Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹38.3 L+₹47,851.94 (1.27%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹38.3 L+₹52,632.25 (1.39%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹38.6 L+₹86,391.86 (2.29%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹39.0 L+₹1.2 L (3.19%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹35 Cr
EMD Value
₹70,000
Closing Date
13 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS C/O 99 APO
WELCOME MAINT AND ALLIED WORKS IN MD OFFICER ACCN AT KALIMPONG MIL STN UNDER GE 867 EWS.
2023_MES_605030_1
GE/867/TOKEN/19 OF 2023-2024
Open Tender
Civil Works
Item Rate
270 days
GE 867 EWS
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
₹70,000
Yes
26 Jul 2023
22 Jun 2023
15 Jul 2023
22 Jun 2023
13 Jul 2023
6 Jul 2023
23 Jun 2023 - 5 Jul 2023
Amount
M&L scrapping of existing treatment and applying one thin layer of wall care putty (Birla white or equivalent) and then applying two coats of oil bound distemper over a coat of priming coat after preparation of wall surfaces complete all as specified and directed.
M&L washing ,rubbing down and stopping of distempered surface on walls and applying one coat of Oil bound distemper on Walls, complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed.
Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and smooth (without using extra cement) complete complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even complete all as specified and directed.
M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for two coats of old bound distemper over a coat of priming coat on newly prepared wall surfaces, including 3 mm thick layer of wall care putty (Birla white or equivalent) all as specified and directed.
M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of old painted wooden Surfaces of any description n exc 10cm width or girth when unconnected with other painting or when painted in different tint and appying one coat of synthetic enamel paint all as specified and directed.
M&L for 25 mm thick plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in leveling coarse for tile floor complete all as specified and directed by Engineer-in-Charge.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening after Resecuring or easing & adjusting complete all as specified.
Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified.
Taking down shutters of any description n'exc 1 sqm each complete all as specified.
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.
S&F pressed steel frame of size 125 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S&F pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock ,strike plate, etc complete all as specified.
S&F 35 mm thick (batten thickness) second class hard wood , plain, framed panelled shutters (any number of panels), with panels of 12 mm thick timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density wood particle board with commercial face veneers complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F 35 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and without sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F 30 mm thick (batten thickness) second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc , divided into squares, with plain chamfered or rounded, mitred and with rounded ,mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and directed. (Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I)
S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts,flushing cistern & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed including dismantling existing EWC. Make Hindware, Jaquar or equivalent
S&F Vitrous china wash hand basin of size 550mmX400mm white flat back including 32mm PTMT Waste coupling half or full threaded weight 45gms and fixing brackets Make Hindware, Jaquar or equivalent including dismatling existing wash hand basin.
S&F 32mm Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fixed complete to walls,ceilings or in floors etc.
S&F 40mm High density poly?ethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including taking down existing sink.
Taking down & refixing Mixing valve (Mixture unit) including three joints to steel pipes or unions and plugging and screwing to walls
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles a PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; t both side Prelam PVC sheet used instead of Plaincolour PVC sheet. Stile and rails feathered at edges beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F Asbestos cement plain building boards 4mm thick, fixed to timber framework with screws
M&L 2nd Class HW Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads cross section exc. 13 Sqcm and néxc. 25 SqCM
M&L 2nd classs HW fillets sectional area exc. 3 Sqcm and néxc. 6 Sqcmt bull?nosed, splayed, chamfered or rounded on one edge or face
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.
S&F steel window with side hung shutter, including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed.
S&F steel window or ventilator fixed type with glazing bar complete complete all as specified and directed.
M&L for 12 mm thick plywood , grade BWR type BB, fixed with scews to timber frame work complete all as specified and directed.
S&F Ist Class hard wood external teak wood lipping, 6 mm thick on exposed surface of prelaminated particle board fixed with nails complete all as specified and directed
M&L for 19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L 2nd Class Hard wood Plain filletsSquare, rectangualr or traingular in section wrought bull nosed, splayed, chamfered or rounded on one edge or face, not exc. 3Sqcm in sectional area fixed with nails
M&L preparation of new wooden surfaces of any description , not exc. 10cm in width or girth when unconnected with other work or painted with different tint applying two coats (undercoat & Finishing coat) of synthetic varnish
S&F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including both faces is covered with decorative face veneer with lipping/frame to match
S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed
S&F 75 mm size butt hinges, medium weight , stainless steel complete all as specified and directed
S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed in repair complete all as specified and directed
S&F of continuous (piano) hinges mild steel bright finish or electro galvanised 30 mm width of flaps complete all as specified and directed.
S&F of 100 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F of 200 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F 125 mm size Aluminium handles, cast type, anodised and fixed all as specified and directed.
S&F 150 mm size Aluminium handles, cast type, anodised and fixed complete all as specified and directed.
S&F of 300 mm long aluminium alloy, anodised sliding door bolts with haps staple(bolt type), and fixing clips of sheet, cast or extruted sections and fixing bolt and sliding bolts of extruted sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F of 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia if wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.50 sqm in each pane complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.
S&F in repair Brass chromium plated shower rose with or without swivel joints 125 mm size , including fixing to steel pipe or unioncomplete all as specified and directed.
S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.
S&F in repairs angle , stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.
S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.
S&F in repairs kitchen plate rack made out of stainless steel 0.50 mm thick sheet with partitions and size of rack 800 x 250 x900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.
S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) or fixed with adhesive make :"Sika"complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm on vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick backing plaster in cement mortar (1:4) or fixed with adhesive make :"Sika" complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) or fixed with adhesive make :"Sika"complete all as specified and directed.
M&L Glazed ceramic coloured tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick screed bed or bedding layer in CM (1:4) finished even and rough complete all as specified and directed.
M&L for vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
All as per item ser No 88 here-in before but on vertical surfaces such skirting/ dados etc including 15mm thick rendering in CM (1:4)
Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.
M&L for reinforced cement concrete (nominal mix) type A1 (1:1½:3) (20mm graded crushed stone aggregate) as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like and the like complete all as specified and directed.
Use & Waste of formwork to Chajjas, chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed.
S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
S&F of TMT bars 6 mm to 8 mm dia, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar
M & L Granite (of any type) work 20MM thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr - in - Charge.
Demolition and breaking up old broken , PVC (SWR) , Cast Iron, AC, SWG soil waste and vent pipe of 75/110 mm bore including accessories set in cement mortar and removing rubbish from site as directed by Engineer-in-Charge complete all as specified and directed.
S&F of 110 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F of 75 mm PVC (SWR) drain pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) junction single (Single T) equal or unequal with access door jointing with solvent cement complete all as specified and directed.
S&F of 110 X 75 mm bore PVC (SWR) reducer including jointing with solvent cement complete all as specified and directed.
S&F of 75 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed.
S & F Wall Mixer 3 in 1 System with Provision for Both Hand Shower and Overhead Shower with 115 mm Long Bend Pipe Cat. No.: F110019 of make Hindware or equivalent in Jaquar all as specified and directed by Engr-in-Charge
S&F Towel Rack 600mm Long With Lower Hangers, Stainless Steel Product Code: ACN-CHR-1181S Product Range: Continental make Jaquar or equivalent make in hindware complete all as specified and directed.
S&F Paper Holder with Cover make hindware Cat. No : F840009 or equivalent make in Jaquar complete all as specified and directed.
S & F Sink Mixer with Swivel Cat. No.: F720020 (Wall Mounted) of hindware or equivalent make in Jaquar all as specified and directed by Engr-in-Charge
S&F in repairs decorative type drapery curtain rod (curtain rails), of 25 mm dia powder coated with fixing . Including decorative Knobs and fixiing in pairs of brackets, stops etc complete all as specified and directed.
S&F chromium plated connections pipe 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers,Suitable for Basin Mixers)
S&F Chromium plated Hand Shower (Health Faucet) 8mm dia with 15mm dia pipe with 1 Meter Long Easy Flexible Tube in Chrome Finish & Wall Hook
S&F in repairs CP Central hole Basin Mixer w/o Popup Waste Cat. No.: F200014 for mixing hot & cold wate, made of Hindware star white or equivalent of Jaquar
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking down existing wire mesh
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion including taking down old point wiring.
All as per item No 118 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.
All as per item No 118 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board.
All as per item No118 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size.
All as per item No 118 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
All as per item No 118 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4.00 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia, medium grade with all necessary fittings, surface wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC Boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.
All as per item No 124 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.
All as per item No 124 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board.
All as per item No 124 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size.
All as per item No124 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Supply and fix switch piano flush button, single pole, 5/6amps, one way all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix switch piano flush button, single pole, 5/6amps, two way complete all as specified and as directed. Make : Anchor/Havells/Plaza
Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed. Make : Anchor/Havells/Plaza
Supply & fixing Bell push flush type, 5 Amps button. Make : Anchor/Havells/Plaza
Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fix in repairs switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fixing switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type universal all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fixing in repairs switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type universal all as specified and as directed. Make : Anchor/Havells/Plaza
Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size (concealed), medium grade with all necessary fittings, surface wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches,socket outlet,regulator etc. complete all as specified or directed including testing on completion. Note :- Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases,black wire for neutral and green wire for earth. Two run of 1.5 Sqmm for phase and neutral and one run of 1.5 Sqmm for earth wire.
All as per item No 138 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board.
All as per item No 138 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.
Supply and fixing modular switch flush button ac 230 V single pole 6 Amp one way all as specified and as directed.
Supply and fixing modular switch flush button ac 230 V single pole 16 Amp one way all as specified and as directed.
Supply and fixing modular socket 6 Amp 5 pin all as specified and as directed.
Supply and fixing modular socket 6/16 Amp 3 pin combined all as specified and as directed.
Supply and fixing compact batten of aluminium strong body suitable for single T8 LED tube rod complete all as specified and directed. Make:- Cat part No-REGALBATTENT8UPTO1X22WDSBSWH of Havells or equivalent Philips/Crompton.
Supply and fixing LED polycarbonate T8 tube, 18 Watt, CCT - 3000/4500/6500K 6500K, 2150 lm, Polycarbonate housing in opal finish provides glare free uniform light, 1800lm, 30000 burning hours, Inbuilt aluminum heat sink, Surge Protection- 3KV, double sided connection complete all as specified and directed. Make :- PHOTONULTRAE2.01213T8SSTL 18WLED865SPC of Havells or equivalent Philips/Crompton.
Supply and fixing LED light fitting with high out put diffuser 2 feet, 10 watt, CCT- 3000/6500 K, 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed. Cat part no. LHEXACP5IN1W010/LHEXACP7IN1W010 of Havells or equivalent of Philips/Crompton.
Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing lamp/angle holder insulated body with back plate for batten fitting all as specified and as directed. Make : Anchor/Havells/Plaza
Supply and fixing LED retro fit lamp B-22, CCT- 3000 K/ 6500 K holder base with poly carbonate body and aluminium heat shrink of 9 W complete all as directed. Cat Part No LHLDEUEEMC8R009/LHLDBWHB4L8R009 of Havells or equivalent in Crompton/Surya.
Supply and fixing round shape 9 watt CCT- 3000/6500 K 220 volts AC surface/recessed mounting with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed. Model no. LHEBFCP5IZ1W009 /LHEBFCP7IZ1W009 of Havells or equivalent of Philips/Crompton.
S & F LED light fitting 1x6Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed. Model –WT202W LED 6S CW PSU S2 PC of Philips or equivalent model of Havells/ Crompton.
Supply and fixing Decorative, wall mounting, made up of Polycarbonate body suitable for 10 W LED lamp (B-2 base), Cat part No LHDL06160099 Model CITY - 3 Make- Havells or equivalent model of Philips/Bajaj / Crompton.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC. Make- Legrand / Siemens/Schindler.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC. Make- Legrand / Siemens/Schindler.
Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 12 way 240 Volts AC. Make- Legrand / Siemens/Schindler.
S&F in repairs metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified. Cat part No 5078 11 Make- Legrand or equivalent in Siemens/Schindler.
Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
All as per item No 158 here – in – before but SPN 32 Amps.
All as per item No 158 here – in – before but SPN 40 to 63 Amps.
Supply and fixing 415V, 10KA 'C' curve miniature circuit breaker (MCB) of TP 25 To 63 Amps capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.
All as per item No 161 here – in – before but TPN 16 To 32 Amps.
All as per item No 161 here – in – before but TPN 40 To 100 Amps.
M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring.
M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring.
M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring.
M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof .(Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring.
M&L in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep
All as per item No 168 here-in-before but of size 175 x 100 x 50 mm
All as per item No 168 here-in-before but of size 200 x 150 x 50 mm
All as per item No 168 here-in-before but of size 250 x 200 x 50 mm
All as per item No 168 here-in-before but of size 350 x 300 x 50 mm
Supply and fix in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete including dismantling of broken fan and deposit to MES store all as specified and directed.
Supplied & fixed in repairs on surface Rigid non-metallic PVC casing caping of size 25 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface by plastering and 2 coat of paint complete all as specified and directed.
Supplied & fixed in repairs on surface Rigid non-metallic PVC casing caping of size 20 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface by plastering and 2 coat of paint complete all as specified and directed.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
SCHEDULE OF CREDIT
SUNIL PRADHAN
RAJU TAMANG
PRASAD PRADHAN AND SON
MS MAYA PRAKASH GOEL AND SONS
MS BRAHMA CONSTRUCTION
G K SUTHAR
HEM RAJ GURUNG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
BOQ_677285.xls
BOQ Document • 0.53 MB
123660232.pdf
Tender Document • 0.10 MB
Tender.pdf
Tender Document • 0.74 MB
123660235.html
Tender Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .