Providing Interior Painting in DFRP building at IGCAR, Kalpakkam.

Amount

Providing and applying painting Two coats at all levels with premium Plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty, scaffolding complete all as per specifications and as directed by the Engineer-in-charge.

Providing and Painting with Epoxy paint (two or more coats) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, etc. complete all as per manufacturers Technical Data and as directed at site to achieve 200micron Dry film thickness (50 Micron Primer coat and 150micron finishing Coat). (Contractor has to provide Elcometer sampling sheets etc. at his cost for testing film thickness)

Providing and fixing double Tubular scaffolding system using H-Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40mm dia M.S. tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in-charge. The elevation area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

Providing and applying painting Two coats on wood work and other required internal surface at all levels with Synthetic enamel paint (Asian or approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, scaffolding complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and applying Two coats of Polyuerthane paint on steel surface and other required internal surface at all levels with Apcothane CF 675 PU 240 Nickel Grey paint of ‘Asian’ or approved equivalent brand, colour and manufacturer, to give an even shade including one under coat of suitable Epoxy/PU primer, preparation of the surfaces complete all as per specification and as directed by the Engineer-in-Charge.

G.KAMLAKAR