Establishing 2x12.5 MVA, 66/11KV Sub-Station at Kalathmadu along with construction of proposed 66kv LILO line from the existing 66kv Virajapete- Ponnampete SC line on DC towers to Proposed 66/11kV sub station at Kalathmadu for a distance of 1.925km in Virajpete Taluk, Kodagu District on Partial Turnkey basis

Nitrogen Injection fire extinguishing system-supply, erection & commissioning works etc., for above Power Transformer as per technical specification

CIRCUIT BREAKER :

SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suit...

CIRCUIT BREAKER :

SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suit...

ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling b...

ii)Upright mounting type without Earth switch LPH 6350mm.

11 kV Isolators:

11 kV isolator, Double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR conductor for capacitor bank

11 kV Isolators:

11 kV isolator, Single break 400 A, 25 KA capacity with Roaster Switch with bi-metallic terminal connector suitable for coyote ACSR Conductor for outgoing feeders.

CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per tech...

CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per tech...

11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as p...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for Drake ACSR Conductor and marshalling box etc., complete as p...

Lightning Arrestors

SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

i)60 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Sta...

ii)9kV, 10KA class station class with connector and clamp

CAPACITOR BANK of 12.1 kV, 2.9 MVAr Star Connected, Double Bank

Design, engineering, supply, erection , testing & commissioning of Capacitor Bank with internal fuses, terminal connector, Neutral CTs ...

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...

Fabrication, galvanising and supply of Mild Steel of Station structures, Mounting Structures, Tubular Lightning Mast & Station Yard Light Structure (excluding Bolts & nuts)-Total Weight

Supply of galvanised Bolts & Nuts for Station structures , Mounting Structures,Tubular Lightning Mast & Station Yard Light Structure -Total Weight

Note:(i) Rate to be quoted on per t Basis.

11 kV ODS and take off structure :

Supplying of Double pole structure with 9.5 Mts. RCC poles,145Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixing...

BUS BAR FORMATION :

Earth wire 7/3.15mm

Rigid Bus with Taps & Clamps :

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) of following nominal diameter

b) 63mm size connecting isolator to vertical tap

ii)Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.

iii) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side

b) Expansion Type

iv) Corona Bell suitable for Aluminium Pipe of size 75mm on 66kV

v) End cap suitable for Aluminium Pipe of size 63mm on 66kV

i) Post insulators- Cylindrical solid core as per technical Specification

Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.

1.C Type wedge connector suitable for Drake-Coyote

2.Post insulator clamp suitable for Single Drake ACSR and 66kV solid core insulator

Auxiliary Transformer:

Station Auxiliary Transformer with Copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....

Double Pole Structure along with 9.5 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 10kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt &...

A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G

MCB 16A + 1 O/G of 100A...

LT Power Cable:1.1 kV Class Armoured Aluminium Cable with glands/lugs/ferrules :

a) 1.1 kV PVC Insulated 4X95 sq.mm Aluminium cable with glands / lugs / ferrules

STATION BATTERY:

110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per technical specification

BATTERY CHARGER :

Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery charger as per technical specification.

DC Distribution Panel (Indoor)

as per technical specification comprising of earth fault indicator, indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete...

Copper control cables:

1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per technical specificaions

i) 19 Core x 2.5 Sq.mm.

ii)10 Core x 2.5 Sq.mm.

iii) 4 Core x 6.0 Sq.mm.

iv) 4 Core x 2.5 Sq.mm.

v) 2 Core x 2.5 Sq.mm.

vi) 2 Core x 6 Sq.mm.

vii)4CoreX25 sq.mm

viii)4CoreX10 sq.mm

11kV, XLPE Insulated UG Cable as per Technical Specification

a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 66/11 kV transformers to 11kV switchgear).

b) 3X240 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)

c)3X95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)

d)ia Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)ib)Cable Termination kits suitable for 95Sq. mm 3 Core as per techincal specification.

d)iia) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.

d) iib) Cable Termination kits suitable for 240Sq. mm 3 Core as per techincal specification.

e)iiia) Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

e) iiib)Cable Termination kits suitable for 1000 sq mm Single Core as per techincal specification.

Equipments required for establing SCADA Communication as per KPTCL Specification

Note:1. Satellite communication required will be arranged by SLDC

a. Remote Terminal Unit (RTU) 64 (I/O) Port

b.Data Concentrator Unit (DCU)

c.2kVA online UPS (230V AC 1 phase 50Hz)

i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core

ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core

iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core

iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core

v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.

vi) supply cables-1C x 32 Sq mm multistrand for battery conforming to KPTCL specification

Fire Fighting Equipments with necessary Mounting Stands

a. i. Mechanical Foam type extinguisher 50 Ltr. capacity

ii. Mechanical Foam type extinguisher 9 Ltr. capacity

b. Water type (gas pressure type) 9 Ltr. capacity

c. Carbon di-oxide type 4.5 kg Capacity

d.i Sand type G.I Buckets 15 Ltr. Capacity

ii. Steel stands for above to have 4 buckets to each stand.

MAINTENANCE TOOLS AND PLANTS

1.Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2. Telescopic ladder Aluminium 6 Mtr. Height

3.Ring spanner set- 12Nos per Set

4.Tube spanner set- 12Nos per Set

5. Pipe wrench 24 inch

6. Pipe wrench 18 inch.

7. Hydraulic Crimping tools up to 1000 sqmm

8.Rubber hand gloves (15 kV tested)

9.Rechargeable 5W LED Hand Torch

10.Insulated cutting plier

i. 12 inch size

11.Insulated cutting plier

ii. 8 inch size

12.Line live tester

13.Screw driver 18"

14.Screw driver 12"

15. Hammer 8 lbs

16. Hammer 2 lbs

17. Chain pulley block 5 ton cap

18.Hydolic jack 5T capacity

19.Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. height.

21. Box spanners- 12Nos per Set

22.Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23.Insulation Tester Digital Type (megger) 2.5kV - 5 kV

24.Insulation megger 500 V

25.SF-6 Gas leak detector

26.Multimeter electromechanical

27.Multimeter Electronic

29.DC Voltmeter range -5V to + 5V

30.Hydrometer syringe suitable for vent holes

31.Specific gravity correction chart

32.wall mounting type holder for Hydrometer

33.Thermometer with wall mounting holder

34.Rubber appron

36.Protective goggle

37.Acid resisting jars (4 pint capacity)

38. Rubber shoes knee height

39. Glass funnel

40. Grounding sticks extendable upto 18 ft : 3 nos. of

each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set)

Miscellaneous items like rubber mats, first aid box, danger board, shock treatment charts, water filter door locks, fixograph, Sub station name board and other sundry items (size/capacities to be got ...

2.First aid box.

3.Shock treatment charts, hard board, liminated with coloured pictures & literature both in Kannada & English.

4. Water filter / Water purifier : Wall mounting type (Aqua-guard type).

5. Sub-station name board duly painted as per specification including erection & Civil Works

6. Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

7.Door locks 7 levers (Navtal make) (Sizes and capacities to be got approved)

8. Danger board ( prohibited ) with support structure including fixing in front of the gate

9. Equipments name plates and earthing name plates including fixing at outdoor yard

Furniture for control room, staff and maintenance, staff, godrej / featherlite / chandan make :

1.Steel Almirahs 6 1/2 feet

2.Steel Almirahs 6 1/2 feet with glass panel doors.

3.Officer's tables

4.Steel slotted angle rack (big)

5.Steel slotted angle rack (small)

6.Steel dust bins

7.Executive Revolving chairs

8.S type arm chairs

9.Steel folding chairs

Station yard lighting (outdoor):

i)Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProo...

ii)Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded p...

iii)1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per specificaions

2 Core x6 Sq.mm.

Station Erection

Power Transformers: 12.5MVA, 66/11kV TRANSFORMER.

66/11KV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, ...

CIRCUIT BREAKER :

SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suit...

CIRCUIT BREAKER :

SF-6 Circuit Breaker with spring/semi-pneumatic/ pneumatic type operating mechanism including mounting structure arrangements with rigid bi-metallic terminal connector complete suit...

ISOLATORS : 66 kV, 1250 A, 40 kA double break manually operated isolators with solid core Cylindrical post insulator, terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube, marshalling b...

ii)Upright mounting type without Earth switch. LPH 6350mm.

11 kV Isolators:

11 kV isolator, Double break 400 A, 25 KA capacity with rigid bi-metallic terminal connector suitable for coyote ACSR Conductor for Capacitor Bank

11 kV Isolators:

11 kV isolator, Single break 400 A, 25 KA capacity with Roaster Switch with bi-metallic terminal connector suitable for coyote ACSR for outgoing feeders

CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per tech...

CURRENT TRANSFORMER : Oil filled Current Transformer 0.2s class with rigid bimetalic terminal connector suitable for Drake ACSR conductor/ 63mm Al. tube with marshalling box etc., complete as per tech...

11 kV class, 25 KA, NCT of ratio 1200-800/1-1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos of Copper flats as ...

VOLTAGE TRANSFORMER :

VOLTAGE TRANSFORMER Single phase, oil filled, outdoor type VT with rigid bimetallic terminal connector suitable for 50mm Al. tube as with marshalling box etc., complete as per ...

SURGE ARRESTOR (Porcelain Housing) metal oxide, Gapless type, as per Technical Specification:

i)60 kV, 10KA Metal Oxide with surge counter

Arrestor class : Discharge Class 3 (Station Medium

ii)9kV, 10KA class

Control and Relay Panel:

Simplex 110 V DC compatible to SCADA complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformit...

Control and Relay Panel:

implex 110 V DC compatible to SCADA complete as per technical specification

Note: 1. All the C&R Panels and associated panels shall be of one and the same make for uniformity...

Erection of Station structure, Mounting Structures , Lightning Mast & Station Yard Light Structure(including Bolts & nuts) as per the directions of site Engineer -Total Weight

Note:(i) Rate to be quot...

C) 11 kV ODS and take off structure :

Erection of Double pole structure with 9.5Mts. RCC poles, 145Kg WL and with provision for fixing 11 kV 400 A Roaster single break isolators & provision for fixi...

Formation of Main/ Cross Bus with Single Drake for 66 kV Bay

Note: Shall include Installing insulator strings complete with necessary Hardwares, stringing of the conductor etc.,

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS ...

Erection of Tubular bus including fixing of clamp, connector jumper, corona ring etc, Complete as per instruction of Engineer in Charge

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS ...

i) Post insulators- Cylindrical solid core as per technical Specification

Solid Core Bus Post Insulator 66 kV class, 1Unit/stack.

Auxiliary Transformer:

Station Auxiliary Transformer with copper winding & oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn11, off load tap changer (with 5 taps) with step voltage of 2....

Double Pole Structure along with 9 mtr RCC pole, DP Set, H Frame, 11kV 400A Double break isolator and 9kV, 5kA surge arrestor (3 Nos), HG Fuse Unit,Angle for fixing HG fuse unit( pole clamps bolt & nu...

A) LTAC Panel (indoor),415 V as per technical specification comprising of voltmeter and ammeter, 1No. I/C MCCB 200A + 2 nos. 3 Phase 63A O/G SFU + 2 nos. 3 Phase 32A O/G SFU + 14 O/G SFU, 6 nos. 3 Pha...

B) A.C. Distribution Box (Outdoor) :

AC Distribution Box Single front (Outdoor type) 6 Terminal, one I/C of 100A MCCB 20kA + 6 O/G MCB 16A + 1 O/G of 100A, HRC fuse, complete as per technical specifi...

STATION BATTERY:

110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type as per specification

BATTERY CHARGER :

Battery charger suitable for 110 V, 200 AH, Battery set Plante/Grid/Nickel Cadmium Type with float cum booster type battery chargeras per specification.

DC Distribution Panel (Indoor) as per technical

specification comprising of earth fault indicator,indication circuit for AC mains failure, 1 no. 100A SFU for I/C + 12 nos. 32A SFU for O/G, complete

1.1 kV Class Armoured Aluminium Cable with

glands/lugs/ferrules :

a) 1.1 kV PVC Insulated 95 sq.mm Aluminium cable 4 core with glands / lugs / ferrules

Laying of 1.1kV class PVC insulated Copper Control Cable with Lugs / Ferrules, Glands as per specificaions

i) 19 Core x 2.5 Sq.mm.

ii)10 Core x 2.5 Sq.mm.

iii) 4 Core x 6.0 Sq.mm.

iv) 4 Core x 2.5 Sq.mm.

v) 2 Core x 2.5 Sq.mm.

vi) 2 Core x 6 Sq.mm.

Note: added 960 Mtrs for Station Yard Lighting at Proposed 66/11kV S/s at Kalathmadu.

vii)4CoreX25 sq.mm

viii)4CoreX10 sq.mm

Laying of Scada Cable along with glands/lugs/ferrules :

i)Current Cables - copper core with c/s 4.0sqmm multistrand 4 core

ii)Voltage Cables-Copper core with c/s 2.5sqmm multistrand 4core

iii) Signal cables- armoured copper core with c/s 0.5sqmm multistrand 10core

iv)Control cables - copper core with c/s 1.5sqmm multistrand 10core

v)supply cables- Copper core with c/s 4.0sqmm multistrand 3core for AC input to UPS and UPS to RTU, conforming to KPTCL specfications.

vi) supply cables-1C x 32 Sq mm multistrand for battery conforming to KPTCL specification

11kV Switchgear:11kV, 25KA, 500 MVA MCVCB switchgear 1600 A for incomer and 1250 A for feeders Out door type comprising of 2IC+12F+1BC+2CB+1AP (Remote annunciation cum Control panel) with CTs & PT...

Laying of 11kV, XLPE Insulated UG Cable as per Technical Specification

a) 11kV Single Core, 1000 sq.mm Aluminium cable To be run from 66/11 kV transformers to 11kV switchgear).

b) 3X240 sq.mm Aluminium cable (To be run from 11 kV switchgear to 11kV take off DP structure)

c)3 X95 Sq.mm Aluminium Cable( To be Run from 11kV Switchgear to Auxiliary Transformer)

d) Fixing of Termination kit/Pothead suitable for following sizes as per techincal specification.Heat Shrikable Type Cable Termination Suitable for

ia) 95Sq. mm 3 Core Indoor

ib) 95Sq. mm 3 Core Outdoor

iia) 240Sq. mm 3 Core Indoor

iib)240Sq. mm 3 CoreOutdoor

iiia)1000 sq mm Single Core Indoor

iiib) 1000 sq mm Single Core Outdoor

Equipments required for establing SCADA Communication as per KPTCL Specification

Note: Satellite communication required will be arranged by SLDC

a. Site survey, wiring, installation, testing and commi...

b. Site survey, wiring, installation, testing and commissioning of DCU (DCU installation to be done in RTU panel)

c.Wiring, Installation Testing and commissioning of UPS with batteries & cables

Integration of RTU, DCU and UPS with field equipments

Earth mat formation:

Supplying, Laying and welding of M.S.Flats 75x12 mm, applying ACB paint to welded portion and covering with earth.

Supplying and Grounding of Equipment with G.I.Flat 75x12mm and connecting Equipment to the earth mat/ground pit. Each point of earthing with all formation works like bending, twisting, drilling of h...

Supplying and Providing 40mm dia M.S.Rod 1.075 m long earthmat spikes including heating, bending top 50mm overlap flattening and making spike edge at the ground level and welding the rod with ground ...

Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75mtrs long with 2 part clamp out of G.I.Flat 50x6 mm continuously welded around the pipe using cast iron welding elec...

Supplying and fixing of 450mm diax 450mm height 1.5" to 2" hume pipe collars for earth pits including all lead and lifts etc.,

Providing Deep Bore earthing:

Sinking bore of 150mm clear dia using fast rig including fixing of 40 mm dia MS Rod, including jointing the pipes as per KPTCL standard and providing sodium bentonite tr...

40 mm dia MS rod (5 mtr x20No.=100Rmtr)

Bentonite clay for Treatment of MS flat,MS rod and CI pipe electrodes with sodium bentonite clay ( deep bore 20x45kg)

Cost of GI flat for joining two rods by welding to obtain continuous length

Mandatory Spares

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB

SF6 Gas (40% of total gas Qty. of each Sub-Station) Sub-Station

Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)

Terminal Connector (For one Complete Isolator for 72.5KV Class)

Terminal Pad (For one Complete Isolator for 72.5KV Class)

Grand Total weight of Tower parts- High Tensile Steel

Note: (i)Rate to be quoted on per t Basis.

(ii) For detailed quantity breakup refer techno-commercial sheet

Grand Total weight of Tower parts- Mild Steel

Note:(i) Rate to be quoted on per t Basis.

(ii) For detailed quantity breakup refer techno-commercial sheet.

Grand Total weight of Bolts & Nuts

Note:(i) Rate to be quoted on per t Basis

(ii) For detailed quantity breakup refer techno-commercial sheet

Tower Accessories

1.Number Plates

2.Danger Boards

3.Circuit Plate

4.Phase Plate (set of 6 Nos.)

5.Earth bond of 450mm Long

i) Coyote ACSR Conductor with 1.5% sag

ii)7/3.15 mm Ground Conductor with 1.5% sag

Insulators strings suitable for COYOTE ACSR CONDUCTOR

For 66kV Line as per technical specifications:

NOTE: All the Insulator strings quoted by the bidder shall be of the same type i.e. all the Insul...

Insulator Hardware:

A.Single Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 90kN insulator to suit Coyote ACSR

B.Double Tension clamp with hard ware and arcing horn suitable for 2x5nos. of 90kN insulator to suit Coyote ACSR

Accessories for Coyote Conductor:

2.Repair sleeves

4.Vibration dampers

Accessories for 7/3.15mm Earthwire:

2.Repair sleeves

4.Single tension clamps (Bolted type)

Check survey to be conducted during construction stage: Conducting detailed check survey along the approved route

duly following the route alignment, GPS Co-ordinates, submission of detailed line sche...

Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical,horizontal and ground clearnace o...

Installing insulator strings complete with necessary Hardwares, Installing and stringing of conductor/Earthwire including fixing of their accessories, etc.,

a. Coyote ACSR conductor-66kV

b. Earth wire-7/3.15mm

Erection of 110kV Transmision Line Towers :

Sorting of tower parts (made of fabricated angle iron)

Note:(i) Rate to be quoted on per t Basis

(ii) For detailed quantity breakup refer techno-commercial...

Setting up of stub templates & aligning dismantling & transportation of templates from one location to another

Assembling & Erection of towers including tightening of bolts & nuts including loading, unloading at stores & site (including weight of stubs)

Note:(i) Rate to be quoted on per t Basis

(ii) For detail...

Tack welding of bolts & nuts

Fixing Tower accessories:

Phase plates RYB (3 Nos. per set)

Tower accessories:

a. Supplying and fixing GI angle 45 x 45 X 5mm, 1Mtr length with cleats, bolts nuts as per specification and fixing above 0.5mtr length each at inner and outer surface of tower to ...

Supplying and fixing Barbed wire as per technical specifications

c.Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metrelong, salt, charcoal, including excavation cha...

Dismantling of existing super structure / tower material:

Dismantling of existing 66kV DC Towers ( DA Type 01 No)

Note : 1) The rates quoted for releasing shall also include the charges for loading, ...

Releasing & Restringing of Coyote Conductor in the existing line

[involving about one span after replacement of tower (Coyote)(200)*3Nos.]

Releasing & Restringing of Existing Ground Wire

[in the existing line involving about one span after replacement of tower.(66 KV)]

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ra...

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine agg...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in super structure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) in...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing and fixing 10 mm thick acid and or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance plus or minus 1mm), with wall thickness 2.0 mm (plus or minus 0.2 mm), ...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5 mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work ...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Oval shape...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing PTMT stop cock of approved quality and colour 15 mm nominal bore, 86 mm long, weighing not less than 88 g

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing, supplying to work site,Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications,with testing of as per instructions of engin...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest a...

PRESSURE GAUGE :

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

Control Panel BOARD-A:

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analo...

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16...

GALVANISED MILD STEEL TUBES:

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one e...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including suppl...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Earthing: Providing and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal pro...

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using...

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.32A DP Switch

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. TV/ Telephone Socket

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 32-40 Amps 4 pole

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board.

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...

Providing M-Sand : Supplying and filling in plinth, foundations / UG cable work with approved M-sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, la...

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947 - 125Amps

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying of recess mounting non integrated type LED down light 36W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 mtrs long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / ...

Fixing all types and all capacities of fluorescent /false ceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required N...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...