Balance work for the construction of Two Rooms Multi storied G 3 Residential Qtr at SMGS Hospital Jammu.

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30 cm in depth, 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50m, disposed earth to be levelled and neatly dressed. All kind of soil.

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material all kind of soil

Providing and laying cement concrete1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm Nominal size) in retaning wall/return wall columns, foundation etc. all work upto Plinth level including all carriage complete

Providing and laying in position cement concrete of specifed grade excluding, the cost of centring and shuttering all works upto plinth level. (incl. carriage complete) 1:3:6 (1 cement :3coarse sand : 6 graded stone aggregate 20 mm Nominal size) crushed

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size ) beams, suspended floors, landings balconies & staircases etc. having upto 15° slope excluding cost of centering, shuttering all work upto floor V level (incl. all carriges) complete

Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo - Mechanically treated bars of specified grade) (TMT)

Filling available excavated earth (excl. rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 m and lift upto 1.5 m.

Centring and shuttering including strutting, propping etc. and removal of form for.

Foundations, footings, bases of columns etc. for mass concrete.

Wall (any thickness ) including attached pilaster, buttresses plinth and strings courses etc.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Suspended floors, roofs,landings, balconies and access platform.

Edges of slabs and breaks in floors and walls. Under 20cm wide.

Brick work with common burntclay F.P.S (non-modular) bricks of class designated 75 in foundation and Plinth in cement mortar 1:6 (1 : cement 6: coarse sand) including extra for brick work in Super Structure above plinth level upto floor V level (By Manual means) (including all carriages) complete.

Brick work with common burnt clay F.P.S.(non-modualar)bricks of class designation 75 in foundation and plinth in Cement mortar 1 :4 ( 1 cement : 4 coarse sand)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement@ 0.488 kg/sqm mixed "Ywith with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound@ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes prepartation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement :4 fine sand) incl. (all carriages) complete.

Providing and laying damp proof course 50 mm thick with cement concrete. 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm Nominal size crushed) incl. (all carriages) complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like RAK, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of RAK, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing 35mm thick wire gauze shutters using galvanised MS wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clerestory windows with hinges and necessary secrews Second class deodar wood Including Beading

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/wooden frames with rawl plugs screws etc.

Providing and fixing 8 mm thick glass fixed portion of window frames using deodar beading of size 40x12 mm (Saint Gobin/Modi Guard)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm

Providing & applying white cement based putty of average thickness 2mm of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (Birla/JK)

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. (Asian/Narolac)

Finishing wall with Acrylic smooth exterior paint of required shade on new work ( two or more Coats applied @ of 1.67 Litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg /10 Sqm). complete. (Asian/Narolac)

Making plinth protection 50mm thick of cement conc. 1:3:6 (1cement : 3 coarse sand : 6 graded stone agg.) 20mm nominal size over 75mm bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand incl. finishing the top smooth. (crushed) (incl. all carriges) complete.

Providing and fixing Salem Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and king good the walls wherever required. 610x460mm bowl depth 200mm

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade new steel work two or more coats. Using ASIAN or NEROLAC paint only

Providing and fixing white vitreous china pedestal type water closet of make Cera, Hindware or as approved by Engineer-in-charge. (European type W.C pan) with seat and lid 10 ltr low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to I.S: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever requried W.C Pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I/M.S rackets, 32 mm C.P brass waste of standard attern of make Cera, Hindware including painting of fitting and brackets cutting and making good the walls wherever requried. white vitreous china wash baisn Size 550x 400 mm

Providing and Fixing Polyethelene-Aluminium-Polyrethelene (PE-AL-PE) composite pressure pipes conforming to IS: 15450 U.V stablised with carbon black having thermal stablity for hot and cold water supply capable to with stand temperature upto 80°C including all special fitting of composite material (Engingring plastic plend and brass inserts wherever required) e.g. Elbos, Tees, reducers, couplers and connetors etc. with clamps at one metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.Internal work exposed on wall 2025 (25mm OD) pipe

Providing and Fixing white vitreous China pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of make Cera, Hindware

Providing and fixing of P.V.C waste pipe for sink or wash basin 32 mm dia. Including Pvc based fitting complete.

Providing and fixing of mirror of superior glass (of approved quality) and of requried shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453 x 357 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete.

Providing and fixing C.P fitting of make Jaquar (continental range)

Towel Ring Round with round Flange

Single Towal rail 600 mm long

Sink mixer with swinging casted spout (Wall mountable Model) with connecting legs & wall flanges

Providing and fixing Central hole basin mixer without popup waste system with 450 mm long braided hoses

Providing and fixing Angle valve

Providing and fixing 15 mm nominal bore C.P bib cock

Providing and fixing of C.P brass showers rose with 15 or 20 mm inlet (100mm dia)

Providing and fixing 160 mm C.P grating for gully, floor or Nahani trap.

Providing and fixing Wall mixer 3-in-1 system with provision for Overhead Shower with 115mm long bend pipe on upper side, connecting legs & wall flanges of Jaquar continental make

Providing and fixing Jet of W.C Pan of make Jaquar

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Star,) (8 No.@2000 ltr). three layer

Providing and fixing PTMT Soap dish holder Jaquar, with concealed fitting arrangement.

Providing and fixing 25 mm dia ball valve (Brass) of approved quality complete

Providing and fixing of C.P brass waste coupling 32mm

Providing and fixing PVC connection pipe with all accerories complete of approved make

Providing and fixing PVC pipes of supreme, Finolax as approved by Engineer- in -charge @ 4 kg/cm2 and fittings including testing complete.

150 mm dia pipe

110 mm dia pipe

Providing and fixing PVC pipes of supreme, Finolax as approved by Engineer- in -charge @ 6 kg/cm2 and fittings including testing complete. 150 mm dia pipe

Providing and fixing PVC fitting and accessories of Supreme,Finolex make

Plain bend 150 mm dia

Plain bend 110 mm dia

Door bend 110

Cowel 150

Cowel 110

Tank Nipple 32 mm

Constructing Brick masonary manhole in cement mortar 1:4 (1 cement :4 coarse sand )RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finshed with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design.

In side size 90x80 cm and 45 cm deep with FPS brick class desiginated 75 with top precast RCC slab in M20 grade casted in frame of MS angle 65x65x5 mm having a provision of rectangle drop down type handles made of MS bar/flat to facilitate lifiting of top slab as and when required. incl. (all carrages ) complete.

Extra for depth beyond 45 cm of brick masonery chamber 90x80 cm with FPS bricks

Providing & fixing water motor (Electric ) (1.5 HP) (Crompton make including fitting complete.

Providing and fixing float valve (Brass)

Providing and fixing check valve (Heavy)

Providing and fixing 150x150 mm C.I jali

Providing of cupboards of 2'-0" depth with a central vertical partition and having 4 number shelves in half of its width with shutters complete. All components of the cupboard will be made up of 19mm BWR ply ,Termite proof as well as water proof, complete with necessary screws hinges, catchers, including handles, locks, tower bolt etc. including top finished with sunmica of Ist quality and priming coat of wood primer of superior quality inside the cupboard alongwith two coats of synthetic enamel paint complete. (Box Type using Century or Green Ply) including fixing stainless steel curtian rod

Providing and fixing IS :3564 marked Aluminium extruded section body tubular type universal hydraulic door closer (having superior brand) embossed on the body, door weight upto 36-80 kg and door width upto 700 mm with necessary accessories and screws etc. complete. (Godrej/Sandhu make)

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels.plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts compete, i/c fixing the railing with necessary accessories and staimnless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nut, bolts, fasteners etc.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work (Asian/Narolac)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work (Asian/Narolac)

Providing and laying Double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 60x60cm (RAK, Kajaria make)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and laying 40 mm thick with cement concrete. 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm Nominal size) under floor (incl. all carriages) complete.

Providing and fixing 18mm plaster in two coat on exterior side base coat 12 mm and finally coat 6 mm

Half brick masonry with bricks of class designation 75 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including extra for hlaf brick masonry in superstructure above plinth level upto floor V level & extra for providing and placing in position 2 Nos. 6 mm dia M.S bars at every third course of half brick masonary with F.P.S bricks.. (including all carriages) complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-inCharge (glazing, panelling and dash fasteners to be paid for separately. For fixed portion

Powder coated aluminium (minimum thckness of powder coated 50 microns)

For shutters of doors, windows & ventilators including providing and fixing hinges I pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber I neoprene gasket required (Fittings shall be paid for separately.) Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium partation board 4.50mm thick (Eurobond/alingstrong)

Providing and fixing aluminium fitting (powder coated)

Handle 125 mm

Tower Bolt 150x10 mm

Disposal of surplus excavated earth to the specified site by mechanical transport beyond the muncipal limit including loading unloading complete job

Providing and fixing G.l. pipes complete with G.l. fittings including trenching and refilling etc. external work) 40 mm dia. nominal bore Parkash Surya medium make

Providing and fixing G.l. Union in existing G.l. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the arth or cutting of wall and making good the same complete wherever required. 40 mm dia. nominal bore (DRP Make)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia (heavy type)

Parshotam Singh

M/S JUGAL KISHORE

Rajinder Singh

Ashok Kumar Gupta