(1)Providing RGM Siding and allied facilities at Billimora, Sachin, Bhestan and Surat in connection with Virar - Surat - Providing RGM Siding facilties at Golvad, Billimora, Sachin, Bhesthan & Surat. and (2)Joravasan - Surat Sec.:- Rag picking and removal of debries, grass,etc. for Two Year in the jurisdiction of DEN/Central. (Composite Tender including Electrical Portion)

B-USSOR ITEMS-2021 (related to Bridge work) 8469974.49 Below/P

C- USSOR ITEMS-2021 (related to Track work) 14194432.02 Below/P

D-USSOR ITEMS-2021 (Supply of Ballast on cess) 1792303.82 Below/P

E-ALL NS ITEMS (related to Civil work) 1035486.72 Below/P

F-ALL NS ITEMS (related to Track work) 3780965.07 Below/P

Item Breakup - A-ALL DSR ITEMS 2021

Item Breakup - B-USSOR ITEMS-2021 (related to Bridge work)

All kinds of soils Total 327889.92 Item- 2 Chapter 2 & 3 - Concrete related items S No. Item No Description of Item Unit Qty Rate Amount

Providing and laying in position cum machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved p l a n t s ) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the following Reinforced cement concrete structural elements up to height of 9.0 m from foundation top level, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as p e r specifications and direction of t h e Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item.

Abutment & Pier

Wing wall and Return wall

Abutment cap, Pier Cap, Inspection cum Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc.

Providing and laying Plain Cement cum Concrete 1:3:6 with graded stone aggregate of 40mm nominal size, in foundation and floors, retaining walls of bridges including mechanical mixing, vibrating, pumping and bailing out water where ever required with all materials and labour complete but excluding the cost of cement and shuttering as per drawings and technical specifications as directed by Engineer. Centering and shuttering including strutting, propping etc. and removal of form for :

All types of bridge sub-structures, Sqm e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level

All types of bridge super-structures, Sqm e.g. slabs, I-girders, T-girders, Box girders etc. up to 5m above ground level. MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Providing and launching in position cum machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the Precast Prestressed (Post- tensioned) Concrete Girder/Box Girders/Slabs in contactor's casting yard in the vicinity of worksite, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability, complete as per drawings, specifications and direction of the Engineer. Note: 1. Payment for Shuttering, Cement, Reinforcement, HTS cables, Sheathing, Anchorage Cones, stressing of cables, grouting of the ducts and launching of girder/slab in position shall be made extra under relevant items. However, deduction shall be made in case of slab as per relevant item. 2. For pre-cast item, loading in transport vehicle in casting yard is included and shall not be paid extra. 3. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons at the stage of Mix Design and in that case deduction shall be made as per relevant item. Total 3244907.32 Item- 3 Chapter 2 - Supply and using cement at worksite S No. Item No Description of Item Unit Qty Rate Amount Supply and using Cement at Worksite

Ordinary Portland Cement 53 grade MT of approved brands/makes Total 3043322.84 Item- 4 Chapter 2 - Supply of steel/fabrication items S No. Item No Description of Item Unit Qty Rate Amount Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars Kg of grade Fe-500D or more of approved brands/makes. Total 2793360.00 Item- 5 Chapter 3 - Cables Items S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Providing, fabricating & fixing in MT position to exact design profiles, H.T.S. cables of all classification made from Low Relaxation strands conforming to IS:14268- latest version in Prestressed (Post- tensioned) Concrete girders/slabs etc. including supplying, cutting, making into cables with necessary spacers, colour coding, protecting with water soluble oil at all time, anchoring of cables, supplying and placing spiral corrugated type galvanized metal steel ducts sheathing made up of Cold Rolled Cold Annealed (CRCA) mild steel conforming to IS:513 of required diameter/ thickness, vent pipe, placing, bending, routing, fixing, stressing & grouting of cable ducts with cement grout, Anchorage sets in required number with provision for future prestressing if any including all lead and lift with contractor's own materials, labour, equipments etc. complete as per drawings & specifications. Rate also includes covering anchorage pads with epoxy mortar of approved quality to avoid corrosion. Cement for grouting to be paid separately. Payment shall be made in terms of weight of HTS cables as per drawing. Total 1085004.78

Item Breakup - C- USSOR ITEMS-2021 (related to Track work)

Using Soil Class SQ3 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Mechanical blanketing material by using only hard and durable stone crushed in mechanical crusher to different gradations, wet mixing of the same in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. Note: This item shall be used only when entire constituent of blanketing material is mechanically manufactured by crushing of hard and durable stone into desired gradation of designed proportion.

Manufacturing material by wet mixing of naturally available suitable soil including additional blending with naturally available or manufactured material as required to achieve specified gradation, in designed proportion in Pug mill or wet mix plant to have uniform gradation including all incidental transportation, laying over finished formation in uniform layer(s) with motor grader, compaction with suitable vibratory roller to specified density and finishing to correct profile, complete as per RDSO Specification No. RDSO/2020/GE: IRS-0004 with latest correction slips. Total 11729232.00 Item- 2 CHAPTER 6 : Rails, Sleepers and Fittings Renewal S No. Item No Description of Item Unit Qty Rate Amount Pulling & positioning of rails accurately on cess including supporting rails, providing required gap and squaring at ends for renewal preparation, as directed by Engineer in-charge.

Up to 40 m long rail panel Gas cutting of rail of various sections with contractor's tools & plants, as directed by engineer in- charge :

Rail section of 52Kg and above Total 27302.00 Item- 3 CHAPTER - 7 : Turnouts and Renewals S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Laying and linking of turnouts of all types including diamond crossings & Derailing switches with 52Kg / 60Kg rail section on PSC sleepers on prepared ballast bed for New lines or during total closure of section at indicated location as per standard drawing, duly leading sleepers, rails, switches, crossings, fastenings including rail cutting, drilling, fixing of all components, fittings with housing of tongue rails as per requirement of signaling, preparing ballast bed, filling and spreading of ballast as required, linking of turnout with track, attending track parameters including lifting, providing one round of packing to make track fit for 20 kmph speed including lubrication of fittings/fastenings, complete as directed by Engineer in-charge.

1 in 8½ Turnouts Lifting the newly inserted BG 60 Kg. / 52 Kg. turnouts/ trap switches to required level to provide full ballast cushion as per approved drawings after initial laying with Railway's stone ballast in convenient stages including one round of through packing after completion of final stage of lift, levelling, aligning, gauging and boxing to standard profile to make it fit for 20 kmph with all lead and lifts, complete in all respect and as directed by the Engineer-in-charge. Note: 1. The item shall be used only when UNIMAT is not available for the work before the turnout is opened for operation. 2. Leading and dumping of ballast will be paid separately under relevant item.

For 1 in 8½ Points & Crossing Total 409197.67 Item- 5 CHAPTER - 8 : Deep Screening and Ballast Related Activities S No. Item No Description of Item Unit Qty Rate Amount Recoupment of ballast in running line with railway's stone ballast from existing stacks available along alignment either on top of cutting or on cess or at toe of bank by head leads or by any other means and spreading to make up deficiency in the required profile with contractor's labour, tools & plants, as directed by Engineer-in- charge. Note: Payment shall be made based on ballast stack measurement.

For average lead up to 50m and lift cum up to 5m MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Lifting and packing for regrading TRM the existing PSC sleeper track to required height / level in stages not exceeding 75mm or part thereof at a time, providing permissible ramp for the track, insertion of moorum / sand / stone ballast uniformly under the existing track and placing the same to safe approved gradient, gauge, cushion including levelling and one round of through packing to allow train movement at restricted speed of 30 kmph for a specified length with all leads & lifts and fixing, marking, painting rail level pegs at every 30m interval. Note: Lifting of track shall be done in stages as per procedure prescribed in latest edition of IRPWM to get the proposed final level as per approved working profile, as directed by Engineer in- charge.

Extra for additional lift over 75mm TRM for every 50mm lift or part thereof up to 275mm for item nos. 083010 for each TRM.

Boxing and profiling of ballast as TRM per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. Total 231876.60 Item- 6 CHAPTER - 12 : Activities at Construction Sites S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Linking of BG track (except at LC, Bridges and SEJs) with any type of rail section and sleeper of specified density, on ballast bed spread and compacted with suitable roller, over prepared formation including leading free rails/welded panels available along the alignment on to formation, leading and spreading all fittings and fastenings, spreading of sleepers at specified spacing, squaring, placing of rails over sleepers and fixing rails to sleepers with all types of fittings and fastenings to correct gauge & alignment, lubrication of fittings and fastenings with contractor's grease as per IRPWM standards with contractors labour, tools, consumables, with all lead, lifts etc. complete and raising, levelling and initial packing of track to make it fit for 30 kmph and meet other prerequisites prescribed in Indian Railway Track Machine Manual for deployment of Tamping Machine. N o t e : 1.Rail cutting and Hole drilling shall be paid separately. 2.Spreading of ballast and compaction shall be paid separately under relevant item.

For sleeper density sleepers per km

Construction of Sanded Dead End Each as per RDSO's Drawing no. RT-347 (with all amendments) with brick- work using country bricks or CC bricks in mud mortar and filling with river coarse sand, surrounding rails and filling around. Note: Cost of brick and sand is not included in the rate. Total 302479.60 Item- 7 CHAPTER - 13 : Maintenance Activities S No. Item No Description of Item Unit Qty Rate Amount Through packing of track, as per procedure prescribed in latest edition of Indian Railways Permanent Way Manual

For PSC sleeper Track with Sleeper TRM Density of less than 1540 Sleepers/Km MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY De-stressing of LWR/CWR track of any density under traffic line block with contractor's labours, tools, equipments and consumables inclusive of all lead & lift. Activities include cutting of LWR/CWR into convenient panels of specified length, removal of ERCs, liners, greasing of ERCs and liner contact area, lifting rails and keeping them on rollers provided at every 15 sleepers, working out elongation of rail ends depending on prevailing site conditions, pulling rails with the help of Hydraulic Tensor to achieve the desired elongation, cutting rails, as required, removing rollers and placing rail in position, re-fixing ERCs & liners and adjustment of gap at SEJs : Note: (1) Welding of rail joints will be paid separately. (2) Rail cutting and Hole drilling shall be paid separately. (3) Opening and closing of LC if required will be paid separately. (4) As per procedure prescribed in latest edition of IRPWM & CE's Circulars for destressing of LWR/CWR, if any.

With Contractor's Hydraulic Rail TRM tensor Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

For 60 Kg Rails Total 243900.22 Item- 8 CHAPTER - 16 : Small Track Machines S No. Item No Description of Item Unit Qty Rate Amount Quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)

60 Kg - 110/90 UTS - Outside Track Each

60 Kg - 110/90 UTS - On Running Each Line MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Drilling holes of 16 mm to 32 mm dia. with Rail Drilling machine including chamfering with appropriate chamfering tools in all types of rail section with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Rail Drilling Machine will be as per RDSO Specification No. TM/SM/3, dated 24.04.1991.

On Running Line

Drilling holes of specified size for Each bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractor's tools and plant, equipment, consumable, labour etc complete as directed by the Engineer in charge at site. Total 56010.24 Item- 9 CHAPTER - 17 : Handling of Materials S No. Item No Description of Item Unit Qty Rate Amount Loading of rails of any section and length up to 13 metres in Wagons / Truck / trailer including lead up to 50 metres and lift up to 5 metres.

I n Wagon handling is possible a n d traffic block is not required or in Truck/trailer. Loading of tongue rail, stock rail, switch assembly and crossings of any section and length, SEJ, Glued joint etc. with / without P.Way fittings and fastenings, in Wagon / Truck / trailer including lead up to 250 metre and lift up to 5 metre.

I n Wagon handling is possible a n d traffic block is not required or in Truck/trailer. Loading, leading and unloading of 52Kg / 60Kg rail up to 13 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic with line protection in case road carriage is not possible with different lead with a lift up to 5 metre during block period.

For lead up to 500 metre.

For lead beyond 500 metre and up MT to 1 Km.

Extra to Item no. 171031 and MT 171032 with contractor's Rail Dolly / Dip Lorry MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Loading, unloading and hauling of 52Kg / 60Kg rail more than 13 metre and up to 39 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic and line protection in case road carriage is not possible for different leads and lift up to 5 metre.

For lead up to 500m

For lead beyond 500 metre and up MT to 1 Km

Extra to Item no. 171041 and MT 171042 with contractor's Rail Dolly / Dip Lorry Unloading of rails of any section and length up to 13 metre, in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/trailer including lead up to 50 m e t r e , lift up to 5 metre and stacking in prescribed manner.

From Wagon where mechanical MT handling is possible a n d traffic block is not required or in Truck / trailer. Unloading of rails of any section and length from 13 metre to 39 metre, in neat manner for Railway usage from departmental material train (DMT) including lead up to 50 metre and lift up to 5 metre.

Not involving traffic block or in MT lines not opened to traffic Loading of 52kg / 60kg PSC normal line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in a neat manner to departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

I n Wagon handling is possible a n d traffic block is not required or in Truck / trailer MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Loading of 52kg / 60kg PSC line and special sleepers beyond 2.75 metre length including existing fittings and fastenings in Depot / Station / Mid-section between stations in a neat manner to departmental material train (DMT) or contractor's / Railway's Truck/trailer with crane or any other means including crossing of one track with free lead up to 250 metre and lift up to 5 metre, if required with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

I n Wagon/Truck / trailer where MT mechanical handling is possible and traffic block is not required. Loading, leading and unloading of PSC Sleepers of 52Kg / 60Kg by Railway's Rail Dolly/ Dip Lorry to the nominated location under traffic in case road carriage is not possible for different leads and lift up to 5 metres.

For lead up to 500 metres

For lead beyond 500 metre and up MT to 1 Km

Extra to Item no. 172031 and MT 172032 with contractor's Rail Dolly/Dip Lorry. Loading, leading and unloading of all types of P.Way fittings and all other miscellaneous material except Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: Lead shall be the shortest motorable road length between the points of loading and unloading.

Lead up to 5 Km Transportation of Rails, sleepers, switches, crossings, SEJs and Glued Joints by road vehicles for different leads. Note: 1 . Lead shall be the shortest motorable road length between the points of loading and unloading. 2. Loading and unloading shall be paid extra under relevant items.

Lead up to 5 Km

Lead beyond 5 Km and up to 10 km MT

Lead beyond 10 Km and up to 20 MT km MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Unloading of 52kg / 60kg PSC line and special sleepers up to 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 250 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

From Truck / Trailer Unloading of 52kg / 60kg PSC special sleepers beyond 2.75 metre length in Depot / Station / Mid-section between stations in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with crane or any other means including crossing of one track and lead up to 50 metre & lift up to 5 metre with contractor's labour, tools & plants, machinery, consumables etc. Note: In case of any damage to sleeper during loading, penalty @ 50% of the all inclusive cost of sleeper shall be levied.

From Truck / Trailer Unloading of Switches / Crossings / SEJ Rails / Glued Joints of any rail section and length with or without P.Way fittings & fastenings in neat manner for Railway usage from departmental material train (DMT) or contractor's / Railway's Truck/Trailer with lead up to 250 metre & lift up to 5 metres.

From Truck / Trailer Total 632185.74 Item- 10 CHAPTER - 21 : Miscellaneous Items S No. Item No Description of Item Unit Qty Rate Amount Erection or removal of temporary Engineering Indicator Board or any other board at specified locations without causing infringement to track etc. complete and as directed.

For removal Hiring of machinery for minor miscellaneous works for short duration including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

JCB Backhoe Loaders 3DX Plus or Hour similar with minimum 1.10 cum bucket capacity

Hydra or similar tyre mounted Pick- Hour n-Carry crane of 12T capacity for misc. works of handling of material

Tractor with Trolley for transportation or other misc. works.

Arranging labour as and when Day required by the Engineer in charge, for various works under SSE/P.Way, with contractor's T&P, equipments, hand signal flags, etc. as per specifications, special conditions and detailed scope of work as furnished in the tender and as directed by the Engineer in charge. Note: Item shall be operated with prior approval of concerned Sr. DEN / DEN in charge. Total 406077.80

Item Breakup - D-USSOR ITEMS-2021 (Supply of Ballast on cess)

When distance of nearest quarry is cum up to 10 km Total 1675050.30

Item Breakup - E-ALL NS ITEMS (related to Civil work)

Uncoursed RUBBLE FILLING (in work like rubble filling behind abutments etc) without any special dressing of stones. Rate includes loading, unloading, T&P, Transportation, taxes etc. complete. Total 1035486.72

Item Breakup - F-ALL NS ITEMS (related to Track work)

Unskilled labour component only Per Joint for thermit welding of 52/60 kg rail joints by SKV process only with contractor's labour and tools required for the successful completion of work such as loading and leading of all required materials, tools and plants for welding to site of work and depositing the same after completion, re spacing of sleeper for fixing of mould as required for welding, removal of traction bonds, picking of fish plates etc. complete for finished item of work. After welding has been completed joggled fishplate with bolts/clamps and wooden block is to be provided, re-spaced sleeper is to be squared and packed brought back to its proper position before leaving the site as per direction of site supervisor. Total 71232.39 Cleaning of tracks by collecting waste plastic bottles,plastic bags, papers textra packs and others wastematerials etc. on the all lines and disposal of collectedmaterials beyond Railway's limit Item- 2 complete with including allcosts with contractors' own labours, crossing of tracks,lead lift, loading and unloading taxes etc as per direction ofEngineer in charge of work ( Nothing shall be supplied byRailway). S No. Item No Description of Item Unit Qty Rate Amount

UP/DN main line

Yard locations Total 3709732.68

Item Breakup - G-All Electrical NS Item

Supply of material and providing Numbers light/fan point wiring in PVC casing capping / PVC conduit, as per site requirement, with single core multi- strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. with set of 3 wires for phase, neutral & earth and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. Total 143200.00 Item- 2 Supply of material and providing main/ submain wiring, in PVC casing S No. Item No Description of Item Unit Qty Rate Amount

Supply of material and providing Running main/ submain wiring, in PVC Metre casing capping / PVC conduit, as per site requirement, with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm. with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. Total 123200.00 Item- 3 Supply of material and providing main/ submain wiring, in PVC casing S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply of material and providing Running main/ submain wiring, in PVC Metre casing capping / PVC conduit, as per site requirement, with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm. with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. Total 120000.00 Item- 4 Supply and fixing of modular concealed/ surface mounting box of four S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular Numbers concealed/ surface mounting box of four module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 2780.00 Item- 5 Supply and fixing of modular concealed/ surface mounting box of six S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular Numbers concealed/ surface mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 3360.00 Item- 6 Supply and fixing of modular concealed/ surface mounting box of eight S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular Numbers concealed/ surface mounting box of eight module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 3980.00 Item- 7 Supply and fixing of modular concealed/ surface mounting box of S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular Numbers concealed/ surface mounting box of twelve module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 4840.00 Item- 8 Supply and fixing of modular concealed/ surface mounting box of S No. Item No Description of Item Unit Qty Rate Amount

Supply and fixing of modular Numbers concealed/ surface mounting box of sixteen module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III. Total 5200.00 Item- 9 Supply, fixing, testing & commissioning of modular socket 3 pin of 6A S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, commissioning of modular socket 3 pin of 6A capacity with 10A one way modular switch, as per specifications in Annexure IV. Total 19800.00 Item- 10 Supply, fixing, testing & commissioning of modular power socket 3 pin S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of modular power socket 3 pin twin heavy duty of 6/16 A capacity with 20A one way modular switch having neon indicator, as per specifications in Annexure V. Total 12040.00 Item- 11 Supply, fixing & commissioning of weather proof modular power S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of Numbers weather proof modular power socket 3 pin twin heavy duty of 6/16A capacity with 20A SP modular MCB in enclosure made of non metallic polycarbonate thermoplastic material, IP 65, as per specifications in Annexure VI. Total 60000.00 Item- 12 Supply, fixing & commissioning of single phase 20A, 230V, DP S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of Numbers single phase 20A, 230V, DP industrial type socket outlet, with phase, neutral & earth, metal enclosed plug top alongwith 20A DP MCB in SS enclosure, as per specifications in Annexure VII. Total 99560.00 Item- 13 Supply, fixing & commissioning of MCB DB single phase with RCCB, S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of Numbers MCB DB single phase with RCCB, I/C-DP MCB of 40A - 1No. & DP RCCB of 40A - 1No., O/G: SP MCB of 6A-32A - 8Nos, enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure VIII. Total 52936.00 Item- 14 Supply, fixing & commissioning of MCB DB three phase, I/C: MCB TPN S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing & commissioning of Numbers MCB DB three phase, I/C: MCB TPN 63A - 01 No & O/G: 1) MCB SP 10A- 04 Nos. 2) MCB SP 20A - 04 Nos. 3) MCB SP 32A - 04 Nos., enclosure made of non metallic polycarbonate thermoplastic material, IP 65 weatherproof, as per specifications in Annexure IX. Total 85280.00 Item- 15 Supply, fixing, testing & commissioning of LED street light lumaires S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

"Supply, commissioning of LED street light lumaires 45W maximum, whether proof having IP 65/66 protection, System efficacy greater than or equal to 120 lm/W, Lumen Output greater than or equal to 5400 lumens, Colour consistency CRI greater than or equal to 70. Driver Surge protection greater than or equal to 4KV, The luminaire should have a potted driver, mounted inside the luminaire. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaries complete with all accessories and other specifications as per Annexure X. (Minimum Warrantee - 5 years)" Total 358560.00 Item- 16 Supply, fixing, testing & commissioning of LED street light lumaires S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of LED street light lumaires 60W maximum, whether proof having IP 65/66 protection, System efficacy greater than or equal to 120 lm/W, Lumen Output greater than or equal to 7000 lumens, Colour consistency CRI greater than or equal to 70. Driver Surge protection greater than or equal to 4KV. The luminaire should have a potted driver, mounted inside the luminaire. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaries complete with all accessories and other specifications as per Annexure X. (Minimum Warrantee - 5 years) Total 165040.00 Item- 17 Supply, fixing and commissioning of waterproof junction box outdoor S No. Item No Description of Item Unit Qty Rate Amount

Supply, fixing and commissioning Numbers of waterproof junction box outdoor type, Ingress protection: IP 67, Impact resistance: IK 08, Material : high grade thermo plastic / glass fiber reinforced polyester, minimum size 130mmx 130mmx 75mm., with extra deep GI canopy, complete with all accessories, as per sample approved, specifications in Annexure XI. Total 27520.00 Item- 18 Supply, fixing, testing and commissioning of 250A, 4 pole electronic S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Supply, commissioning of 250A, 4 pole electronic / microprocessor based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XII. Total 253488.00 Item- 19 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC Metre sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 25 sq.mm.x 4 core, as per specifications in Annexure XIII. Total 336000.00 Item- 20 Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi S No. Item No Description of Item Unit Qty Rate Amount

Supply of XLPE insulated, PVC Metre sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 70 sq.mm.x 4 core, as per specifications in Annexure XIII. Total 742400.00 Item- 21 Supply, fixing, testing & commissioning of aluminium lugs of size 70 S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of aluminium lugs of size 70 sq.mm. for cable termination, as per specifications in Annexure XIV. Total 1875.00 Item- 22 Excavation of the cable trench in normal soil under rail/ road and S No. Item No Description of Item Unit Qty Rate Amount

Excavation of the cable trench in Metre normal soil under rail/ road and refilling back the excavated earth, restoring /repairing of flooring after lying of cable, as per specifications in Annexure XV. Total 114000.00 Item- 23 Excavation of the cable trench in hard soil under rail/ road/rocky soil S No. Item No Description of Item Unit Qty Rate Amount

Excavation of the cable trench in Metre hard soil under rail/ road/rocky soil / platforms (stone/RCC/Rock) and refilling back the excavated earth, recasting of flooring after lying of cable, as per specifications in Annexure XVI. Total 359200.00 Item- 24 Provision of horizontal boring underneath railway track to suit S No. Item No Description of Item Unit Qty Rate Amount MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY

Provision of horizontal boring Metre underneath railway track to suit insertion of 200mm nominal bore pipes at depth of 1.5 meter below the rail level, by mechanised method, and uPVC/FRP pipe of size 200 mm nominal dia., 6mm thick min., as per specifications in Annexure XVII. Total 274000.00 Item- 25 Supply and erection of RCC hume pipe half round of size 150mm (6") S No. Item No Description of Item Unit Qty Rate Amount

"Supply and erection of RCC hume Numbers pipe half round of size 150mm (6") dia x 1 mtr long: RCC half round pipes with collar should be casted as per cement concrete reinforcement procedure with standard size M.S rods. It may be provided below the road / drains / track crossings/crossing a building wall. The pipe shall be laid at a required depth from the ground level; however, the depth should be minimum 12" from the surface of the platform and minimum one mtr in soil, or as per Railway Engineer's instructions with due approval" Total 218000.00 Item- 26 Supply & fixing of G.I. pipe 'B' class 50mm dia for cable protection S No. Item No Description of Item Unit Qty Rate Amount

"Supply & fixing of G.I. pipe 'B' Metre class 50mm dia for cable protection: 1. G.I. pipe shall be of 50mm dia., B class good quality and conforming to IS 1239. 2. G.I. clamps for fixing the pipes shall be made from G.I. flats of 25mm x 6mm and shaped as per site requirement. 3. G.I. clamps shall be fixed with G.I. nut bolts of adequate size and of good quality. 4. It may be used underground for cable protection or parallel to the G.I. mast/Rail pole." Total 8800.00 Item- 27 Design, fabrication, transportation, supply & erection of 4 meter to 5 S No. Item No Description of Item Unit Qty Rate Amount

Design, fabrication, transportation, Numbers supply & erection of 4 meter to 5 meter length as per site requirement, hot dip galvanized iron sheet street light octagonal pole with foundation type base plate & foundation bolts, excluding foundation (Approximate Dimensions for pole: Top Diameter 70 mm, Bottom Diameter 130 mm, Section Length- 5000 mm, Thickness-3 mm, Foundation Type Base Plate (200X200X12 mm), Foundation Bolts (M16 X 600MM 4Nos).with two arm brackets min. 1000 mm long, suitable for LED s t r e e t light fitting, as per specifications in Annexure XVIII. Total 462200.00 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Item- 28 Design, supply of material & casting of RCC foundation with 1:3:6 S No. Item No Description of Item Unit Qty Rate Amount

Design, supply of material & Numbers casting of RCC foundation with 1:3:6 concrete suitable for 4/5 meter length GI street light octagonal pole, as per specifications in Annexure XIX. Total 89160.00 Item- 29 Supply of material & providing earthing with 'B' class G I pipe 3M long S No. Item No Description of Item Unit Qty Rate Amount

Supply of material & providing Numbers earthing with 'B' class G I pipe 3M long x 50mm dia, 3.2mm thick ISI marked, with earthing chamber & top cover, as per specifications in Annexure XX. Total 138400.00 Item- 30 Supply of material & installation of maintenance free earth electrode S No. Item No Description of Item Unit Qty Rate Amount

Supply of material & installation of Numbers maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XXI. Total 178192.00 Item- 31 Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm for S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XXII. Total 17280.00 Item- 32 Supply, fixing, testing and commissioning of Pre-cooling box 3 phase, S No. Item No Description of Item Unit Qty Rate Amount

Supply, commissioning of Pre-cooling box 3 phase, 440V, with thermoplastic polycarbonate box, having 1 No. MCCB of 100 Amp capacity and heavy duty D-contactor socket of 5 pin of 63 Amp, 415 Volts; Design to be approved before supply of material. Specifications in Annexur XXIII. Total 516984.00