Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹61.8 LAdmitted-Finance FR 92 6 PHASE II SAILASHREE VIHAR CHANDRASEKHARPUR BBSR 751021 | KHORDHA | ODISHA | 751021 | -35.50% | ₹61.8 L | L1 | Admitted-Finance |
| 2 | L2₹69.2 L+₹7.4 L (11.9%)Admitted-Finance AT BADAHAT PO PS KENDRAPARA DIST KENDRAPARA BALASORE | KENDRAPARA | ODISHA | 754134 | -27.80% | ₹69.2 L+₹7.4 L (11.9%) | L2 | Admitted-Finance |
| 3 | L3₹77.4 L+₹15.6 L (25.3%)Admitted-Finance 94 BAPUJI NAGAR BHUBANESWAR | KHORDHA | ODISHA | 751001 | -19.21% | ₹77.4 L+₹15.6 L (25.3%) | L3 | Admitted-Finance |
Tender Value
₹95.8 L
EMD Value
₹96,000
Closing Date
3 Jul 2026, 6:00 pmClosed
Divisional Head, Elect-II, IDCO, BBSR
O/O DH Elect-II, IDCO Tower, BBSR
Supply, Installation, Testing and commissioning of different type of led fitting fixtures for kalamandal project, Bhubaneswar
2026_IDCO_132341_1
BBSR/ELECT-II/e-04/26-27
National Competitive Bid
Electrical Works
Percentage
60 days
Kalamandala
Please refer the bid document
2 documents required · 2 mandatory
₹11,800
₹96,000
18 Aug 2026
19 Jun 2026
4 Jul 2026
19 Jun 2026
3 Jul 2026
19 Jun 2026
19 Jun 2026 - 3 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with all accessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. | - | - | - | - |
| 3 | 20W High efficient LED batten surface/wall mounted Specially designed Extruded Aluminium Housing channel in thermally conductive material with HET diffuser. In-built electronic driver duly wired up to terminal block.IP20, CRI >80, Temperature range-0 to 45DegC, Driver efficiency>85%, Power factor>0.9, CCT - 6500K, THD<20%, Surge protection 2kV, 50000 burning hours as per L70 Criteria, Multistage Isolated Constant Current operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 2000 lumens. | - | NOS | 812 | - |
| 4 | 15W, High efficiency surface/suspended downlighter designed with die cast aluminium powder coated housing. High efficient transmissivity diffuser provides soft light. CRI>80, IP20, Ambient temp- 0 to 45 DegC, Driver efficiency>85%, THD<20%,Powerfactor>0.9, CCT - 4000/5700K, 50,000 hrs @ L70 life. Surge protection-3 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1500 lm. | - | NOS | 1,186 | - |
| 5 | 3W, High efficient LED with PDC Aluminium housing with polycarbonate clear diffuser.CRI>70, IP66, CCT - 3000K, Ambient temp-0 to 45 DegC, Driver efficiency>85%, THD<25%, Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage driver and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. | - | NOS | 2,360 | - |
| 6 | Integral, SMD LED, IP 65, IK10, LED Surface mounted Bulkhead fixture with System efficacy of more than 100 lm/W (1000 lumens). Luminaire shall be made up of Die Cast Aluminium for efficient heat dissipation. Luminaire shall have Polycarbonate high transmitivity diffuser for Uniform illumination and wider light distribution. LED luminaire shall have specially design aluminum heat sink for excellent heat dissipation, good air circulations as well as very light weight. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED.The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 2.5 KV internal surge protection, Power factor greater than 0.9 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 | - | NOS | 1,436 | - |
| 7 | Supply of SMD 50W LED Floodlight fixture with System efficacy of 115 lm/W (5750 lumens). Luminaire shall be made up of die cast Aluminium housing with PC fresnel lens diffuser. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall be with IP66 protection. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 70. LED Driver shall be potted, Integrated type, Multistage, Isolated, APFC Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage < 60V DC as per IEC standard., Driver Efficiency > 85% & 4 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012. | - | NOS | 3,733 | - |
| 8 | Integral, SMD 2x2 LED, IP 20, 36W LED Recess mounted fixture with System efficacy of more than 100lm/W and system lumen output 3600lm. Luminaire shall have satin finished translucence (HET) diffuser for Uniform illumination and wider light distribution. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire shall use SMD type LED. The LED shall be compliant with LM80-08 standard with L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be Multistage, Isolated type, APFC, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Complying to SELV < 60V DC standards. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012 | - | NOS | 2,185 | - |
| 9 | 10W/12W, High efficiency recess mounted downlighter designed with die cast aluminium powder coated housing. High efficient transmissivity diffuser provides soft light. CRI>80, IP20, Ambient temp- 0 to 45 DegC, Driver efficiency>85%, THD<20%,Powerfactor>0.9, CCT - 4000/5700K, 50,000 hrs @ L70 life. Surge protection-3 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 1200 lm. | - | NOS | 1,061 | - |
| 10 | 6W, High efficiency recess mounted downlighter designed with die cast aluminium powder coated housing. High efficient transmissivity diffuser provides soft light. CRI>80, IP20, Ambient temp- 0 to 45 DegC, Driver efficiency>85%, THD<20%,Powerfactor>0.9, CCT - 4000/5700K, 50,000 hrs @ L70 life. Surge protection-3 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 150-270V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 480 lm. | - | NOS | 812 | - |
| 11 | Non-integral flexible LED strip light with high brightness for indoor applications. Strip can be cut at marked interval to suit desired length. 35,000 burning hours as per L70 Criteria, Ambient temp-0 to 45DegC, Driver efficiency>85%, CCT - 6500K, THD<20%, Powerfactor>0.9, Surge protection in CM-3kV, Multistage Isolated Constant Current Operated driver with range 100-300V AC and Safety Extra Low Voltage Safe level<60V DC as per IEC standard. Luminaire lumen ≥ 350 lumens/meter | - | NOS | 2,060 | - |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.72 MB
BID.pdf
Tender Documents • 1.69 MB
BOQ_596970.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .