Fe-310-0 complete all as specified and as directed by Engr-in-Charge.

S&F 100 mm size extruded alluminium alloy with galvanised mild steel hinge pin type C-21 complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section with 150 mm long bolt and fixed complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium handles, cast type, anodised 125 mm size complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, 250 mm long complete all as specified and as directed by Engr-in-Charge.

Prepration of new wooden or wood based Surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engr-in-Charge.

S&F Viterous China wash hand basin with pedestal coloured, flat back of 550 x 400 mm including brackets, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of 750mm long complete all as specified and as directed by Engr-in-Charge.

S&F vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete including P/S traps complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded water tank 500 liter polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.

S&F 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

M&L for PVC (SWR) 110 mm gully trap setting joining with solvent cement complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm fixed complete all as specified and directed.

S&F angle/stope valves 15mm bore (for iron pipe) fancy type PTMT any colour screwed down high pressure with butterfly handle screwed both ends complete all as specified and directed.

M&L second class hard wood timber scantling plain fillets square, rectangular or bull?nosed, splayed, chamfered or rounded on one edge or face triangular in section, clean sawn, secured with nails or brads, sectional area exc. 3 Sq cm n.exc 6 Sq cm secured with nails or brads complete all as specified and as directed by Engr-in-Charge.

Excavation over areas n.exc 1.5m deep and and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.

Excavation over areas exc 1.5m deep and n.exc 3.00 m deep and getting out in hard/dense soil complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C-2 (Nominal Mix) using 40 mm graded crushed stone aggregate as in foundation filling mass concrete and similar work complete all as specified and as directed.

M&L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

M&L for Walling of random rubble stone masonary, uncoursed, well bonded, bedded and solidly hearted, laid dry complete all as specified and as directed by Engr-in-Charge.

M&L for rough finished Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed by Engr-in-Charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof n.exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20 cm wide complete all as specified and as directed by Engr-in-Charge.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in cover slab for manhole set in CM 1:4 including necessary form work complete all as specified and directed by Engr in Charge.

M&L for rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement and using WPC as oer manufacturer's instructions complete Note: WPC shall be measured and paid separately.

M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I (2009) complete all as specified and directed by Engr-in-Charge.

M&L for loose filling with broken stone aggregates of gauge 80 to 150 mm in soakage pit, soakage wells complete all as specified and directed by Engr-in-Charge.

M&L Concrete bed 1:4:8 type D-2( using 40mm graded crushed stone aggregate) to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 110 mm complete all as specified and directed by Engr-in-Charge.

Supply only Integral Water proofing compound.

M&L Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified and directed by Engr-in-Charge.

S&F 150mm dia, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for point wiring complete for one light point / exhaust fan point / bell point controlled by one 1-way switch/ bell push, with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked and PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbow, reducers with and including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and incl Metal flush box of suitable size for fixing modular switches / sockets etc and making good surface by wall panelling etc, complete all as directed. Note : 1. The cost of Metal flush boxes and accessories etc is deemed to be included in quoted rate. 2. In case cutting & chasing of conduit is encountered with any beam / column, the PVC casing & capping or surface conduit will be used to avoid any damage to the RCC portion. 3. No cutting & chasing shall be done on ceiling surface for laying PVC conduit for ceiling fan point wiring etc, hence the PVC casing & capping or surface conduit will be used for the same.

Description all as per Srl item No.107.00 here-in-before but with One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch.

Description all as per Srl item No.107.00 here-in-before but with 2.5 sq mm FRLS copper wire with 1.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Modular switch 1 way 6A , 1 module size complete all as specified and directed.

S&F Modular switch 1 way 16A , 1 module size complete all as specified and directed.

S&F Modular Bell push 1 way 6A , 1 module size complete all as specified and directed.

S&F Modular Socket , 6 A , 5 Pin , 2 module size complete all as specified and directed.

S&F Modular Socket , 6 A / 16 A , 5 Pin , 2 module size complete all as specified and directed.

S&F Modular cover plate with frame 6 module complete all as specified and directed.

S&F Modular cover plate with frame 4 module complete all as specified and directed.

S&F Modular cover plate with frame 3 module complete all as specified and directed.

S&F Modular cover plate with frame 2 module.

S&F electric call bell ding dong AC 230 volts Single Pole complete all as specified and directed.

Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all specified and as directed by the Engineer-in-Charge

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 1x10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all specified and as directed by the Engineer-in-Charge

S&F angular lamp holder, PVC/Polycaronate type with back plate suitable for 9 watt LED bulb for batten fittings complete all as specified and directed by the Engineer-in-Charge.

S&F LED bulb 9 Watt complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling 6500K including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m, complete all as specified and directed by Engineer-in-charge.

S&F DB, double Door, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof, suitable for incorporation of MCB’s and isolators etc and making all necessary connections, duly flush of wall surface, complete all as specified and directed.

Supply and fixing SP 5 to 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Supply and fixing SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-charge.

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to CBDB’s as specified or indicated including testing on completion complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and directed.

Supply and fixing switch, socket combination 2 in 1, 5 Amp, flush type completeall as specified and as directed by Engr-in-charge.

Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5A/16A, 5 in 1 flush type complete all as specified and as directed by Engr-in-charge.

Supply and fixing sheet Metal enclosure Double door type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint all as specified and as directed by the Engr-in-charge.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 50 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge.

Excavation in trenches not exceeding 1.5m and not exceeding 1.5m in depth for laying of electric cable and getting out in hard and dense soil, complete all as specified and as directed by the Engr-in-Charge.

Returning, filling in excavated soil, including leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed by the Engr-in-Charge.

Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed by Engr-in-Charge.

M&L for sand cushioning with layer of sand 8cm thick before laying of cable and 15cm after laying, streching & testing of cable in trenches complete all as specified and directed by Engr-in-Charge. Note :- Only punned thickness i.e 18cm shall be measured and paid.

Supply, installation, testing and commissioning, in replacement, Junction box , cubical type, factory made, outdoor type of Size 45cm(l)x30cm(w)x60cm(h) , dust and vermin proof, fabricated out of mild steel sheet not less than 3.15 mm thick, complete with openable shutters in front and rear having proper locking arrangement including including 04 Nos legs made out of angle iron of suitable size and height of each leg shall be grouted in PCC and aluminium bus bar of size 400 Amps capacity , Three phase and neutral bus bar , making hot and cold drilling holes to aluminium bus bar . Junction box shall be spray painted internally and externally with two coats of synthetic enamel paint over a priming coat of red oxide primer and connecting all incomming and outgoing cables with suitable size of Aluminium lugs complete all as specified and as directed by Engineer-in-Charge and comprising of following accessories/fittings :-

(a) MCCB 4 pole, 160 Amps,240/415 Volt, 50Hz, 10 KA= 01 Nos (I/C)

b) MCB SPN 63 Amps, 240 Volts - 04 Nos (O/G)

Note : Unit rate quoted by the contractor here-in-before also includes for fixing and connecting of MCBs and installation of panel on suitable PCC foundation and PCC plat form incl necessary earth and PCC work all as per manufacturer instructions and as directed by the Engr-in-Charge.

Supply and laying XLPE insulated, armoured, heavy duty electric cable, with stranded aluminum conductor 1100 V grade nominal cross sectional area 10 Sqmm, 2 core laid in trenches, ducts, drawn through pipes across the road/path/along poles/wall/floors/equipment etc including jointing and testing complete all as specified and directed by the Engr-in-Charge.

RISING SUN ENGG WORKS (BID ID -3320317)

N K BUILDERS (BID ID -3322248)

M/S GLOBAL ENGINEERS (BID ID -3322464)

M/S BHAT ENGINEERS (BID ID -3323891)

M/S LIBE & CO (BID ID -3320440)

M/S OSHO TRADERS (BID ID -3322565)

M/s Koul & Sons (BID ID -3323787)

M/S BILAL AHMAD BHAT (BID ID -3324315)