PERIODICAL SERVICES INCLUDING PLASTERING AND CENTRAL AMENITIES AT NAGROTA MIL STN UNDER AGE BR I OF GE NAGROTA

Amount

SCHEDULE A PART-I Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified and directed.

M&L Brick work with subclass 'B' bricks,well burnt straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and smooth with out extra cement with WPC complete all as specified and as directed by the Engineer-in-Charge Note:- (i) water proofing compound on only top layer of plaster (ie 5mm thick) (ii) Qty of WPC 200ml per cement bag as per manufacturer instructions (iii) WPC shall be measured and paid separately)

M&L for rendering 5mm thick 1:3 on concrete cieling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of wall care putty complete all as specified and directed. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M & L for complete removal of old plastered surfaces and applying two coats of Anti fungal weather coat with acrylic smooth exterior emulsion paint with silicone additives of required shade applied 1.67kg/10sqm of required shade over a coat of primer applied 2.20kg/10Sqm on new/ old surfaces including 2-3mm thick wall care putty , including necessary scaffolding for max height of G+2 bldg, etc complete all as specified and directed. Make of Acrylic emulsion weather coat paint :- Asian (Apex Ultima), Berger (Super coat ) or ICI Dulux (weather shield), Nerolac, etc Make of primer :- Asian or Equivalent. Note :(a) Preparation/ scrapping of surfaces will be carried out through machinery only. (b) Each stage i.e. application of primer, application of exterior emulsion first and second coat will be passed from Engr-in -Charge. All painting work will be carried out through machinery only. (c) A warranty of four years or as per manufacturer's instructions, whichever is higher and 2% of retention money as a guarantee against the work done will be furnished by the tenderer for all interior and exterior painting work. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls as specified and directed by Engr-in-Charge. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying one coat of Oil emulsion distemper on walls as specified and directed by Engr-in-Charge. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper over a coat of primer complete all as specified and directed. Note : The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.

M&L 3mm thick wall care putty on wall complete all as specified and as directed.

M&L 3mm thick wall care putty on ceiling complete all as specified and as directed.

M & L for Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying with applicator one coat of white wash on walls after filling any hole with putty complete all as specified and as directed.

All as per ser item No 16 above but applying with applicator one coat of white wash on ceiling complete all as specified and directed.

All as per srl item No 16 above but applying with applicator one coat of cement base paint on walls (upto three storeyed bldgs complete all as spd and directed).

All as per srl item No 16 above but applying with applicator two coat of cement base paint on walls (upto three storeyed bldgs complete all as spd and directed). .

M & L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and as directed.

M & L for Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc.complete all as specified and as directed.

M & L for Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed. Note : (a) The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties.. (b) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE

M & L for Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over one coat of red oxide primer complete all as specified and as directed. Note : (a) The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock key system for the storeroom having one key with the contractor and the other with the user, either PMG rep/user rep and store will be opened for taking out material for specific work in the presence of both the parties. (b) The bills produced by the contractor will be vetted from the manufacturer and fwd to GST section/ council for verification by GE

Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site up to 500 m complete all as specified and directed

M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid shall be alternate panels and joints filled with bitumen mastic filling mix with 1 part bitumen and 3 part of sand complete all as specified and directed.

S & F in repairs cast iron 75 mm floor trap / nahni trap , with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), dia of outlet 75mm bore complete all as specified and as directed..

S & F in repairs 100mm bore cast iron bends diminishing pieces or tapers including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed..

S & F in repairs 75mm bore cast iron bends diminishing pieces or tapers including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed..

S & F in repairs 100mm bore cast iron branch / junction pieces, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and as directed

S & F in repairs 75mm bore cast iron branch / junction pieces, single (equal or unequal ) ordinary or inverted ( spigot or socket type) or with parallel branches including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.. .

S & F in repairs 100mm bore cast iron pipe, waste and vent pipes in any length with or without ears including jointing with cement joints , laid in trenches or in floors or in walls, complete all as specified and directed..

S & F in repairs 75mm bore cast iron pipe, waste and vent pipes in any length with or without ears including jointing with cement joints , laid in trenches or in floors or in walls, complete all as specified and directed.

S&F for in repair 110mm bore SWR (PVC) pipes single socket in any length with rubber ring joints fixed to wall with stack clamp, etc complete all as specified and directed

S&F for in repair 75mm bore SWR (PVC) pipes single socket in any length with rubber ring joints fixed to wall with stack clamp, etc complete all as specified and directed

S&F for in repair PVC (SWR) bends any radius for 110mm bore pipe complete all as specified and directed.

S&F for in repair PVC (SWR) bends any radius for 75mm bore pipe complete all as specified and directed.

Taking up or down 15 mm bore old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .

All as per item no 37 above but 20mm bore complete all as specified and directed.

S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and directed.

All as per item no 39 above but 20mm bore complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene three layer white in colour water storage tank 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I and including dismantling water tank complete all as specified and as directed..

S & F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.) complete all as spd & directed.

S&F of stop valves fancy type chromium plated with long shanks fixed with 15 mm bore pipes complete all as specified and directed.

Disconnecting existing tanks capacity of tanks exe 250 ltr and n.exe 500 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe complete all as specified and directed.

Disconnecting existing tanks capacity of tanks exe 500 ltr and n.exe 1000 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe complete all as specified and directed.

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed.

S&F 3.00 mm thick sheet glass figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed.

S & F MS framed work as in frame work water tank or other section with gusset plate, etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating,and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

M & l for Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed.

M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with synthetic enamel paint 65mm long and 10mm wide in words and figures such as (PN-10,TN-27,T-123 & T-81/2 etc) over black synthetic enamel painted ground of 150mm dia incl obliterating old writting of any description n exc 0.10 sqm with paint to match existing work complete all as specified and as directed. Note- considering PN-10/TN-27/T-123/T-81/2 No as unit.

Mahajan Auto Traders (BID ID -3311155)

U K Engineering Works (BID ID -3312451)

M/S MANISHA BUILDERS (BID ID -3311551)

BADRI NATH AND SONS (BID ID -3311391)

ASHWANI KUMAR KHAJURIA AND SONS (BID ID -3312315)

Allied Technologies (BID ID -3312486)

BHARTI CONSTRUCTIONS (BID ID -3312217)