Repair of roof and other repair work of of PHC Nanwana

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres (firty metre) lead of G.S. Sheet as per directions of engineer-in-charge . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government .

Providing and fixing 0.60mm (Zero point sixty millimeter) thick prepainted steel sheet in roofing of Tata / Sail / Reliance / Jindals with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNV) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and fixing ridges or hips 60 cm (Sixty centimetre) overall with 0.60mm(Zero point Sixty mili mlilimetre) thick prepainted galvanised steel sheets of Tata / Sail / Reliance / Jindals in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns (Twenty microns) over 5 microns (five micron)primer coating + back coat of polyster of 5 microns over 5 microns (five Micron over five micron) primer coating 0.60mm (zero point sixty millimetre) thickness (having 1060 mm (one thousand sixty millimetre covered with overall width 1126mm (one thousand one hundred twenty six millimetre) i/c fixing with prepainted iron J or L hooks, bolts & nuts 8mm(eight milimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing valleys of 90 cm (ninety centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 1.60 mm (one point sixyty ) thick with zinc coating not less than 350 gm/m² ) (three hundred fifty gram per square metre) as per the direction of Engineer in Charges including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. as per directions of engineer-in-charge . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government .

Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc complete (frame work to be seperatately) 6 mm (six millimetre) thick Cement fiber board as per IS: 14862 as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson tiles, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm (three point three kilogram per square metre) including pointing the joints with white cement and matching pigment etc., complete as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 (Ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (Fourty milimetre) flush bend, Hindware/ Cera/ Jaquar of star white / Snow white shade overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid complete as per the direction of Engineer in Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre ) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred millimetre) with a pair of 15 mm (fifteen millimetre) C.P. brass pillar taps as per the direction of Engineer in Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixingwhite vitreous chinapedestal for wash basin completely recessed at the back for the reception of pipes and fittings. as per the direction of Engineer in Charge including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.