SPECIAL REPAIR TO BLDG NO P1 MAIN LAB AND T4 UNDER GE GUWAHATI

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade (double charge, premium quality) 10 mm thick (square/ rectangular) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed complete all as specified and directed .

M&L Glazed, ceramic, coloured tiles (first quality) of size 300mmx450mm/600mmx 300mmx7mm thick as in vertical surfaces, such as skirting, dado, etc, set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and directed

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and removing rubbish off the premises complete all as directed.

M & L for half brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removing debris and rubbish off the premises complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2 (1:2:4 ) 40 mm graded aggregate as in path/paving etc surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster/cement mud plaster on brick walls etc, including racking out joints, hacking for key, scrubbing down with water etc and removing debris and rubbish off the premises complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified and as directed.

M & L for complete removal of existing treatment from decorated surfaces of wall etc of any description and applying two coats exterior emulsion paint over a coat of exterior white cement based wall care putty ( minimum 1.5 mm thick ) and suitable primer as per manufacturer instruction complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered or unplastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of primer over a coat of white cement based wall care putty minimum(1.5mm thick) complete as specified and directed.

M & L for preparation of new plaster surfaces of wall etc of any description and applying two coats exterior emulsion paint over a coat of exterior white cement based wall care putty ( minimum 1.5 mm thick ) and suitable primer as per manufacturer instruction complete all as specified and directed.

M&L for preparation of new plaster surface on ceiling and applying two coats of distemper oil-emulsion over a coat of primer over a coat of white cement based wall care putty minimum(1.5mm thick) complete as specified and directed.

M&L for preparation of new plaster surface on wall and applying two coats of distemper oil-emulsion over a coat of primer over a coat of white cement based wall care putty minimum(1.5mm thick) complete as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm, bowl size 410mm x 330mm x160mm including Waste coupling in repair of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) 40 mm bore dia complete all as specified and directed. Make Nirali/Blue Star/Prayag

Supply & Fixing Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting, PVC waste pipe, a pair cast iron/angle iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

S&F in repairs long body bib tap 15 mm cast copper alloy Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or from brass ferrule complete all as specified and directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, chromium plated screwed for 15 mm bore complete all as specified and as directed.

S&F in repair angle stop cock 15 mm bore, cast copper alloy, chromium plated with round operating knob screwed down for iron pipe or brass ferrule complete all as specified and as directed.

S&F in repair 15mm dia PVC connection pipe 450 mm with PTMT nuts complete all as specified and as directed. Make : Prayag/Polytuf

S&F in repair 32mm waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms).Make : Prayag/Polytuf

Taking up or down steel tubing and connection 20 mm bore, including cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supply & Fixing Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons, cooking platforms etc laid, bedded and pointed in any mortar and removing debris and rubbish off the premises complete all as specified and directed.

M&L for Granite work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like set with neat cement slurry over and including cement mortar (1:4) screed bed 15mm thick including pointing in white cement with admixture of pigment to match with granite shade, complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails, complete all as specified and as directed.

M&L Prelaminated particle board, 18/19 mm thick, interior grade, bonded with phenol formaldehyde synthetic resin, confirming to IS: 12823 grade-I, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/nails to timber frame work as in cup board etc complete all as specified and directed. Make : Greenply Industries Ltd (Ply & Board division)/Kitply/Century/Archid Ply/National Plywood Inds Pvt. Ltd

Taking down PVC eaves gutter and rain water pipe/waste water pipe (any size or description) including all fixtures, heads, shoes, bends, swan necks, etc including stacked at site and also removal from site complete all as specified and directed by Eng-In-Charge.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor/trenches complete all as specified and directed by Eng-In-Charge.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floor/trenches complete all as specified and directed by Eng-In-Charge.

S&F 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) bends of any radius complete all as specified and as directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided, complete all as specified and directed.

M & L for RCC (Nominal Mix) grade typeA1, 1:1.5:3 (20mm graded stone aggregate) as in slab supported on walls, beams, columns, in floors, roofs, landings, balconies, canopies, desk slabs, and in shelves and the like etc, complete all as specified and directed

Formwork to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work (horizontal or sloping) for rough finished surfaces, complete all as specified and as directed.

Use and waste for form work to edge of concrete flats not exceeding 20 cm wide and side of RCC/PCC and similar works for rough finished surface complete all as specified and as directed.

M&L for mild steel bars 10mm dia and over TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed.

All as per item No 40 above but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders complete all as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantling complete all as directed.

Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel section (Galvanized @120 grams, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and cross 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from trusses/ceiling using suitable suspension arrangement as per manufacturers instructions/literature, GI adjustable wire of 4mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-Charge.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames of doors/windows/ventilators and partitions with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including making provision for fixing of fittings wherever required including the cost of other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, C.P.brass/stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for door shutters with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required and standard aluminium fittings like handles, door bolts and other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Door closer, mortise lock, door stopper, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for windows( any type) and ventilator shutters with extruded built up standard sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, including providing and fixing hinges/pivots/sliding track and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required and standard aluminium fittings like handles, bolts, stays, closing mechanisms and other required fittings etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing /panelling, C.P.brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Notes:- 1. The weight shall be of all aluminium components and fittings except the gaskets. 2. Glazing, wire mesh and panelling to be paid for separately and all other fittings shall be deemed to be included in the rate quoted.)

S & F Aluminium decorative grill ( design and size approved by GE) fixed to window including frame works complete all as specified and directed by Engr-in-Charge.

S&F as in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified .

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified .

M/L for Venetian Blind for window horizontal or vertical with laminated leafs metal type including all accessories complete all as directed. Make - Vista or equivalent as approved by GE.

M&L Prelaminated particle board, 12 mm thick, interior grade, bonded with phenol formaldehyde synthetic resin, confirming to IS: 12823 grade-I, prelaminated both sides with decorative choice laminations fixed with necessary clips and other accessories fixed to aluminium/timber framework etc, complete all as specified and directed. Make : Greenply Industries Ltd (Ply & Board division)/Kitply/Century/Archid Ply/National Plywood Inds Pvt. Ltd

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:4 complete as specified and directed.

M&L for Rendering 15 mm thick in two layers (10mm + 5mm) externally in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @200ml/50kg of cement on top layer of 5mm thick as per manufacturer’s instructions and finishing the surfaces fair and even without using extra cement complete (Note : WPC measured and paid separately as ‘Supply only’)

Supply only liquid water proofing compound

S&F for MS frame work ( Fe-290 Gde E-165) such as grills grating etc, with ends of bar shouldered and or riveted, or forged into spikes framed guard bars and similar work all as specified and directed .

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital, Similar pattern roof covering, complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams clear span above 4m to 8mtr etc complete all as specified and as directed.

Dismantling posts or struts embedded in concrete (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as directed.

Dismantling timber scantlings un-framed in fillets, rails, posts, rafters, purloins etc. under 40 sqcm in section complete all as directed

S&F mild steel work in tubular trusses/purlins/rafts/post etc including special shaped washer etc complete using ERW or induction butt welded tubes conform to IS 1239 complete as specified and directed.

M&L Rolled mild steel plates (plain or chequered), channels, square cut or notched (ordinary or counter sunk) forming holes , with riveted, bolted or welded attachment etc, conform to Fe-290 Gde E-165 compete as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal heads at one end and screws other end to be fitted with washes and one hexagonal nut, exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15 mm as specified and directed.

M&L preparation of new iron and steel surfaces of any description, exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

M&L PCC (1:3:6) type C-2 (using 40 mm graded aggregate) as in foundation, mass concrete for post and as similar work etc. complete all as specified and as directed .

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as coping, floor or like rounded or chamfered on edges including necessary formwork complete as specified and directed.

M&L for 75 mm thick Cement concrete type C 2, 1:3:6 (using 40 stone aggregate) in plinth protection, finished even and smooth without using extra cement, including provision of joints and filling the same with bitumen mastic complete all as specified and as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete as directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete as directed.

S&F Pressed steel frames of size 125mm x 60mm , 1.25 mm thick with one or more rebated including necessary fixing lugs, hinges, lock strike plate, etc including filling concrete PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate in hollow portion etc complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides etc complete all as directed.

M & L for 35 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F 125 mm long, Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.

M&L for 300 mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast, cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F 100 mm size Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete, fixed in repair complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (1st quality) over priming coat of pink primer complete all as specified and directed.

Material and labour for 12mm thick seamless calcium silicate POP finished ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete including two coats of oil bound distemper and including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners including suspenders, with and including ceiling section of 0.55 mm thickness having knurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and fix complete all as specified in SSR Part-I and as directed.

M&L for non-skid coloured ceramic tiles ( premium quality) of 8 to 9 mm thick ( Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles over and including 15mm thick screed bed in CM (1:4) complete as specified and directed.

All as per Item No 83 above but as in skirting including cutting titles in required size over and including 10mm thick backing coat in CM (1:4) complete as specified and directed.

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc all as directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M&L for concealed point wiring for modular fittings with 1.5 Sqmm (nominal area) PVC insulated1100 volts grade, multistranded, copper conductor, single core, unsheathed cables (FRLS quality) drawn through and including PVC conduits of suitable size but not less than 20 mm dia (medium grade) with all fittings and accessories concealed in walls/ceiling etc including cutting chases for conduits and sinking for boxes with sunken type pressed steel box , frame and cover plate suitable for mounting of modular fittings including PVC insulated and unsheathed, single core, multi-stranded, copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth and earth dolly for one light point / fan point/ one call bell point controlled by one 5 Amps one way switch complete as specified and directed. Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

All as per item No 87 above but for one 3 pin socket outlet 5 Amps, on independent board.

All as per item No 87 above but for one 3 pin socket outlet 5 Amps on same board alongwith other suitable switches.

All as per item No 87 here-in-before but point wiring for one 3/5 pin 15 Amps socket point on independent board with 4 Sqmm size PVC insulated, unsheathed, multistranded, FRLSH copper conductor cables and with 4 Sqmm PVC insulated unsheathed, single core, multistranded FRLSH copper conductor cable as earth wire complete as specified and directed.

Supply and fixing of modular switch , one way 6 amps, 1 module 240 Volts complete all as specified/directed.

Supply and fixing of modular socket 16 Amps, 3/5 pin , 2 module , 240 Volts complete all as specified and directed.

Supply & fixing of modular switch one way 16 Amps 240 Volts , 1 module complete all as specified / directed.

Supply and fixing of modular socket outlet 2/3 pin 6 Amps, 2 module , 240 volts complete all as specified/ directed.

S & F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

Supply & fix 30W 2'X2' LED luminaries with high transmitive diffuser, recess mounting (white light) with system lumen output of 110 Lumen/watt including necessary connection complete all as directed. Make Philips Cat Part No RC 380B LED 30 S 6500 G4 l60 W60 PSU OD , Model Full glow or equivalent in Havells/Crompton greaves

Supply & fix 25W LED batten with tube (white light) 4ft surface/wall mounted, extruded aluminium housing with polycarbonate diffuser & integrated electronic driver. system lumen output of 110 Lumen/watt including necessary connection complete all as directed. Make -Philips , CAT Part No. BN 021 LED25S 6500 PSU GR S1 or equivalent in Havells/Crompton greaves

Supply & fix 10W LED INTEGRA NEO surface mounted down light with white powder coated polycarbonate housing and pressure die cast heat sink having high efficiency 100 Lm/Watt (white light) including necessary connection complete all as directed. Make- HAVELLS, Model-INTEGRANEOSURFACEDLS10WLED857S or equivalent in Philips/Crompton greaves

S&F 8W LED aesthetically designed aluminium landscape luminaries for diffused with high power LED as light source . 1.0M pole height including light fitting with IP65 protection. without shade, with driver, etc. complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make- HAVELLS,BAMBOO-IP66, Model-BAMBOOBL8WLED857SSYMTOPCM(1.0M) or equivalent in Philips/Crompton

Supply and fix 10W LED decorative oval bulkhead edge lit Environment friendly, energy saving, surface mounted comprising of high brightness LEDs, complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as directed. Make- HAVELLS,ENDURA RUGBY NEO N-IP65, Model-RUGBYNEONFT10WLED860SSYMTOPC or equivalent in Philips/Crompton

M&L in repair concealed sub main wiring with 2 runs of 6 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through and including suitable size medium grade PVC conduit with fitting/accessories as required concealed in walls/ceiling etc including cutting chases for conduits and making good to disturbed surfaces including 6 Sqmm PVC insulated, unsheathed, multistranded, FRLSH copper conductor, single core cable as earth continuity wire with all fittings complete as specified and directed. Note: (i) Two runs of cable, conduit pipe and one run earth wire will be measured as one length. (ii) Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

M&L in repair concealed sub main wiring with 2 runs of 2.5 Sqmm single core, PVC insulated, unsheathed 1100 Volts grade, multi-stranded, copper conductor cables (FRLSH quality) drawn through and including suitable size medium grade PVC conduit with fitting/accessories as required concealed in walls/ceiling etc including cutting chases for conduits and making good to disturbed surfaces including 2.5 Sqmm PVC insulated, unsheathed, multistranded, FRLSH copper conductor, single core cable as earth continuity wire with all fittings complete as specified and directed. Note: (i) Two runs of cable, conduit pipe and one run earth wire will be measured as one length. (ii) Note : Quoted rate shall be inclusive for necessary chasing and cutting and making good .

Supply and fixing of MCCB TPN DB 12 way , vertical type with provision of FP as incomer and SP as outgoing , double door,IP-43 protection, isolated neutral bar, insulated busbar assembly, mechanical impact strength of IK08, fixed on wall duly grouted on wooden board/wall with electrical connection complete and fix all as specified and directed .

Supply & Fixing of modular type ceiling fan regulator step type, 2 module, 120 W complete all as specified and directed.

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps. Indoasian Cat No. ITAS0100 or equivalent in Havells/L&T

S & F sheet metal enclosure with socket plug top and MCB’s single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB, SP, 20 Amps, 240 V complete and fixed as in repairs all as specified and directed.

Supply and fixing sheet metal enclosure for MCB’s distribution board, 240 Volts, 08 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door complete and fix all as directed by the Engineer-in-Charge.

S&F MCCB,100 Amps 16kA, four pole, 415 volt adjustable all as specified and directed by Engineer-in- Charge.

Supply & fixing of MCB TPN 32 Amps 'C' Series 10 KA 415 volts complete all as specified/directed.

Supply & fixing of MCB SPN 32 Amps 'C' Series 10 KA complete all as specified/directed.

Supply & fixing of MCB SP 6- 32 Amps 'C' Series 10 KA 415 volts complete all as specified/directed.

Material and labour for point wiring with single core PVC insulated unsheathed cable of size 1.5Sqmm nominal area with multi-stranded FRLS copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping, of suitable size with all fitting and accessories including MS Sunken box of suitable size for housing/mounting the switches/sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLS copper conductor earth continuity wire connected to common earth dolly for one light/fan/call bell point control by one switch, one way complete all as specified and directed.

All as per item No 112 above but for one 3 pin socket outlet 5 Amps, on independent board.

All as per item No 112 here-in-before but point wiring for one 3/5 pin 15 Amps socket point on independent board with 4 Sqmm size PVC insulated, unsheathed, multistranded, FRLSH copper conductor cables and with 4 Sqmm PVC insulated unsheathed, single core, multistranded FRLSH copper conductor cable as earth wire complete as specified and directed.

Supply and fixing switch piano, 5 Amp, flush type, single pole, one way 230 volts, , complete all as specified and directed.

S & F switch socket combination 2 in 1, 5 Amps, flush type complete all as specified and directed.

S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and directed.

Supply and fixing wall mounted LED box type fitting, 1 x 20 watt, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver light fittings 20 watt fixed to wall with two Nos PVC block of suitable size and connection complete all as specified and directed. Make : Havells cat Part No : LHEXBYPNIN1W020 or Jaquar Cat No LGLZ01X020XC/ LGLZ01X20XN/LGLZ01X020XW or equivalent in Philips/Bajaj.

Supply and fixing sheet metal enclosure for MCB’s distribution board, 240 Volts, 04 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door complete and fix all as directed by the Engineer-in-Charge.

Supply & fixing of MCB DP 40 Amps 'C' Series 10 KA complete all as specified/directed.

Supply & Fixing of ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 volts as specified/directed.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable LT 1100 volts grade drawn through and including PVC casing capping of adequate size fixed on surface of wall/ceiling with all necessary fittings and accessories and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi stranded copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring complete all as directed and specified. Note : (a) Connection to DBs/dolly shall be deemed to be included in this item (b) Two runs of 6 Sq mm main conductor, one run of 6 Sq mm as earth conductor and PVC casing capping shall be measured as one run for measurement.

S&F Fan hook suitable for hanging of ceiling fan, made out of MS flat 40x5 mm clamp or 12 mm dia round bar, duly welded/drilled, including nuts, bolts and washers complete as required at site and as directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 m deep below normal ground level, connected to GI earth lead wire 4.0 mm dia means of nuts, bolts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 connected to earthing test point protected by and including GI pipe 15 mm bore (light grade) and connected to main test point as directed and including concrete pit in PCC (1:3:6) type C-1,pre cast RCC (1:1½:3) type A-1 cover slab 54cm x 54cm x 5 cm, reinforced with 8mm dia TMT bars @ 150 mm C/C both ways with one handle for lifting, made out of 8mm dia TMT bar embedded in pre cast cover slab , funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering, charcoal and salt in alternate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical Plate No 3 of SSR Part-I, and testing complete all as specified and as directed .

M/s KRISHNA CONSTRUCTIONS

M/S SEWAK SINGH