Renovation work including misc civil interior of renovation work room no 224 at Bapu Bhawan Lko

Dismantling tile work in floors and roofs For thickness of tiles 10 mm to 25 mm laid in cement mortar including stacking material within 50 metres lead.

Brick work with Cement mortar 1:4 (1 cement : 4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Half brick masonry with Cement mortar 1:4 (1 cement :4 coarse sand) & common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up ton floor V level,the work included cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

12 mm cement plaster of mix :1:6 (1 cement: 6 Course sand). including cost of all labour,material T&P required for proper completion of work as Direction by Engineer Incharge.

Repairs to plaster With cement mortar 1:4 (1cement: 4 coarse sand) of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.size of tiles 1200x1200mm.

Providing & fixing in position Phenol bonded Bamboowood flooring with planks of sizes 14mm thick, minimum 1800mm length and minimum 100 mm wide, in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded polyethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboowood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of the Engineer in-charge.

Providing and fixing 15 mm thick false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge.

Providing& making & fixing of Wall Panneling as per drawing from claded with 12mm water proof & Fire Retardent ply & final surface to be finised with 6 mm thick MDF & PU polished in required color/wooden shade( complete as per the approved desin all complete as per drawing, specification and direction as approved by E/I.