Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC Being lowest Bidder | |
| 2 | L2₹21.5 L+₹2.9 L (15.5%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹25.4 L+₹6.8 L (36.4%)Rejected-Finance H NO 400 STREET NO 1 SAIN GHAR PATHANKOT GURDASPUR PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹25.6 L+₹7.0 L (37.3%)Rejected-Finance 381 BHARAT NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹27.6 L+₹9.0 L (48.1%)Rejected-Finance 1ST FLOOR GURJEET MARKET DHANGU ROAD | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
5 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT
PERIODICAL SERVICES AND PLASTERING TO CERTAIN BUILDINGS IN NO 01, 02 and 03 AREA AT AFS PATHANKOT
2023_MES_612764_1
8422/GE/PAF-28/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) PATHANKOT
AS per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) PATHANKOT
₹90,000
Yes
12 Oct 2023
8 Aug 2023
12 Sept 2023
8 Aug 2023
5 Sept 2023
22 Aug 2023
Amount
Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters by brooming down with steel wire brushing scrapping down smoke dust, moulds, moss and efflorescent salts and removing oily and greasy spots etc applying one coat of white wash with auto paint roller on old surfaces of walls complete all as specified and directed by Engineer-in-Charge
All as per item No 1, above but on ceiling surface complete all as specified and directed by Engineer-in-Charge
Complete removal of existing treatment by using vacum based sanding machine on wall including scraping,removing all muds crak with wire brush where required and gunny bags from old surface free from any depression complete all as specified and directed by Engineer-in-Charge. Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/ camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Material and labour two coats of distemper oil emulsionon already preprade surfaces, of shade as approved by Engr-in-charge by auto paint roller over a coat of primer on prepared surface to make the surface smooth without any marks complete all as specified and directed by Engineer-in-Charge. Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Material and labour tow coats of plastic emulsin paint (to be applied with auto roller) over a coat of primer including preparing the surface by vacuum based sanding machine and applying a coat of 2mm thick wall ware putty making the surface even and smooth free from any depression/holes/nails complete all as specified and directed by Engineer-in-Charge Note : (i) Colour/shed to be decided by Engr-in-Charge). (ii) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (iii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
All as per item No 5, above but on ceiling complete all as specified and directed by Engineer-in-Charge Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Material and labour preparation of old steel surfaces exc 10cm width or grith and applying one coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Material and labour preparation of old wood or wood based surfaces and One coat of synathetic enamel paint complete all as specified and directed by Engineer-in-Charge Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Taking down cement or cement lime plasteron brick or stone walls etc.including raking out joints,hacking for key,scrubbing down with water,etc. in any position complete all as specified and directed by Engineer-in-Charge Note :- (i) All the wall/floor and surrounding to be made clean after applying OBD/camouflaging painting to the entire satisfactory of Engr-in-Charge. (ii) Due care should be taken by the contractor for cover of furniture already existing in the qtr/bldg.
Material and labour Rendering 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) furnished even & fair using extra cement complete all as specified and directed by Engineer-in-Charge
Material and labour for 15mm thick cement plaster in cement morter 1:4 on bricks or concrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. Note rate for form work if reqd to be incl in the quaoted by the contractor.
Rendering dubbing coat over damaged irregular surface of patches at colms,chajja,canopy and soffits, roof projections ceiling facia etc using GI Chiken Mess of size 0.25mm thick and 20mm aparture fixed with nails including necessary scaffolding arrangement as required at site average 15mm thick incm 1:4 over cement slurry coat thick @ 3 Kg/Sqm making the surface even followed by 5mm hick rendering in cement mortar 1:3 furnished even and smooth including applying two coats of weather proof emultion paint including making of drip course as reqd complete including roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed by Engineer-in-Charge. Note : Rate for form work if reqd incl in the rate quaoteed by the contractor.
Material and labour applying two coats of acrylic exterior emulsion paint as approved of any shade pattern in camouflage pattern over a coat of primer including preparation of newly plastered surfacessurfaces as per manufacture instructions complete all as specified and directed by Engineer-in-Charge. Note Removing of vegitation/plantation requird for carring the work deemed to be included in the rate coated by contractor.
Material and labour Preparation of newly plastered surfaces and applying two coats of oil bound distemper, over a coat of primer including chalk whitening on plastered surfaces of walls complete all as specified and directed by Engineer-in-Charge.
Material and labour for cutting and widending existing cracks in V-shape not exc 1 cm in grith in wall and than filling in with "Crack-X" of Pidilite or equivalent including making good to facings complete all as specified and directed by Engineer-in-Charge.
Material and labour applying 2-3mm thick Altek/Birla white wall care putty on wall/ceilling to obtain smooth surfaces and even finish by using vacume based sanding machine,including preparation of surfaces etc. complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 3mm thick plain sheet glass ordinary quality and glazing with oil putty in sqm n exc 0.5 sqm in each pane at any floor including hacking out old broken glasses from any type of frame complete all as specified and directed by Engineer-in-Charge.
All as per item No 18 but figuread glass pin headed type complete all as specified and directed by Engineer-in-Charge.
Preparation of old plastered or unplastered surfaces of wall, chajja including cornices, pillasters remove all smoke dust,moulds,moss and efflorescent salts and removing oily and greasy spots etc applying one coat of distemper oil emulsion of shade as approved by Engr-in-charge on old surfaces of walls complete all as specified and directed by Engineer-in-Charge
Material and labour Preparation of old plastered or unplastered surfaces of wall including cornices, pillasters to remove all smoke dust,moulds,moss and efflorescent salts and removing oily and greasy spots etc at applying one coat acrylic exterior emulsion paint as approved of any shade pattern in camouflage pattern (as approved by GE) upto 12mtr hight) per manufacture instructions complete all as specified and directed by Engineer-in-Charge. Note Removing of vegitation/plantation requird for carring the work deemed to be included in the rate coated by contractor.
M/S SINGHAL ENGINEERS
pardeep singh marwaha
M/S SATYA CONSTRUCTIONS
Vijay Kumar Contractor and Engineers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .