CA NO. GE (AF)/SGR-33/2024-25 REPAIR TO DRAIN, PATH, CULVERT, FENCING AND MISC WORKS AT DOMESTIC AREA UNDER GE (AF) SRINAGAR.

Amount

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., complete all as specified and directed.

M&L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

M&L for Brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick wall built in CM 1:4, complete all as specified and directed.

M&L for Stone Masonry walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as speciified and directed

All as per Ser item No 4.00 here in above but except stone.

M&L for cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in copings, lintels up to 1.5 m span, apex stones, bed plates, kerbs / benching to manhole etc including weathering, slightly rounded or chamfered angles and throating, complete all as speciified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick cement plastering on fair faces in CM 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement but with using water proofing compound upto 12m height including taking down old plaster, complete all as specified and directed. (Note : WPC shall be measured and paid separately.)

Supply only water proofing compound.

M&L for 15 mm thick cement plastering in CM 1:6 on other than fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement upto triple storey height including taking down old plaster, complete all as specified and directed.

Preperation of new plaster surface of walls and applying three coats of white wash, complete all as specified and directed

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including removal of debries out of defence land, complete all as specified and directed.

M&L for Hard core of Broken stone Boulders of gauge n.exc 63mm deposited spread & levelled in layers n exc 15cm watered and rammed to a true surface thickness, complete all as specified and directed.

M&L for 75 mm thick cement concrete, 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) as in sub base, complete all as spciified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for Plain cement concrete tiles 30 cm x 30cm x 25 mm thick with grey cement and no pigment machine pressed, set joined and pointed in neat cement slurry in roofs over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for vitrified parking tiles 8-10mm thick heavy duty exterior grade texured finished of size 400X400 mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L 18-20mm thick granite (of any type) (table rubbed and polished) machine cut, in steps, columns, jambs, pillasrs, window cill, cooking platform, walls and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing unserviceable granite, complete all as specified and directed.

M&L for kerb stone of M-25 grade cement concrete, Factory made, in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for cement concrete, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed.

M&L for 100mm thick Cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as flooring and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Glass dividing strips 38mm wide and 3mm thick inserted and fixed in position complete all as speciified and directed

M&L for 40 mm thick PCC ,1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in floor finishing cement concrete surface even and smooth with out using extra cement, complete all as speciified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for Pre-cast RCC, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregates) as in cover slab for drain/ soakage well / manhole and similar works supported on walls and set in cement mortar 1:4, complete all as specified and directed. (Note:- Reinforcement steel will be measured & paid separately)

M&L for TMT steel bars 8 mm to 10 mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as speciified and directed.

Dismantling of old chain link fencing including flat iron, line wire, complete all as specified and directed.

Dismantling of RCC posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises, complete all as specified and directed.

Dismantling of RCC posts or struts embedded in natural ground any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises, complete all as specified and directed.

Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil, complete all as speciified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for surface channel, drain and RCC post etc including necessary form work, complete all as specified and directed.

S&F MS 10 mm dia round bar Fe-410-w (grade E-250) quality-A as line wire for holding chain link mesh, complete all as specified and as directed.

M&L for MS flat iron clamp, Angle posts and struts in fencing cutting tops to shape as directed, drilling holes, notching for wire etc. Flat iron fillets (For securing chain link fencing etc) and similar work conforming to Fe-410-0, complete all as specified and directed.

Supply only MS galvanisd chain link fencing of size 50x75mm with nominal dia of mesh wire 4mm, complete all as specified and directed

Fixing only chain link fencing of any type fixed to RCC / steel post with mild steel flat & nut bolt etc, complete all as speciified and directed. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.

S&F mild steel bolts screw (machine made) with hexagonal or squre head at one end and scrw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 05 to10mm, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Framed work such as ornamental and intricate design grills, gratings, etc. with ends of bars shouldered and /or riveted, welding or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Preparation of newly steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc. (each line of wire to be measured), complete all as specified and directed.

Restringing and rescrubbing of old Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and making good staple etc. (each line of wire to be measured), complete all as specified and directed.

Deduction to be made from BOQ for Schedule 'A' Part-II (Credit Schedule from dismentling/taking down items) worth Rs 71,420.00 during AOC. Note :- Tenderers shall not quote for this Schedule.

M/S FAROOQ AND SONS (BID ID -3076670)

M/S NAIK CONSTRUCTION COMPANY (BID ID -3077329)

M/S SA INFRATECH (BID ID -3077251)

M/S Abdul Ahad Rather (BID ID -3075595)

M/S AIJAZ ENTERPRISES (BID ID -3074026)

M/S GHULAM MOHAMMAD AND CO. (BID ID -3077152)

M/S M.R. Construction (BID ID -3077769)

M/S JAN BUILDERS (BID ID -3075039)

M/S WANI AND SONS (BID ID -3082251)

M/S GULAM AHMAD ABDUL SAMAD (BID ID -3080280)

M/S HAJI ZAHOOR HUSSAIN GANIE (BID ID -3076666)

M/S LUCKY BUILDERS (BID ID -3077519)

M/S TARIQ AHMAD SHEIKH (BID ID -3078535)