SPECIAL REPAIRS TO ROOF AND CERTAIN MISC REPAIR TO BLDG NO J 90 AT OLD ALLENBY LINES AND SPECIAL REPAIRS TO SEWAGE LINE SEPTIC TANK AND SOAKAGE WELL AT CERTAIN BLDG NO J 84 M 1 M 9 AND CAVALRY BARRACK OFFR MD ACCN UNDER GE NORTH SECUNDERABAD

Amount

Taking down of old bituminous tarfelt or any other type of roof treatment from roof/ concrete surfaces removal to distance exceeding 250 metres and not exceeding 500 metres from the site and cleaning of the roof surface with wire brush to make it free from dust, dirt etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided in roof padding concrete etc complete incl removal of demolished material to a distance complete all as specified and as directed.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded aggregate mixing with water proofing compound at the rate of 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamferred on edges and formwork etc complete all as specified and as directed. Note: Water proofing compound will be measured and paid seperately under relevant items of this schedule.

Material and labour for rendering 10mm thick on roof surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement and finished even and smooth complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule.

Supply only water proofing compound complete all as specified and as directed.

M & L for providing water proofing treatement with APP based polymeric membrane minimum weighing 3 kg/ Sqm and minimum 3mm thick reinforced with polyester non oven fabric ( weight not less than 150gm/Sqm) applyied on one coat of oil based bitumen emulision primer @ 0.3 lit per sqm ( OR as per the directions of manufacturer instructions) including cleaning of surface thoroughly from dust, dirt and projections. Laying of membrane by forced ( torch) application with 10cm overlaps . A coat of blown bitumen 85/25 grade @ 1.2 Kg/sqm to be applied on top of memberane, finally coating the surface with bituminous aluminium paint @ 100gm/Sqm complete all as specified.

Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litres per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non wove fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces with the over laps of 10 centimetres APP, membrane mineral grit finish on roof slab all as per manufacturer's instructions and zonal specification etc complete all as specified and as directed.

M&L for 20mm thick screed bed in CM 1:4 duly mixing with water proofing compound at the rate of 2% by weight of cement or as per manufacturer's instructions complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant item in this schedule.

M&L for laying 300 mm x 300 mm x 20 mm thick PCC tiles (Hydraulically pressed) with grey cement, set, jointed, cut and polished. The joints shall be grouted and immediately after gouting, the joints shall be pointed flush in in CM 1:3 mixed with 150ml per kg of cement of polymeric based lilquid water proofing additive by weight of cement or as per manufacturers instructions etc complete all as specified and as directed. Note : Supply of polymeric based liqluid water proofing compound will be measured and paid separately.

Supply only polymer based lilquid water proofing compound complete all as specified and as directed.

M&L for making the grooves to 'V' section in existing parapet walls/columns over RCC roofs, cleaning out and tacked the polymeric membrane in to the grooves and sealed solidly with a hot mixture of bitumen and clean dry sand in the ratio of 1:1 by weight etc complete all as specified and directed.

Disconnecting existing water tank setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position including necessary cleaning and repairing exc 250 litrs & not exc 500 litrs tanks complete all as specified and as directed.

Disconnecting existing water tank setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position including necessary cleaning and repairing exc 500& not exc 1000 litrs tanks complete all as specified and as directed.

Supply and fix in replacement of 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Supply and fix in repairsreplacement of 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs, any thickness including cover fillets complete all as specified and as directed.

S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) over the grid providing 4mm thick HPSC pre primed self designer texture non asbestos fibre cement building board fixed to frames etc complete all as specified and as directed.

Taking down cement plaster from brick/stone wall of any description etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or stone masonary surfaces in cement mortar 1:4 and finished the surface smooth and even without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed.

M & L for rendering 5 mm thick in cement plaster 1:3 on concrete surfaces of ceiling finished even and smooth without using extra cement in patches n exc 3 sqm each patch complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer and wall putty etc complete all as specified and as directed.

M&L for Complete removal of existing treatment on walls and applying 2 coats of exterior weather proof paint over a coat of exterior primer including preparation of surface and complete all as specified and directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M&L for applying two coats of plastic emulsion (Royal shyne luxury emulsion) over the primer surface of approved make and shade on walls of up to any height etc, complete all as specified and as directed.

M&L for preparation of old painted ceilings surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height etc complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying 2 coats of exterior weather proof paint over a coat of exterior primer including preparation of surface and complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

Dismantling stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for machine cut granite 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like laid over & including 10mm thick bedding /backing coat in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab complete all as specified and as directed.

Rounding and moulding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, over cement screed in cement mortar 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick backing coat in CM 1:4 complete all as specified and as directed.

S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as specified and as directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified.

S&F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified.

S&F MS sliding door bolts plate type stove enamelled black, with brignt bolt not less than 12mm dia with and including a minimum of 6 Nos bolt and nuts, four on bolt plate and two on staple plate of 300mm length of bolt complete all as specified.

S&F for Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 sqm and not exc 4.00 Sqm each including Builders Hardware complete all as specified and as directed

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, complete all as specified and as directed. Make: NCL Alltech or equivalent as approved by GE.

S & F PVC solid ventilator frame size 55 X 47mm with wall thickness of 5mm made out of extruded 5mm PVC sheet, mitre cut at two comers and jointed with 2 Nos of 150mm long brackets of 15 x 15mm MS square tube the two vatted profiles are to be reinforced with 19 x 19mm MS squre tube the 50% of bottom portion is fixed with 4mm pin headed glass and balance 50% of top portion is fixed with 4mm thick pin headed glass lowers and cover with 0.36mm dia stainless steel wire mesh at top portion including necessary PVC beading with screws and 3 Nos 12mm dia MS guard, bars fixed in ventilator frame including two coats of synthetic enamel paint over a coat of red oxide primer to MS guard bars etc all as per specified and directed. Make: SINTEX or epuivalent seetings in RAJSHRI, NANDI make as approved by accepting officer.

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed .

M&L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Demolition of PCC of any description and in any position not otherwise specifically provided for(un-reinforcement ) and removal of rubbish/ demolished materials out of MD land complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or concrete or brick surrounds. Glazed with putty or fixed with beads complete all as specified.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane and all as specified.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and directed.

M&L for Cutting and grooving of wall for fixing of GI pipe lines and after fixing of GI pipe line and making good of all cutting surfaces with CM 1:6 etc complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanised, 15 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and directed.

S&F in repairs for 20mm gun meteal,globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed complete all as directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

S&F in repairs vitreous China counter top wash basin of size 600 x 450 x 190 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. MAKE: CAT No Jaquar Code- QNS-WHT-7601AT No 10051 or equivalent in HINDWARE/ PARRYWARE/CERA as approved by GE.

Labour for cutting of granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangments complete all as specified and as directed.

Supply and fix in repairs towel ring brass chromium plated complete all as specified and as directed.

S&F in repairs Low level flushing cistern 10 ltr capacity, PVC including waste pipe, down take pipe, pair of CI brackets and all accessories complete all as specified and as directed.

Supply and fix in repairs of PVC connection of 15mm size with PTMT nuts of length 450mm complete all as specified and as directed

S&F in repairs brass chromium plated tubular towel rail 600 mm long complete all as specified and directed.

Supply and fixed in repairs soap dish brass complete all as specified and as directed.

Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed.

S&F in repairs CP brass 32 mm bottle trap for wash basins / urinals with inlet and outlet screwed for pipe connections including necessary packing, union and cap and fixed complete all as directed. Make :Jaquar, Code ALD 769 or equivalent in Hindware/ Parryware/CERA as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated wall mixer with provn for telephone shower arranement & crutch, connecting legs & wall flanges for mixing hot and cold water, screwed down complete all as specified and as directed. Make:CAT No QQT-7271 of JAQUAR or equivalent in HINDWARE/PARRYWARE/CERA as approved by GE.

Supply and fix in repairs 15mm bore brass Chromium plated central hole basin mixer with out popup waste system with 450 mm long braided hoses, screwed down complete all as specified and as directed. MAKE: CAT No KUP-35125PM of JAQUAR or equivalent in HINDWARE/PARRYWARE/CERA as approved by GE.

Supply and fix in repairs over head shower 80mm dia round shape multi flow (ABS Body chrome plated with gray face plate) with rubit cleaning system complete all as specified and as directed.

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc including screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed.

Supply and fix in repairs 15mm dia brass chromium plated two way Bib tap with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs of 15 mm bore stop cock, brass chromium plated angle cock with wall flange type, fancy type, and high pressure, with flange screwed, and screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixed in repairs brass chromium plated concealed stop cock,regular body with adjustable wall flange screwed down, high pressure, with crutch handle, screwed both ends for 15mm dia bore iron pipe or for unions complete all as specified and as directed.

S&F in repairs CP angle cock 15mm bore fancy type chromium plated.with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair CP corner glass 12mm thick with brass bracket screws etc complete all as specified and directed.

Dismantling mangalore pattern roofing tiles single layer including ridge tiles laid, bedded in cement mortar etc complete all as specified and as directed.

Dismantling battens for tiles any size exceeding 15cm in spacing complete all as specified and as directed.

Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc. under 40 Sqcm in section complete all as specified and as directed.

Dismantling timber Scantling framed work 40 Sqcm and over in section, in any position complete all as specified and as directed.

S&F Rolled Mild Steel as in Joist, channel, angle, or tee sections, fixed independently as in rafter and purlin, without connection plates, etc. ( cut to ordinary lengths i.e within 20mm of the length indicated) to Fe-290-(Gde E- 165) complete all as specified and as directed.

S&F Mild Steel wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed

M&L for new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes (salt glazed ware AC or reinforced concrete) set in cement mortor 150mm dia complete all as specified and as directed

Demolition and breaking up drain pipes (salt glazed ware AC or reinforced concrete) set in cement mortor 200 mm dia complete all as specified and as directed

Excavation in trenches n.exc 1.5m wide and not exc 1.5m deep for laying of drain pipes etc or for manhole, etc and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches exc 1.5m wide and not exc 3.0m deep for laying of drainpipes etc or for manhole, etc., and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

M&L for concrete bed to 150 mm dia pipes of cement mortar 1:3:6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M&L for concrete bed to 200 mm dia pipes of cement mortar 1:3:6 type C-2 including packing under and haunching against the side of pipes after they are laid and tested complete all as specifed and directed.

M & L for 150mm bore reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed.

M & L for 200mm bore reinforced concrete pipes, class NP2 with one collar per length of pipe complete all as specified and as directed.

M&L for Cutting into existing manholes or connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required, 150mm dia of pipe complete all as specified and directed.

All as per items No 95 above but 200mm dia of pipe.

Demolition of RCC of any description and in any position not otherwise specifically provided rainforced (rainforcement of cut as required to facilasite demolition etc) and removal of rubbish/ demolished materials outside of MoD land complete all as specified and directed.

M & L for rendering 15mm thick in cement mortar 1:6 on other than fair face of brick or concrete surface, finished even and smooth with out using extra cement complete all as specified and as directed.

Retuning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick complete all as specified and as directed.

Removal of surplus soil to a distance eexceeding 500 mtrs but not exceeding 1.50 km complete all as specified and as directed.

M & L for cement concrete type C2 1:3:6 (using 40mm graded stone aggeregate) in foundation, filling and mass concrete complete all as specified and as directed.

M & L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, water troughs, channels inside manholes and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M & L for 15mm thick rendering over brick or concrete surface in cement mortar 1:4 finished smooth and even mixed with integral water proofing compound @ 2% by weight of cement or as per manufactureres instructions complete all as specified and as directed. Note : - WPC will be measured and paid separetely under relevant items of this schedule.

M & L for rendering 15mm thick in cement mortar 1:6 on other than fair face of brick or concrete surface, finished even and smooth with out using extra cement complete all as specified and as directed.

M & L providing precast cement concrete 1:2:4 type B-1 in cover slabs (for manholes etc.) and similar articles with plain faces with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified and as directed.

M & L MS TMT bars 6mm dia and over upto and including 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F MS TMT bars 10 mm dia & over cut out length bent to shape including cranking, bending and binding with 0.9 mm dia mild steel wire or securing with clip complete all as specified and as directed.

M & L in repairs salt glazed stone ware gully traps square or round mouthed type 150 x 150mm complete all as specified and as directed.

S & F UPVC/PVC (SWR) pipes 110mm dia fixed to walls single socketed with rubber ring joints including dismantling old pipes complete all as specified and as directed.

S&F on site LLDPE conventional septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection and copacity of tank 5000 ltrs etc., for 20 users complete all as specified and as directed.

M&L for construction of Soakage wells including excavation in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4m dia x 3.0 m effective depth as per drawing No.TD/ST/748, sheet No 1/1 dt 22 Jan 2011 complete all as shown on drawing and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8 mix,type D2 (using 40 mm graded stone aggregates) as in subbase to floor complete all as specified and as directed.

M&L for designer rubber moulded chequerred cement concrete tiles with mixture of grey and white cemetn in equal porportions with pigments of size 300 x 300 x 22mm or 250 x 250 x 22mm thick and set and pointed in neat cement slurry in floors over a screed bed or bedding layier in CM 1:6, 15mm thick for laying floor finishes etc complete all as specified and as directed.

S& F in repairs cast iron Nahani trap without grating and with 75 mm outlet including jointing to waste pipes fixed in cement concrete type B1 1:2:4 mix etc complete all as specifed and directed.

S&F in repairs vitreous china water closet 'Orissa' pattern of size 580mm X 440mm, white with integral foot rest and 'P' trap (excluding flushing cistern), but including PVC flush pipe and provision of lime concrete bedding complete all as specified and as directed.

S&F Non Skid (coloured) ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specifed and as directed.

SKY CONSTRUCTIONS

SAI RUPA CONSTRUCTIONS

ATUL ENTERPRISES

P VIJAY KUMAR

M/s Bhavani Constructions