Nashik Ambad Industrial Area...WSS

Amount

Sub Estimate No. 1 :- M & R to Ambad Water Supply scheme…. Repairs & maintenance with removing of leakages on PWRM & day to day maintenance of Distribution lines in Ambad Indl Area & Replacement of 80mm dia AC pipe with 100mm dia DI K-7 pipe.

Hiring of welding set with Generator set alongwith the operator including fuel etc. complete at the location of leakages/breakdown as and when required, item includes all machinery, labour, duties etc. complete. The Rate Excluding GST.

Hiring of concrete breaker with compressor alongwith the operator including fuel etc. complete at the location of leakages/breakdown as and when required, item includes all machinery, labour, duties etc. complete. The Rate Excluding GST.

Hiring of Crane/ Hydra along with the operator and cleaner including furl etc. complete at the location of leakages/breakdown as and when required, item includes all machinery, labour, duties etc. complete

Hiring of JCB machinery alongwith the operator and cleaner including fuel etc complete at the location of leakages/breakdown as and when required, item includes machinery use for excavation in all strata during maintenance work of water supply pipeline including all machinery, labour, duties etc. complete. The rate excluding GST.

Hiring charges of truck / tractor for carting of 600 mm dia M.S pipe from MIDC store at Sinnar to work site including loading & unloading charges etc complete for 20 Km to 50 Km

Hiring of Dewatering set / Pump alongwith operator including fuel etc. complete at the location of leakages/breakdown as and when required, item includes all machinery, labour, duties excluding GST etc. complete.

Repairs of pure water rising main repairing of Raw water rising main for rectification of leakages during shutdown & breakdown including all labour, welding rod & material etc. The rate excluding GST

Repairs & day to day maintenance of distribution network 34 KM and 8.0 KM PWRM of Ambad indl area with all require excavation ,replacement of pipe & special, operation of sluice valve in indl area , including watch & ward of MIDC's property such as rising main ,distribution pipe line @ Ambad including all duties assinged as & when required etc. as a job.

Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. (Cement 5.90 bags / cum) b) In PCC M-150

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves - PN -1.0 (With by pass arrangement)iv) 100 mm diameter

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.Sluice valves - PN -1.0 (With by pass arrangement)vi) 150 mm diameter

Dismantling dead pipeline of M.S./ R.C.C./C.I./ P.S.C. and G.I./ A.C./ P.V.C./ S.W./H.D.P.E. pipe including cost of necessary excavation and refilling of trenches, breaking the joints, lifting the pipes and stacking to the place as directed by Engineer-in-charge with all leads and lifts including cleaning the surface, etc. complete. A ForM.S./R.C.C./C.I./P. A) For M.S./R.C.C./C.I./P.S.C. i) 80mm dia

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding ba

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction,etc.complete.(Bd-A-10/263)

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Providing D.I. pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the IS specification inclusive of cost of jointing materials (Rubber gasket of EPDM Quality) I) 100mm dia pipeline

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.(Rate for all class of valves.)ii) 100mm dia with rubber rings

Supply of C. I. Mechanical Joint Double Socket 90 degree (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes. ii)100mm dia

Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I.pipes.iii) 100x100x100mm dia

Providing and making GI pipe consumer service connection on GI Distribution main by drilling hole with suitable means , including all labour ,GI Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm/20mm/25mm respective Dia. Heavy duty Brass/ Polyprophylyne (Twin Jacketed ) Ferrule, Male and Female thread adapter Elbow, Bends, couplers ,Tees, Clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, GI casing pipe of minimum 32mm/40mm/50mm respective dia of required length for Roadcrossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fitting, refilling , Closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by Engineer??in??charge.???? 1)??With??Road??crossing??,for 15 mm Service connection

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol??and??GoM??in??all??respect??etc.??completeX) Blank Flange -PN-1.ii) 100mm dia

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc. 1) 80 to 300 mm dia

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber??gasket??of??S.B.R,??C.I.??Follower??Glands??and??M.S.??Nut??Bolts.The?? whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM??in??all??respect,??etc.??complete??as??directed.ii) 100mm dia

Sub Estimate No. 2 :- M & R to Ambad Water Supply scheme -- Repairs to roads in Ambad industrial area.

Picking the road surface including sectioning etc. complete (WBM surface.)

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Providing and constructing 75 mm. thick Modified Penetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone metal layers 100% crusher broken metal with conical crusher plant heating and spraying the bitumen of specified grade @ 2 Kg/sqm, spreading 12 mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. (VG-30 bulk bitumen rates are considered to arrive at rates

Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 kg/sqm using mechanical means.

DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 mm compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG-30 bulk bitumen rates are considered to arrive at rates)a) 50 mm thick with heating aggregate

Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen with sprayer on Dry / Hungry B.T. surface 3 kg/10 sqm. (VG-30 bulk bitumen rates are considered to arrive at rates) .

BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1, premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with VTS, laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 50mm compacted thickness with drum mix plant with SCADA, Sensor paver and Vibratory roller excluding prime/Tack coat etc. complete Bitumen of specified grade with stone dust filler. (VG-30 bulk bitumen rates are considered to arrive at ratesa) 25 mm thick with heating aggregate

Sub Estimate No. 3 :- M & R to Ambad Water Supply scheme -- Providing, laying & Jointing 100mm dia DI K-7 pipeline at Plot No M-116 in Ambad Industrial Area.

Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding ba

Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete

Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by Engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (Bd-A-6/259)

Filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (Bd-A-10/263) From Contractors

Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.

Providing D.I. pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the IS specification inclusive of cost of jointing materials (Rubber gasket of EPDM Quality)

Lowering, laying and jointing in position following C.I.D/F Reflex valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete.(Rate for all class of valves.)ii) 100mm dia with rubber rings C.I. L.A. Class / mortar inlined DI K-9/K-7

Supply of C. I. Mechanical Joint Double Socket 90 degree (11/4’’) Bends as dimensionally described in Table-14 of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally described in IS-12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I. pipes.ii)100mm dia

Supply of CI Mechanical joint All Socket Tees as dimensionally described in Table -18 of IS - 13382/1992 complete with sealing rubber gasket of S.B.R. (dimensionally described in IS- 12820/1989) with cast iron follower gland and mild steel nut bolts coated or otherwise protected from rusting and suitable for C. I.pipes.viii) 150x150x100mm dia

Providing double flange sluice valve confirming for IS- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding GST levied by GOI & GOM in all respect etc. complete.a) Sluice valves-PN-1(Without by pass) iv) 100mm dia

Supply of C. I. Mechanical Compression Flanged / Socket Tailpiece (Popularly known as I TM Flanged / Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I. Spun Pipes ( as per - IS - 1536 /2001) and D. I. Pipes ( as per IS: 8329 / 2000).The Tailpiec to be supplied complete with sealing rubber??gasket??of??S.B.R,??C.I.??Follower??Glands??and??M.S.??Nut??Bolts.The?? whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS:1538 /1993. The rates are inclusive of cost of material, freight charges, loading, transportation and unloading at departemental store, excluding GST levied by Gol and GoM??in??all??respect,??etc.??complete??as??directed.ii) 100mm dia

Providing and supplying ISI standard D. I. specials & fitting with sealing rubber gasket of S.B.R, complete with cast iron follower gland and M. S. nut bolts coated or otherwise protected from rusting and suitable for D.I.pipes including cost of labour ,materials, and transportation to stores / site, loading and unloading excluding GST levied by GOI & GOM in all respect, complete as per IS-9523. For all types of specials, bends tees etc.1) 80 to 300 mm dia

D.I. Socket and flanged fittings :-Providing and supplying D.I. fitting with ISI mark socket pushon joints or flanged joints confirming to table 12 to 31 of IS 9523/2000 upto latest amendments including cost of SBR/ EDPM tyton rings. Fittings should be with internally ordinary portland cement mortor lined and externally metallic zinc coating/zinc rich paint with finishing layer of black bitumen coating including transportation & excluding all statutary duties and taxes such as GST levied by Gol??and??GoM??in??all??respect??etc.??completeii)VIII) Flange Socket-PN-10 100 mm dia

Royalty Charges

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

K G Dube & Sons (BID ID -6613775)