RENOVATION WORK OF ROHIN MAIN CANAL AND ITS DISTRIBUTARIES, MINOR INCLUDING ALL KACCHA AND PUCCA WORKS.

Amount

Earth work in excavation in foundation including digging and refilling the trenches with its proper disposat within 30 meter lead & all lift with cost of labour and T&P for proper completion of work as directed by Engineer in charge as per drawing and I.D. Specification.

Earth work in Back filling & Correction Section including all cost of materials, T&P and labours and other accessories required for proper completion of work

Laying C.C. 1:3:6 in foundation with cement, sonbhadra coarse sand of FM. Not less then 2.00 and dala grit (20 mm to 40 mm.) including all cost of materials,T&P and labours and other accessories required for proper completion of work.

Laying C.C. work in 1:2:4 (M15) sonbhadra coarse sand of FM. Not less then 2.00 and dala grit (12.5 mm to 20 mm.) including all cost of materials,T&P and labours and other accessories required for proper completion of work. As per direction of direction of Engineer in Charge.

1st class brick work in 1:4 cement mortar with class brick M-150, sonbhadra coarse sand of FM. Not less then 2.50, including all cost of materials,T&P and labours and other accessories required for proper completion of work

Centering and shuttering for C.C. work including all cost of materials,T&P labours and other accessories required for proper completion of work.

Centering and shuttering for R.C.C. / R.B. work including all cost of materials,T&P labours and other accessories required for proper completion of work.

Earth work for making Ramp, Diversion and jeepable service road including cost of all materials, labour, T&P etc required for proper completion of work as directed by Engineer-in-Charge as per I.D. specification.

Dry brick on edge soling with 1st class brick including preparation of sub-grade to prescribed camber, filling joint with Local sand/earth including cost of material, labour and T&P etc for proper completion of work as directed by Engineer-in-Charge as per I.D. specification.

Dismantling of brick work in lime or cement mortar

Dismantling reinforced cement concrete

Dismantling of stone work and cement concrete in lime or cement mortar

Reinforced cement concrete in 1:1:2 in all RCC work with Coarse sand having F.M. Not less than 2.5, Crushed Stone Aggregate of nominal size 12.5 mm to 20 mm, Mechanically mixed and properly compacted by Vibrator including cost of all materials but excluding cost of steel, labour and T&P with all leads and lift/down for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Earth work in removing of diversion bund & correction/strengthing of bank including cost of labour and T&P with proper completion of work as directed by Engineer-in-Charge as per I.D. specification.

Laying PVC Pipe of 75 mm dia in abutment including cost of pipe, other material, labour, T&P etc. required for complete work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Boring with 150 mm diameter casing pipe including lowering and extraction of assembly, loading, unloading and carriage including cost of all materials, labour and T&P etc. complete work approved by Engineer-in-charge as per drawing and I.D.Technical specification.

Hiring/Running of 5 H.P. generator set pump for dewatering including arrangement of Pump suction and delivery pipes and other accessories at site including cost of all materials, labour and T&P etc. complete work approved by Engineer-in-charge as per drawing and I.D.Technical specification.

Supplying and fixing of Wheel Guard Stone including cost of all materials, labour and T&P etc. complete work approved by Engineer-in-charge as per I.D.Technical specification.

Struck deep Cement Pointing in 1:2 Cement Mortor including cost of all materials, labour and T&P etc. for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Providing and laying Steel in Reinforcement including cost of steel carriage, bending, cutting, placing in position and binding with steel binding wire etc. including cost of all materials, labour and T&P with all leads and lift for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

12 mm thick plaster with cement mortar inproportion of 1:4 cement and sand of 1.25 F.M. over brick work minium thickness not be less than 10 mm including supply of all materials,labour and T&P etc required for proper, comletion of work.

Supply and fixing PVC Pipe 160 mm dia (6") 6 kg presser I.S.I marke ,labour, t&p etc. required for proper completion of work.

Supply and fixing PVC Kulawa Pipe 110 mm dia (4") 6 kg presser I.S.I marke ,labour, t&p etc. required for proper completion of worK.

Painting/Printing letter upto 10cm height including cost of material, labour, T&P etc. complete as directed by Engineer-in-Charge

Making and fixing sign board (1.20MX0.90M) at work place of canal including matieral, fabrication, labour, t&p, transportation, painting and writing etc. complete.

Finishing wall paint two coat over one coat primer with acrylic smooth exterior paint including scraping and cleaning of old surface paint, dust, material, labour, T&P etc. Complete.

Supply and laying of Mirzapur Stone Boulder 25 to 60 kg. Lift upto 1.50M and lead of 60.00 M. including cost of all material, labour, T & P etc. complete for work. as per direction of Engineer-in-charge.

Supply and Laying of coarse sand (FM not less then 2) in form of fillter material including all cost of materials,T&P and labours and other accessories required for proper completion of work.

Supply and Laying of crushed grit (12.5mm-20mm) in form of fillter material including all cost of materials,T&P and labours and other accessories required for proper completion of work.

Supply and Laying of crushed grit (4.75mm-10mm) in form of fillter material including all cost of materials,T&P and labours and other accessories required for proper completion of work.

Reinforced cement concrete in 1:1.5:3 in all RCC work with Coarse sand having F.M. Not less than 2.5, Crushed Stone Aggregate of nominal size 12.5 mm to 20 mm, Mechanically mixed and properly compacted by Vibrator including cost of all materials but excluding cost of steel, labour and T&P with all leads and lift/down for proper completion of work as directed by Engineer-in-Charge as per drawing and I.D. specification.

Silt clearance/trench digging including lift upto 1.5m and lead upto 30m, including cost of driver/assistant driver, POL, maintencance of machine, contractor profit, taxes etc but excluding leveling,dressing & compaction. (b) By hydraulic excavator equivalent capacity 60 cum/hour.

Laying C.C. 1:4:8 with cement, sonbhadra coarse sand of FM. Not less then 2.00 and brick ballast (25mm. to 40mm.) including all cost of materials,T&P and labours and other accessories required for proper completion of work.