REPAIR TO GRC CHAJJA, BRICK WORK, PLASTERING WORK AND OTHER MISC WORK AT GRC UNDER GE KAMPTEE.

Amount

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and as directed.

M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L PCC 1:3:6 type C1( using 20mm graded stone aggregate) as in coping including weathering throating and necessary formwork complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed .200ext 300int complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using and including liquid waterproofig compound as per manufacturers instruction and finished Fair and even without using extra cement complete all as specified.

Material & labour for Rendering 10 mm thick on brick or concrete surfaces in CM 1:6, finished even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of old plastered surfaces of wall & applying two coats of oil emulsion over a coat of 1mm thick Birla wall care putty complete all as specified and as directed.

M&L for preparation for old surfaces of wall applying two coat of cement base paint on wall over chalk whiting primer etc complete all as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over coat of primer and 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of interal wall and applying two coats of Royal emulsion over coat of primer and 2mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of and applying two coat of acrylic low VOC emulsion with silicon additives an anti- algal ultima & high performance water based paint long lasting silk finish over a coat of waterproofing coat formulated with elastomeric & resilient acrylic polymer primer & reinforcing synthetic fiber including rubbing the surface by emery paper etc, material be applied as per manufacturer's instruction complete all as specified and directed.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish off the premises complete all as specified and directed.

M & L PCC 1:4:8 , type D2, (40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M & L forFormwork to rough faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified and as directed.

M & L forFormwork to fair faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses,etc.; vertical or to batter complete all as specified and as directed.

M & L for RCC type B1 (1:2:4) (using 20mm graded stone aggregate) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

M & L for RCC type B1 (1:2:4) (using 20mm graded stone aggregate) as inFoundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

S&F milt steel TMT bars 10 mm dia and over , cut to length, bent to shape requred, including crancing bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out Soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specifed and directed.

Removing excavated material exc. 500m n exc 1.5 KM and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specifed and directed.

Removing building materials etc. to a distance of exc 5.0 km under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

M&L for PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame icluding dismantling of old pvc panelling as per specifications complete all as specified and directed.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame incl pvc strip complete all as specified and as directed.

Taking down shutters only of any description area not exc 1.00 sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 sqm but not exc 2.00 sqm complete all as specified and directed.

S&F steel windows with side hung shutters factory made incl box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

All as per item No 28 above but without glazing bars complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges steel peg stay with glazing bars , complete all as specified and as directed.

S&F framed work such as grills, etc with ends of bars shouldered and or reverted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane in each pane including taking down old broken glasses complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in a square n exc 0.5 Sq m in each pane including taking down old broken glasses complete all as specified.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm wood grain colour (or match with shutter) PVC sheet reinforced with MS square tube opening as per drawing complete all as specified and as directed.

S&F 30mm thick factory made solid PVC panelled door shutter (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet strip of 20mm width struck inside with solvent cement for styles and plain colour PVC sheet for top rail, both rail of bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the style and rail with suitable PVC sheet beading and jointed together with solvent cement etc fixed with frame at site complete all as specified and directed.

S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC 'C' channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

M&L for preparation old steel and iron surface not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F fixing aluminium grill for windows in approved design/ pattern by Engineer-in-charge, fixed with aluminium beading complete all as specified and directed.

S&F 100mm long stainless steel butt hinges. heavy weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 100mm long butt hinges med wt cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and as directed.

S&F in repair 300 mm long Aluminium sliding door bolts, bolt type bolt 16 mm dia with and including a min of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F 150mm long Aluminium handles, cast type, anodised complete all as specified and as directed.

S&F 200mm long fancy type brass skeleton tower bolts with cast brass plate and staples and rolled or drawn brass bolt and fixed and 12 mm dia fixed complete all as specified and as directed.

S&F 250 mm long fancy type brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs. 45,600.00]

M/s T.S.JOHAR (BID ID -3135948)

M/s Rahul Traders (BID ID -3136935)

DE PRETTY AND CO (BID ID -3128879)

VIJ ASSOCIATES (BID ID -3129821)