MTC OF EI IN NRB AT CHANDIGARH (PROVIDING ANGLE IRON STAND AND CABLE TRAY FOR LIFTING UP THE LT CABLES FROM ROOFTOP SURFACE OF THE VARIOUS BUILDINGS AT PUNJAB AND HARYANA HIGH COURT SECTOR 1, CHANDIGARH).

Supply, fabrication, welding, painting, carriage & erection of MS angle iron stand for installation of cable tray on the roof of building for lift up the various size of LT cables. The angle iron of size should be 50 mm x50 mm x5 mm (min.) with weight min. 1.158 kg per feet. and the size of stand should be 2 ft. height and 1.5 ft. wide alongwith 2 Nos. 4” angle iron base welded at the bottom on the both legs. The weight of each stand should be minimum 7.18 KG and the cost of welding, jointing, painting and nut/ bolts etc. as required to complete the job to the entire satisfaction of EIC. This also includes the painting with the 2 coats of black paint after 1 coat of primer of superior quality.

Supply, fabrication, welding, painting, carriage & erection of MS angle iron stand for installation of cable tray on the roof of building for lift up the various size of LT cables. The angle iron of size should be 50 mm x50 mm x5 mm (min.) with weight min. 1.158 kg per feet. and the size of stand should be 1.5 ft. height and 1 ft. wide alongwith 2 Nos. 3” angle iron base welded at the bottom on the both legs. The weight of each stand should be minimum 5.22 KG and the cost of welding, jointing, painting and nut/ bolts etc. as required to complete the job to the entire satisfaction of EIC. This also includes the painting with the 2 coats of black paint after 1 coat of primer of superior quality.

DSR 11.4 Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4 X 16 sq. mm

3½ X 25 sq. mm

3½ X 35 sq. mm

3½ X 50 sq. mm

3½ X 70 sq. mm

3½ X 95 sq. mm

3½ X 120 sq. mm