Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹7.7 L
EMD Value
₹19,350
Closing Date
15 Sept 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
PDO GP JALLAPUR
SUPPLY OF MATIRIALS TO NRLM SHED WORK UNDER MGNREGA FOR JALLAPUR GRAMA PANCHAYATH SAVANUR TALUK HAVERI DIST
RDPR/2025-26/IND10668/CALL-2
RDPR/2025-26/IND10668/CALL-2
Open
Two Tender Document System(Two Cover)
RDPR Gram Panchayat Office Jallapur TP Savanur
3 documents required · 3 mandatory
All required documents should be as per tender document
₹500
₹19,350
3 Sept 2025
3 Sept 2025
17 Sept 2025
15 Sept 2025
Broken stone aggregate 40 mm size_NRLMJLPR
Broken stone aggregate 20 mm size_NRLMJLPR
Broken stone aggregate 12 mm to 10 mm size_NRLMJLPR
Coarse sand (zone III)_NRLMJLPR
Portland Cement_NRLMJLPR
Mixer (concrete) - 1 cum Capacity_NRLMJLPR
Add watering charges at 1 percentage on Material_NRLMJLPR
Formwork, Centering and Scaffolding For Columns and Piers_NRLMJLPR
Plasticizer or super plasticizer_NRLMJLPR
HOM of Vibrator 0.71 days_NRLMJLPR
Size stone 20 x 20 x 25 cms_NRLMJLPR
Bond stone 20 x 20 x 45 cm_NRLMJLPR
Boulders_NRLMJLPR
Mixer (concrete small used in culvert)_NRLMJLPR
Jungle wood runners and planks_NRLMJLPR
Silver oak or equivalent planks 38 mm thick_NRLMJLPR
Casurina poles 100 to 150 mm_NRLMJLPR
Add Handling , loading and unloading at 2percentage on Material_NRLMJLPR
Add watering charges at 1 percentage on Labour_NRLMJLPR
Burnt bricks class 35 (non modular)_NRLMJLPR
Add Handling , loading and unloading at 1percentage on Material_NRLMJLPR
Solid Concrete Block (40x15x20 cms) 5.00 N or sqmm_NRLMJLPR
Mason Class I (with tools)_NRLMJLPR
Casurina Poles 75 to 100 mm dia_NRLMJLPR
TMT bars Fe 500_NRLMJLPR
Binding wire_NRLMJLPR
Mathi or Nandi wood planks for panels 25 mm thick_NRLMJLPR
Add cutting and other wastage 5 percentage_NRLMJLPR
HOM of Machinaries for planing_NRLMJLPR
Unit Cost as per the Specification_NRLMJLPR
Honne wood_NRLMJLPR
Honnewood planks for panels 20 mm thick_NRLMJLPR
T section_NRLMJLPR
Mullion section_NRLMJLPR
MS clamps_NRLMJLPR
Handles_NRLMJLPR
Hinges 5 heavy duty_NRLMJLPR
TW beading for fixing glass_NRLMJLPR
Reeded glass 2 mm thick_NRLMJLPR
Z section_NRLMJLPR
Fitter Class I_NRLMJLPR
Welder Grade I_NRLMJLPR
Ready mix primer paint (Ready mix red lead paint)_NRLMJLPR
Add Wire brush, fine steel wool, putty, sand paper, at 3 percentage on cost of paint_NRLMJLPR
Painter Class I_NRLMJLPR
Add providing and removing scaffolding at 3 percentage on Labour_NRLMJLPR
Dry distemper_NRLMJLPR
Whitening_NRLMJLPR
Add Brush, putty, glue at 5 percentage on cost of paint_NRLMJLPR
Distemper primer_NRLMJLPR
Add Brush, putty at 5 percentage on cost of distemper primer_NRLMJLPR
water proofing cement paint_NRLMJLPR
Add Brush, putty, sand paper at 2 percentage on cost of paint_NRLMJLPR
Mason Class II (with tools)_NRLMJLPR
Enamel paint_NRLMJLPR
Add Brush, putty, sand paper at 3 percentage on cost of paint_NRLMJLPR
Vitrified tiles 600x600 mm_NRLMJLPR
Ceramic tiles 30 x 30 cms_NRLMJLPR
White cement_NRLMJLPR
Glazed tiles 300x450_NRLMJLPR
Border Tiles 30 x 10 cms_NRLMJLPR
Add White cement for pointing at 2 percentage on Material_NRLMJLPR
Indian type water closet of size 580 mm of specified make with footrests_NRLMJLPR
S or P trap 100mm_NRLMJLPR
Add White lead paint, gasket, cement, sand for making good the wall and floor at 2 percentage on Material_NRLMJLPR
White vitreous china clay flat back wash basin size 550x400mm_NRLMJLPR
Copper plated brass piller tap 15mm_NRLMJLPR
CP brass chain with plug_NRLMJLPR
CP brass waste 32 mm of standard pattern_NRLMJLPR
Brass stop cock_NRLMJLPR
C.I. M.S. brackets for flushing cistern_NRLMJLPR
Lead or PVC connection pipe 32mm dia (for wash basin)_NRLMJLPR
Licenced Plumber with tools_NRLMJLPR
Polyenthylene water storage tank of specified capacity L_NRLMJLPR
Labour charges for lifting and placing in position and making connection at 7 percentage on Material_NRLMJLPR
Handling loading and unloading 3 percentage on Material_NRLMJLPR
PVC pipe of 10kg cum,110 mm_NRLMJLPR
PVC pipe of 6kg cum,63 mm_NRLMJLPR
PVC pipe of 4kg cum,75 mm_NRLMJLPR
Add Cement sand and grit 1percentage on Material_NRLMJLPR
Add 5 percentage for fittings and wastage charges_NRLMJLPR
Polythylene pipes high density 32mm external dia_NRLMJLPR
Bib cock 20mm nominal bore_NRLMJLPR
Cost of 6.5mm M.S. Coil_NRLMJLPR
Fabrication charges._NRLMJLPR
Transportation charges of materials beyond 5 KM at 10percentage_NRLMJLPR
Labour charges for handing errection of RCC rings etc. at 5 percentage_NRLMJLPR
Lumpsum Material_NRLMJLPR
Display Board or CIB_NRLMJLPR
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
nrml Jallapur Tender dacoment (1).docx
Tender Document • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .