Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L1 | Accepted-AOC Reasonable lowest tenderer | |
| 2 | L2₹20.9 L+₹25,393.67 (1.23%)Rejected-Finance | L2 | Rejected-Finance Not Lowest tenderer | |
| 3 | L3₹21.9 L+₹1.3 L (6.17%)Rejected-Finance | L3 | Rejected-Finance Not Lowest tenderer | |
| 4 | L4₹22.1 L+₹1.5 L (7.14%)Rejected-Finance | L4 | Rejected-Finance Not Lowest tenderer | |
| 5 | L5₹22.4 L+₹1.8 L (8.70%)Rejected-Finance | L5 | Rejected-Finance Not Lowest tenderer |
Tender Value
₹21.1 L
EMD Value
₹42,200
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (East) Ferozepur cantt
GE (East) Ferozepur cantt
PROVN OF 01 X ELEVATED SENTRY POST WITH STORAGE FACILITY IN GROUND FLOOR AND 01 X NIGHT PICKET IN ADVANCE LANDING GROUND (ALG) UNDER AGE B/R-II OF GE (EAST ) FEROZEPUR CANTT
2023_MES_575698_1
8054/GE/E/FZR/22-23
Open Tender
Civil Works
Item Rate
180 days
GE (East) Ferozepur cantt
Please refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE(East) Ferozepur cantt
₹42,200
Yes
6 Apr 2023
18 Jan 2023
15 Feb 2023
18 Jan 2023
13 Feb 2023
1 Feb 2023
Amount
B/R Works Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, for lying cables etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft loose soil complete all as specified and as directed.
All as per tem item No 2 above but depth exceeding 1.5m and not exceeding 3.00m
M&L for PCC type D2, 1:4:8 (40 mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and as directed.
Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as specified and as directed.
Removing excavated material / soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as specified and as directed.
Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surface of concrete complete all as specified and as directed.
M&L for RCC (1: 1.5 :3) type B1, (20 mm graded aggregate) as in Foundations, footings, foundation beams, plinth beams; bases for columns, etc.. complete all as specified and as directed.
Use and waste of Formwork to sides of pillars, posts, struts, piers, columns etc rough finished surface of concrete all as complete all as specified and as directed.
M&L for RCC, (1: 1.5 :3 )type B1(20 mm graded aggregate) as in column etc. complete all as specified and as directed.
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports,overhangs, etc. also splays between floors and beams, etc. rough finished surface of concrete complete all as specified and as directed.
M&L for RCC, (1: 1.5 :3) type B1 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as specified and as directed.
Use and waste of form work to chajjas, including edges, rough finished surface of concrete complete all as specified and as directed.
M&L for RCC, (1: 1.5 :3 ) type B1 (20 mm graded aggregate) as in chajjas etc. complete all as specified and as directed.
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete complete all as specified and as directed.
Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surface of concrete complete all as specified and as directed.
M&L for RCC , (1:1.5 :3) type B1 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as specified and as directed.
Use and waste of Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) rough finished surface of concrete complete all as specified and as directed.
M&L for RCC , (1:1.5 :3) type B1 (20 mm graded aggregate) as in Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified and as directed.
M & L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified and as directed.
M&L 10 mm thick screed bed or bedding layer in CM(1:4) using water proofing compound @3% by weight of cement or as per manufacturer instructions which ever is more and finished surface even and smooth smooth for laying of water proofing membrane complete all as specified and as directed. Note: WPC shall be measured and paid separately)
M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm laid after Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on verticle surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane as per manufacturers instruction complete all as specified and as directed.
M&L for prepration of roof surface and applying two coat of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and as directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed.
S & F mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required including cranking, bending spirally or hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc. complete all as specified and as directed.
All as per item No 25 above but 5mm dia and over upto and incl 10mm dia in stirupps,spacers and binders etc complete all as specified and as directed.
M&L for plastering 15mm thick in cm 1:4 on fair faces of brick or concrete,using water proofing compound @3% by weight of cement or as per manufacturer instructions which ever is more surfaces finished even and fair complete all as specified and as directed. Note: WPC shall be measured and paid separately)
M&L for plastering 10mm thick in cm 1:6 on fair faces of brick or concrete,surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for plastering 5mm thick in CM(1:3) to ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound conforming IS 2645-1975 of approved make complete all as specified and as directed.
M&l Preparation of new plastered surfaces wall and applying two coats of oil bound distember over a coat of primer complete all as specified.
M&L Preparation of newly plastered surfaces of walls etc, and applying three coats of white wash complete all as specified and as directed.
M&L Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.
M & L Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over coat of red lead primer complete all as specified and as directed.
M&L Preparation of steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
M & L Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
S&F Pressed steel frames made of 1.25 mm thick MS sheet of profile 105 mm X 60 mm for door and window frames with one or more rebates including lock strike plate, shock absorber, 20 mm dia 60 mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and as directed.
All as per item No 37 hereinbefore but size of profile 125 mm X 60 mm, complete all as specified and as directed.
S&F 35mm thick, 2nd class hard wood plain framed, panelled shutters, any number of panels, with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers and all as specified and dirtected.
S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat complete all as specified and as directed.
S&F Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded & including 6 mm mild steel guard bars and with one shop coat of zinc chrome primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F Factory made box type side hung steel window with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chrome primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.
S&F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004)complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and as directed.
S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified and as directed.
S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified and as directed.
S&F PTMT handle 125mm long fixed with steel screws complete all as specified and as directed.
S&F Extruded Aluminium alloy tower bolt of 200mm length of bolt and fixed with screws, complete all as specified and as directed.
S&F 150mm size, extruded aluminium alloy handles, fabricated type, anodized and fixed with screws complete all as specified and as directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F Galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
S&F Galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
S&F 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified and as directed.
S&F 20mm bore brass ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.
S&F PVC Connection pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end)etc suitable for 15mm bore of pipe complete all as specified and as directed.
S&F Soap dish of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified and as directed.
S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests any pattern ( excluding flushing cistern & flush pipe) including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, complete all as specified and as directed.
S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc complete all as specified and as directed.
S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, PVC waste pipe, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing complete all as specified and directed.
S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws complete all as specified and as directed.
S&F 110mm bore PVC (SWR) pipe in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110mm bore, PVC (SWR) bends any radius complete all as specified and as directed.
S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
S&F 75mm bore, PVC (SWR) bends any radius complete all as specified and as directed.
S&F cast iron floor Trap 100mm dia with gratting including jointing with solvent cement complete all as specified and as directed.
S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S&F bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromimium plated complete all as specified and as directed.
S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and as directed.
S&F 15mm stop valve/Angle Cock cast copper alloy with crutch or butterflty handle, screwed down for iron pipe or brass ferrule fancy type chromium plated with long shank and cup complete all as specified and as directed.
S&F Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms) complete all as specified and as directed.
S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.
M&L for fine sand bed under paver block, complete all as directed by Engr-in-charge.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed. Note :- Sand will be measured and paid seperately
M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as specified and as directed.
M&L for Hard core100 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as specified and as directed.
M&L for PCC 100 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base including necessary form work complete all as specified and as directed.
M&L 50 mm thick PCC, type B-1, 1:2:4 (20mm graded aggregate) as in flooring , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.
M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over and including backing coat with 10 mm thick in CM 1:4 complete all as specified and as directed.
M&L for Glazed ceramic tiles, coloured (light shade with dark shade boder as approved), of size 300X200/300x450 of 7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry and pointed in white cement with pigment to match the colour of tiles, laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.
M&L for Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats including necessary form work complete all as specified and as directed.
S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
M &L 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified and as directed.
M&L 50mm thick PCC(1:2:4) type B1 (20mm graded stone aggregate as in plinth protection laid in alternative panels finished even and smooth without using extra cement complete all as specified and as directed.
Excavating in post holes (or similer holes) in soft/ loose soil each n exc 0.5 cum getting out,returning filling in and raming earth or broken rubble mixed with earth around,in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and as directed.
M&L for cement concrete type C-2 1:3:6 using 40mm graded stone aggergate as in foundations filling and mass concrete complete all as specified and as directed.
S&F Mild steel work as in posts or struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary bolting or riveting etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.
S&F Tie bars with screwed ends, nuts, washers and mild steel paltes for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10 cm long diameter of the neck 5 to 10 mm complete all as specified and as directed.
S&F Mild steel Round bars 10mm dia and over,cut to length, bent to shape required, complete all as specified and as directed.
S&F GI chain link fancing 100 mm diagonal mesh size of 3 mm dia wire fixed angle iron fencing post including provn of binding wire complete all as specified and as directed.
M & L 150 mm dia Salt Glazed stone ware drain pipes laid in trenches and jointed complete all as specified and as directed.
M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.
M& L for cement concrete(1;2:4) type B1 using 20mm graded stone aggregateset in Cement mortar (1;6) as in copings complete all as specified and as directed.
M&L providing for cement concrete Type B1(1:2:4), using 20mm graded aggregate in benching inside manholes bottom portion ounded or chamfered angles and throating complete all as specified and as directed.
M&L Reinforced Precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:6 complete all as specified and as directed. Note: Reinforcement will be measured and paid seperately.
M&L for cutting into existing manhole for connecting new drains of internal dia 150mm , making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete(1:2;4), smooth finished and reforming nching as required complete all as specified and as directed.
M&L for 10 users Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of concrete 1:2:4 including intercepting chamber and screen chamber made of brick masonary in CM , RCC over slab in cement concrte 1:2:4/ SFRC cover, interconnecting pipes of RCC/DWC Complete filled with brick bats of size 1.2m x 1.5m effective depth. complete all as specified and shown on drg.
M&L for on site RCC hume pipe septic tank designated to carry sewage and sullage water excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as specified and as directed.
E/M Works M&L for point wiring with 1.5 Sqmm (nominal area), PVC insulated,FRLS multistranded, single core unsheathed, copper conductor cables drawn through and including PVC conduit with all accessories concealled in wall and fixed to ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed,multi stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth dolly including sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switch all as specified and directed. (a) One light point / fan point/ Exhaust point controlled by one single pole one way switch. ( wiring shall be done in colour coding)
All as per item No 104 hereinbefore but One 3 pin socket outlet 5 amps independent board complete all as specified and as directed.
All as per item No 104 hereinbefore but One 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and as directed.
All as per item No.104 here-in-before but one 15 Amps socket outlet point controlled by one single pole switch one way and wiring with 2.5 Sqmm PVC insulated,stranded,unsheated copper conductor on independednt board with continuous earth wire of size 2.5 Sqmm green colours PVC insulated, unsheathed,stranded copper conductor cable.
S&F Switch piano flush type 6 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
S&F Switch piano flush type 20 amps, single pole one way, white in colour, duly ISI marked complete all as specified and directed.
S&F Socket outlet 2 in 1, 5 pin, 6 Amps, white in colour, duly ISI marked complete all as specified and directed.
S&F Socket outlet, UNI, 2 in one 10 Amps & 20 Amps, white in colour, duly ISI marked complete all as specified and directed.
S&F Ceiling rose surface type, 240 volts, 50 Hz, 6A, Pilot 3 plate, white in colour, bakelite 65 x 50mm, 3 terminals duly ISI marked complete all as specified and directed.
S&F rotary Stepped type electronic fan regulator for ceiling fan 1200/1400mm size, 240 volts, 6 Amps, 100W, white in colour, duly ISI marked complete all as specified.
S&F Lamp angle holder (Plastic Ring), 240 volts, 50 Hz, 6A, white in colour, duly ISI marked complete all as specified and directed.
S&F LED bulb of 9 watt, B22, 6500K all as specified and directed.
S&F 20W, 6500 K, 4 feet LED Square tube light fitting, energy efficient fixed to wall/ ceiling etc complete all as specified and as directed.
S&F Bldg Security light fittings LED 25 watts, including GI bracket bend to shape made out of GI pipe light grade of 25 mm, size up to 1.2 mtr long etc complete with MS clamps made of 25x3mm MS plate, duly painted with two coats of aluminium paint with nuts/ bolts/ washers and all fixing arrangements to wall/ pole, including connecting up with 2 core copper flexible wire of size 23/00.0076 complete all as specified and as directed.
S&F exhaust fan heavy duty with louvers complete of sweep size 300mm, 900 RPM, single phase, with bolts, nuts and washers, size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/00.0076 three core from ceiling rose to exhaust fan max 1.5 mtr for giving connection complete all as specified and as directed.
S&F ceiling fan 1200mm sweep, AC single phase 230 Volts 50Hz, at Bldgs upto 5 mtrs height, including provision of flexible cable 3 core copper conductor of size 23/0.0076 of suitable length from ceiling rose to ceiling fan upto 1.5 mtr for giving connection and all hanging arrangement i.e. standard down rod, hanging clamp, with rubber real nuts bolts, spring washers and locking of splite pin, plastic canopy with screw compete without fan regulator and marking of MES nos with black synthetic enameled paint all as specified and as directed.
S&F Sheet metal enclosures with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB of 240V, 20 amps complete all as specified and as directed.
Supply and fix Desert cooler electric driven single phase having nominal air flow cap of 4000 cum/hr, with working voltage240 v 50 hz, made of 20 guage sheet of ISI marked, size not less than 90x70x70 cm surface area from top and bottom, 68x54 cm from front grill size including Tullu pump with 4 nos piano type 5 Amp switch on front side including one coat primer and two coats of synthetic enamel paint, inner tank coated with rust proof paint (steel body) with minimum volume of inner water tank is 80 Ltrs complete and thickness of tank should not not less than 20 guage, fitted with coppper winding electric motor of Compton / Khaitan/ Bajaj complete all as specified and directed. Note: Test certificate of electric motor from manufacturer is mandatory required and submitted by contractor to concerned Engr-in-charge.
S&F Factory made sheet metal enclosures double door type made out of CRCA 1.2 mm thick M.S sheet,powder coated, SPN DB with 200 Amps rated bus bar, 8 way, IP-42 protection surface mounting, 240 volts, dust and vermin proof, suitable for incorporation of MCBs duly cocealled in wall, factory made, including making good distrubbed surfaces with matching colour complete all as specified and as directed.
S&F MCB SPN, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and as directed.
S&F MCB SP, 6A-32 Amps, 240 volts, "B" series, 10KA duly ISI marked, complete all as specified and as directed.
M&L for Sub main wiring with two single core 2x4 sqmm PVC insulated and unsheathed stranded copper conductor alongwith earth wire 4.0 sqmm drawn in and including PVC rigid conduit connected to main board complete all as specified and directed (Note:- Two runs cable and one number earth wire and suitable PVC conduit shall measured together as unit length).
Supply and fix electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed.
S&F 15mm dia Bib taps, cast copper alloy, screwed down, screwed for 15mm iron pipe or brass ferrule, complete all as specified and as directed.
S&F 15 mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, complete all as specified and as directed.
M &L Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces. excavation in soft/ loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) complete all as specified and as directed.
M &L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanised iron or steel wire complete all as specified and as directed.
M&L for cutting of existing GI tubing 40mm dia for making new conncetion, inserting un equal Tee 40X40X25mm dia including excavation, returning filling complete and all as directed and specified.
Supply and laying GI tubing medium grade galvanised of size 25mm bore laid on floor/ ceiling including all fittings and short pieces complete all as specified and as directed.
Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 25mm bore complete all as specified and as directed.
Supplying, laying, jointing and testing XLPE insulated, armoured, electric cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area 35 sqmm 2 core confirming to IS:7098-1985 laid in trenches, in floor, in duct, through pipes or along the pole complete all as specified and as directed. (Note:- Excavation & earth work, cable preotection cover and sand cushion shall be measured & separately)
M&L Dry and clean fine sand for cable cushioning to underground cable protection, complete all as specified. Note- Punned down thickness shall be measured.
S&F Cover to underground cable with one layer of bricks using sub class ‘B’ bricks (old size) laid flat across the cable complete all as specified. (Excavation and earth work measured separately).
Manjeet Singh Contractor
M/s AH Construction Co.
M/s Sidhu Bros
M/s Shri Krishna Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .