C/o boundary wall of office complex, addition AND alteration over the first floor of CEO office, repair of cup-boards of CEO office etc.BBNDA, Jharmajri (SH- Construction of canteen complex and alteration of first floor of CEO office

Amount

Excavation in drains and channels etc., in earth work including dressing of side and bed and disposing of excavated earth upto a lead of 20 metres and lift upto 1.50 metres disposed earth to be levelled and neatly dressed: (Pick Jumper work)

Providing and laying cement concrete work 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete including cost of form work and reinforcement for reinforced concrete work in : Lintels, beams girders bressumers and Slab and cantilevers upto floor two level :

Providing Tor steel /TMT Steel reinforcement for R.C.C. work including bending, binding and placing in position complete including cost of binding wire upto all heights including carriage of material in all leads and lifts.

Steel work welded in built sections, trusses and framed work including cutting, hoisting,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railing, brackets and similier works complete in all respects.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868(Minimum anodic coating of grade AC15)fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/ panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge.For doors windows and ventilatiors and glazed partitions frames.

Providing and fixing water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to bemeasured & paid for separately) 12mm thick

Providing and fixing aluminium anodised powder coated gril of required pattern to existing w/ventilatior with 80mmx80mm panels holes with 25x8mm thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminiumn channels base frames to be measured and paid for separtely

Providing and laying granite stone in flooring 20mm (average) thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed withC polishing complete. 20mm.thick

Brick work using 2 nd class common burnt clay building bricks in superstructure in cement mortor 1:5 (1 cement : 5 sand) complete in all respect and as per the direction of Engineer-in-Charge.

P/Laying Brick Work Cement Mortar 1:4 (1 Cement : 4 Sand) Second Class Bricks complete in all respect and as per the direction of Engineer-in-Charge.

15 mm cement plaster in single coat on fair side of /stone walls for interior plastering upto all heights including arises, Internal rounded angles, chamfers and / or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:4 ( 1 cement : 4 sand) including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Providing and laying spartic ceremic tiles 5.5mm.thick Nitco or equivalent in flooring (300 x300mm. size) treads of steps laid on a bed of 12mm. thick cement mortar 1:3 ( 1 cement:3 sand) finished with flush pointing in white cement.

Distempering(Two coat) with oil bound washable distemper of approved brand and manufature and of required shade,on Un-decorated wall surfaces to give an even shade,after thoroughly brushing the surface clean of all grease,dirt,loose pieces of scales and also including preparing the surface even and sand papered smooth.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges

Providing and fixing asbestos cement plain ended valley gutters with bolts nuts bitumen washers etc and flat iron brackets 40x3 mm size including asbestos rope amnd plastic roofing compound in joints complete

Providing and fixing Alluminum tower bolts heavy duty (berrel type) of required shade and colour with screws etc. complete 250 x 16 mm

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 125mm

Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. 100mm

Providing and fixing of GI OREO Metal Suspended ceiling system of approved make DEXUNE/HUNTER DOUGALS/ ANUTONE having OREO GI lay in perforated with ffleece 600x600x0.5mm (TEGULAR)EDGE TILES in global white colour to be laid on regular 24mm wide T-section flanges colour having rotary stitching on the main runner with web height of 38mm, 1200mm & 600mm cross Tees with web height of 26mm. The tiles should have humidity resistance (RH) of 100%, with light reflection of 62% rockwool backing 50mm and 48 kg density to achieve NRC 0.9 shall have to comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum center. The first & last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross Tees to be interlocked between main runners at 600mm center to from 1200x600mm module. Cut cross tees longer than 600mm require independent support. 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centerraly between the 1200 mm cross tees . Perimeter trim to be wall angles of size 3000x19x19mm ,secured nto walls at 450mm maximum centers and suspended with acessories supplied by hilti consisting of HLC sleeve Anchor Fasteners of thread size 6.5mm x 25/5 with soffit cleat made of galvanized steel of size 27x37x25x1.6mm & level clip in dimensions of 85x30x0.8mm with 4.00mm GI wire complete as per drawings, specification and direction of the Engineer-in-charge but excluding the cost of painting with. (Ceiling Only without frame work)

Providing and fixing on wall face PVC Rain water pipes including filling the joints with spun yarn and cement mortar 1:2 (1 cement :2 sand) 150 mm dia pipe metre

Providing and fixing 50 mm thick Puff steel sheet in roofing withhot dipped metallic zinc coated sheet with top coat of regular modifiedpolyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing 100 mm thick Puff steel sheet in wall withhot dipped metallic zinc coated sheet with top coat of regular modifiedpolyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.

Providing and fixing to wall ceiling and floor (ISI marked) galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor including carriage of material in all leads and lifts: JINDAL / TATA Make. 15mm bore

Providing and fixing to wall ceiling and floor (ISI marked) galvanised mild steel tubes (medium grade) tube fittings and clamps including making good the wall, ceiling and floor including carriage of material in all leads and lifts: JINDAL / TATA Make. 20mm bore

Providing and fixing vitreous china wash basin with single/double hole for pillar tap with C.I or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of material in all leads and lifts. (a) Flat back 550x400mm.confirming to BIS Specifications Ist quality) (Make Hindware or equilant)

Providing & fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads & lifts.

Providing & fixing C.P. brass bib tap with capston head 15mm dia confirming to B.I.S.specifications Ist quality including carriage of material in all leads & lifts.

Providing and fixing C.P. brass pillar tap with capasten head 15m dia including carriage of material in all leads and lifts confirming to BIS Specifications Ist quality.

Providing and fixing P.V.C. connection pipe with brass unions including carriage of material in all leads and lifts 30/45cms length 15mm nominal bore.

Providing and fixing PVC. Waste pipe for wash basin or sink including carriage of material in all leads and lifts.32 mm Nominal size.

Providing and fixing Polythene water storage tank for storage of water upto all heights keeping water hygenic & safe for drinking etc. moulded to seamless perfection from FDA approved grades of polythene (LDPE/ HDDE/CLDPE) to BIS-12701-1989 with 40 mm no,minal bore galvanised steel scour with fittings 25mm nominal bore galvanised mild steel overflow tubes tube with fittings and mosquito proof coupling of approved municipal design, 15 mm nominal bore ball valve and mosquito proof galvanised coupling including provising pads of sizes as required and complete tubes as per directions of Engineer-in-Charge including carriage of material in all leads and lifts (a)2000 litres net capacity storage tank of ISI marked sintex make with double.layer including MS Stays for water storage tank.

Providing & fixing G.I/ M.I. Union for wash basin or sink of ISI Specification including carriage of material in all leads & lifts.(a) 15mm.

Providing and fixing brass stop cock including carriage of material in all leads lifts confirming to BIS Specifications Ist quality. 15mm nominal bore

Providing and fixing Kitchen Sink with C.I or MS brackets painted white including cutting holes in walls and making good the same but excluding fittings White Glazed fire clay 600x450x150mm including carriage of material in all leads lifts confirming to BIS Specifications Ist quality.

Providing and fixing C.P. brass pillar tap with capasten head 15m dia including carriage of material in all leads and lifts confirming to BIS Specifications Ist quality.(Make Jaguar or quivalant)

Providing and fixing C.P. brass towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass screws including carriage of material in all leads and lifts 600X20mm size confirming to BIS Specifications Ist quality.

Providing and fixing vitreous china wash down water closet wall hanging (European type WC pan)with intergal "P" or "S" trap including jointing the trap with soil pipe in cement mortar 1:1 ( 1 cement :1 sand) seat and cover to be measured and paid for seperately including carriage of material in all leads and lifts confirming to BIS specification Ist quality.Anglo Indian (wall hanging Closet ).(Make Hindware or equilant)

Providing and fixing 10.00/12.50/15.00 litres vitecous china low level flushing cistern with a pair of C.I or mild steel brackets,complete with fittings such as lead valve less syphon 15mm nominal size bras ball valve with polythene float, C,P brass handle, unions and couplings for connections with inlet,outlet and over flow pipes 40mm dia C.P flush band including cutting holes in walls and making good the same and connectiong the flush band with cistern and closet (overflow pipe to be measured and paid for separately).including carriage of material in all leads and lifts (Make Hindware or equilant)

Surinder Singh