REPAIR TO BRICK WORK, DRAINS, FENCING, RETAINING WALL, WALL PANELLING, FALSE CEILING, JOINERY, PLUMBING WORK, ROOFING, FLOORING, PATHWAYS, HARDSTANDING, SEWAGE LINE, SEPTIC TANKS, PERIODICAL SERVICES AND OTHER MISC WORKS IN RR UNITS OF 9 SECTOR UNDER

Amount

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Non skid coloured ceramic tiles 7 - 8 mm thick area of each tile exceeding 0.18 Square metre but not exceeding 0.38 Square metre in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectagular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over screed bed 15 mm thick in cement mortar 1:4 complete all as specified.

Glazed ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:3 as backing coat rough finished surface complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 20mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layer complete.

100mm thick plain cement concrete 1:2:4 type B-1 (20mm graded crushed aggregate) as in hardstanding/ path, finishing surface even & fair, complete all as specified and directed

75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed.

Machine pressed precast concrete interlocking paver block any shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning, complete all as specified.

25 mm thick plain cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in sub base,complete all as specified and as directed.

Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified.

Green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, size of each slab not be less than 0.28 Square metre, including rubbing and mirror polishing complete over and including 20mm thick screed bed in CM 1:4, complete all as specified.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Walling of random rubble stone masonry brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. Note:- PCC bond stones shall be used in lieu of stone bond stones. These shall be measured and paid separately. Rate for PCC bond stones has been in terms of preamble 6.2.7 as given on page 81 of SSR-2020 (Pt-II) and no separate deduction of volume occupied by PCC bond stones shall be made from stone masonry

Description all as per item No. 17.00 above, but except stone complete all as specified and directed

Providing precast cement concrete 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) as in anchorage blocks, bonders (for stone walling) including chamfers, weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match complete all as specified.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm to face stones (Granite or Trap stone) and dressing of face beds and joints, of random rubble walling, uncoursed or brought upto courses complete all as specified

Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, built in cement mortar, complete all as specified and directed.

Raised pointing to random rubble masonary, or polygonal rubble, uncoarsed or brought upto courses in cement mortar 1:4, complete all as specified and directed.

Plain cement Concrete 1:2:4 type-B-1 (using 20mm graded crushed stone aggregate) as in copings, and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified.

PVC (SWR) pipes 110mm bore any length single socketed with rubber ring joint laid in weep holes, fixed, complete all as specified and directed.

Broken stone or boulders in hand packing (any thickness) at back of walls etc. and raising (or lowering) to the required level, complete all as specified.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surface channels and drains, complete all as specified.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground Concrete, brick work masonry etc complete all as specified

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engr –in Charge

Mild steel work as in hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screqing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 all as specified.

Fixing only mild steel work as in hand rails, half round or other stock section or core for wooden hand -rail, straight portion drilled and countrsunk for ballusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screqing etc. wind ties for roof including securing bolts, posts and struts in fencing including cuttings, tops to shapes, as directed, drilling, holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work all as specified.

Dismantling fencing wire mesh, any type complete all as specified

Supply only chain link fencing of 3.15mm dia galvanised steel wire, conforming to IS : 2721 -2003 including line wires, straining bolts, binding wire etc., complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire, complete all as specified and directed.

Demolition of cement concrete (reinforced) (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for and disposal of unserviceable material, debris and rubbish to a distance not exc. 100m, complete all as specified and as directed.

Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified

Taking down cement plaster or cement lime plaster on stone or brick walls etc including racking out joints, hacking for key scrubbing down with water etc.complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M&L 15mm thick rendering in CM 1:6 on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified.

0.63mm thick galvanised corrugated mild steel sheeting with grade of Zinc coating of 275 gms/Square metre with two corrugation side lap and at least 150 mm end lap , fixed with L or J type or cranked hook bolts, in roof, walls etc, complete, all as specified.

Description all as per item No. 42.00 above, but except sheet complete all as specified and directed

0.80mm thick plain galvanised mild steel sheeting with 275 gm/Square metre Zinc coating as in ridge, hips, valley gutters, drip and straight flashing fixed with fixed with L or J type or cranked hook bolts, complete, all as specified.

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Framed work such as grills, grating etc with ends of bars shouldered and or riveted, or forged into spikes, framed guard bars, barrel, iron doors, ladders, balusters, walkway, frame work of water tanks and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of timber scantling under 40sqcm and over in section unframed work,as in fillets, rails, posts, rafters, purlins etc , complete all as specified.

Second class hard wood as in scantling, clean sawn fixed in position with nails, framed work, complete, all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified & directed

S/F 4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed.

12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Plain fillets, rectangular or triangular in section bullnosed, splayed, chamfered or rounded on one edge or face, secured with nails or brads sectional area exc 13Sqcm & nexc 25Sqcm, second class soft wood (Kail) complete all as specified .

S&F PVC wall panelling made up of PVC hollow panels 25/30cm in width and 10mm thickness interlocking pattern of approved shade and design fixed to wall or ceiling, fixed in repair, all as specifed and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Square metre each including taking out hold fast complete all as specified and directed.

Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each, complete all as specified and directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Factory made Glazed and skelton shutters 35mm thick of 2nd class hard wood rail & style open rebated and prepared to receive glass or wire gauze etc. shutters (without shash bars), size of members of shutters as specified in SSR Part-1, secton 8, clause 8.24 (a) kiln seasoned and pressure treated all as specified.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixed complete alll as specified and shown in relevant drg

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed by Engineer-in-Charge.

Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 200mm ISI marked and fixed, complete all as specified and directed.

Supply and fxing Mild steel sliding door bolts, stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate, 300mm long, all as specified.

Mild steel barrel tower bolt, stove enamelled black, with bright bolt of 200mm long, fixed complete all as specified.

Mild steel pressed handles, oval type, stove enamelled black, 150mm size, complete all as specified.

Mild steel butt hinges, medium weight, cold rolled (ISI marked),100mm long, complete all as specified.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21,100mm long, complete all as specified.

Taking down shutters of any description exceeding 1Square metre and not exceeding 2Square metre each and refixing in the same opening, complete all as specified and directed.

Door closure hydraulically regulated designation No. 3 universal type of aluminium (die cast) body, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kilogam and fixed in repairs, complete all as specified and as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and fixed in repairs, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete, all as specified and directed.

3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete, all as specified and directed.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified.

Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples fixed in repair, complete all as specified.

Supply and fxing in repair decorative curtain rod 25 mm dia MS pipe,covered with coloured PVC layer, with and including decorative ends complete all as specified.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 15mm dia GI steel water tubing ,medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store complete all as specified and directed.

Fixing only 20mm dia GI steel water tubing ,medium grade, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.

Dismantling water tanks and removing to store capacity exceeding 250 and not exceeding 500 ltr. , complete all as specified and directed.

Supply and fxing rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 500 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts complete all as specified and directed.

Bib taps long body 15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs complete all as specified and directed.

Stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs complete all as specified and directed.complete all as specified.

Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs all as specified & directed

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.

PVC connection 15mm size with length 600mm fixed in repair, complete all as specified and directed.

Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 300gms), fixed in repair complete all as specified and directed.

Vitreous china white soap dish size 160x160x90mm fixed to plugs with chromium plated brass screws fixed in repairs complete all as specified and directed.

Grating doom 100mm dia of PTMT (minimum weight 25gms), fixed in repairs, suitable for floor traps, all as specified and directed.

Tubular towel rail 60mm long 20mm dia D type aluminium anodised incl necessary brackets, fixed in repairs, complete all as specified and directed.

Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling including cutting for and pinning in ends of brackets or erecting stand etc., fixed in repair complete all as specified and directed.

Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, CI 'P' trap 100mm dia, connection to trap and fushing pipe, anti syphonage fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, complete incl flushing pipe, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete fixed in repairs complete all as specified and directed.

Vitreous china urinals, bowl type of size 430 x 370 x 340mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe fixed in repair, complete all as specified.

Supply and fxing in repairs, PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repairs complete all as specified and directed.

Stainless steel sink 1mm thick for kitchen or laboratory wih plugs, washers and wastes including fixing bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm fixed in repairs, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in trenches/ floors, fixed in repair, complete all as specified and directed.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in trenches/ floors/ fixed to wall, fixed in repair, complete all as specified and directed.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified.

PVC (SWR) bends any radius 110mm bore, complete all as specified.

PVC (SWR) bends any radius 75mm bore complete all as specified.

Preparation of newly plastered surface of wall including cornices pilaster etc, and applying two coats of cement base paint over a coat of alkali resistant primer, complete as specified and directed.

Preparation of new plaster surface of wall including cornices pilaster etc, and applying two coats of distemper oil emulsion over and including priming surface, complete as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats cement base paint of approved brand all as specified and as directed .

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats cement base paint of approved brand all as specified and as directed .

Preparation of old plastered or unplastered wall surfaces including washing, scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified

Preparation of old plastered or unplastered wall surfaces including washing, scrubbing down and stopping of distermperd surfaces and applying two coat of oil bound distemper, complete all as specified

One coat of synthetic enamel paint including preparation on old painted steel surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

One coat of synthetic enamel paint including preparation on old painted wooden or wood base surface of any description, not otherwise described over 10cm width or girth, complete, all as specified and directed

Two coat of synthetic enamel paint over a coat of pink primer on new wooden surface of any description, not otherwise described over 10 cm width or girth, incliding preparation of surfaces complete, all as specified.

Preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified.

Preparation of old painted steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint in camouflage pattern, complete all as specified.

Cleaning and removing all scale and dirt, etc, from tank of capacity 250 - 500 ltr and from mouths of circulating pipes, etc. and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed by Engr –in Charge

Cleaning and removing all scale and dirt, etc, from tank of capacity 500 - 1000 ltr and from mouths of circulating pipes, etc. and writing the item “ Tank cleaning on ---- including the date, month and year of the cleaning on External wall of tanks with synthetic enamel paint all as specified and directed by Engr –in Charge

20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight - 210 gms), fixed in repair, complete all as specified and directed.

Desludging / dewatering / pumping/ bailing out of contaminated water including cleaning of sludge, scum, silt (both organic and inorganic nature) and night soil from septic tank/soakage wells alongwith inlet / outlet chambers, manholes, soakage pits etc. of any capacity after plugging the incoming sewage lines by suction (vaccum) type machine mounted on LCV facility of high pressure vaccum including removing the contaminated water in same tank to a place outside cantonment to a distance exceeding 50 mtr but not exceeding 100 mtr and burying in pits including rough excavation of pits and carriage of sludge to pits including spreading well in pits after burying of sludge, covering the pits with 25cm thick layer of earth and spreading bleaching powder over the covered area, complete all as specified & directed.

Cleaning / clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth, removing any type of blockage including desilting, descaling & de-chocking of drains as well as manholes with combined high pressure rodding and flushing after clearing of manholes, including removing the sludge in the tank to a place outside cantonment at the place meant for the purpose by local municipality, all as directed by Engineer-in-Charge. Note : The contractor shall keep the sewage line functional throughout the contract period. The unit rate quoted by the contractor shall be deemed to be inclusive this aspect.

M S BANSI LAL CONSTRUCTION CO

AKSHAY CONSTRUCTION COMPANY

M/S Girdhari Lal Parihar

M/s Pall Constructions

JK BUILDERS AND DEVELOPERS

M/S RANADHAWA

BALVINDER SINGH AND SONS

Bidder Name

AKSHAY CONSTRUCTION COMPANY

M S BANSI LAL CONSTRUCTION CO

BALVINDER SINGH AND SONS

M/S RANADHAWA

JK BUILDERS AND DEVELOPERS

M/s Pall Constructions

M/S KOTWAL CONSTRUCTIONS

M/S Girdhari Lal Parihar