NIT No GE/ND-68/2024-25

Amount

S&F ARCHNER LED type post top light 45 watts, pressure cast aluminium PU painted housing with casted aluminium heat sink with optical grade PC diffuser, IP- 65 protection, input voltage 140-270 Volt, 50 HZ , low power white LEDs with 50000 Burning hours, better heat dissipation,high efficient constant current electronic driver provided with high high voltage, open and short circuit protection, external surge protection 10 KV etc complete suitable for 76 mm outer dia pole including flexible 3 core 1.5 sqmm copper connecting cable from box to fitting etc complete all as specified and directed by Engr-In-Charge. Make: Bajaj Cat pt No BGCPNP 45 W LED WW or equivalent of make as specified in PS.

M&L for supply, erection, testing & commissioning of 3.0 metre hight, top dia 76mm, bottom dia 114mm made out of 3 mm thick galvanized steel sheet hot dip octagonal post top light pole with one ERW welding joint including window/door opening at 600mm above ground level with one MCB SP 6 Amps & TPN connector block 32 Amps (door size 300mm X 80 mm) having flash cover including necessary earth work (excavation, returning filling & removal) in soft/loose soil, RCC (grade M20) in foundation as per recommended design of manufacturer considering safe soil bearing capacity at site including suitable size & minimum 04 Nos foundation bolts of minimum dia 16 mm & 450 mm long "J"-type alongwith nuts, washers, anchor plates and templates, 50 mm dia PVC pipe in foundation for entering cable and taking down of old U/S post top pole any height/type complete all as specified and directed. The foundation details shall be as under:- (a) RCC foundation size below GL will be 300 mm x 300 mm x 600 mm (depth) (minimum) and above GL shall be 300 mm high of same section. (b) Main reinforcement in RCC shall be 20 mm dia 8 Nos TMT steel bars in vertical and stirrups of 8 mm dia @ 190 mm c/c. (c) Base plate and anchoring plate shall be of minimum size 200 x 200 x 10 mm thick. (d) RCC (grade M20) in foundation. (e) Anchoring bolts shall be of "J"-type 450 mm long and minimum 16 mm dia. Make: Bajaj Cat Pt No. BJPL-03 or equivalent in Havells/Philips.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cable 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm X 4 core complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 metre in depth for laying of LT under ground cable complete all as specified and directed.

M&L for Best quality, locally available, sub class ‘B’ bricks (Old Size) for cable protection cover, laid flat and dry in trenches over the cable , perpendicular to the direction of cable complete all as specified and as directed by Engineer-in-Charge.

M&L for sand cushioning , with dry and clean sand, over and under the under ground cables in trenches, ducts for cable protection including consolidation, 80mm thick to the authorized width as per SSR Part-I before laying of cable and 150mm thick after laying of cable complete all as specified and directed.

Returning filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated materials to a distance not exec. 50 mtr and deposing where directed at a level not exec 1.5 mtr above the starting point complete all as specified and directed.

S&F in replacement of ARCHNER LED type post top light 45 watts, pressure cast aluminium PU painted housing with casted aluminium heat sink with optical grade PC diffuser, IP- 65 protection, input voltage 140-270 Volt, 50 HZ , low power white LEDs with 50000 Burning hours, better heat dissipation,high efficient constant current electronic driver provided with high high voltage,open and short circuit protection,external surge protection 10 KV etc complete suitable for 76 mm outer dia pole including flexible 3 core 1.5 sqmm copper connecting cable from box to fitting etc complete all as specified and directed by Engr-In-Charge. Make: Bajaj Cat pt No BGCPNP 45 W LED WW or equivalent of make as specified in PS.

M&L for supply, erection, testing & commissioning of 3.0 metre hight, top dia 76mm,bottom dia 114mm made out of 3 mm thick galvanized steel sheet hot dip octagonal post top light pole with one ERW welding joint including window/door opening at 600mm above ground level with one MCB SP 6 Amps & TPN connector block 32 Amps (door size 300mm X 80 mm) having flash cover including necessary earth work (excavation, returning filling & removal) in soft/loose soil, RCC (grade M20) in foundation as per recommended design of manufacturer considering safe soil bearing capacity at site including suitable size & minimum 04 Nos foundation bolts of minimum dia 16 mm & 450 mm long "J"-type alongwith nuts, washers, anchor plates and templates, 50 mm dia PVC pipe in foundation for entering cable and taking down of old U/S post top pole any height/type complete all as specified and directed. The foundation details shall be as under:- (a) RCC foundation size below GL will be 300 mm x 300 mm x 600 mm (depth) (minimum) and above GL shall be 300 mm high of same section. (b) Main reinforcement in RCC shall be 20 mm dia 8 Nos TMT steel bars in vertical and stirrups of 8 mm dia @ 190 mm c/c. (c) Base plate and anchoring plate shall be of minimum size 200 x 200 x 10 mm thick. (d) RCC (grade M20) in foundation. (e) Anchoring bolts shall be of "J"-type 450 mm long and minimum 16 mm dia. Make: Bajaj Cat Part No. BJPL-03 of Bajaj or equivalent in Havells/Philips.

SANJEEV ENTERPRISES (BID ID -3099664)

Surjit and Sons (BID ID -3100267)

NEERU ELECTRICALS (BID ID -3100649)

M/s Dhapola Elevator and Engineering (BID ID -3100743)

Shiv Enterprises (BID ID -3098747)

SANJEEV ENTERPRISES (BID ID -3097825)

RUCHIKA ENGG.WORKS (BID ID -3099360)

Tanveer Associates (BID ID -3100220)