REPAIR TO CERTAIN PCC FLOOR/ PATH, FENCING AND OTHER MISC WORKS IN DISPERSAL AREA AT AF STN SONEGAON, NAGPUR

Amount

Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar and removing debris out side MD land complete all as spcified and diercted.

Demolition of stone slabs and chequered floor tiles of any description or thickness in floors aprons etc laid bedded and pointed dry and removing debris out side MD land complete all as spcified and diercted.

Material and labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Gradef approved design & colour laid over 40mm thick layer of sand cushion complete all as spcified and diercted by Engr-in-charge.

Material and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Material and labour chequred cement concrete tiles of size 30cm x30cm and 25mm thick jointed and pointed in neet cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:4) complete all as specified and directed.

Material and labour 75mm thick PCC (1:4:8) type D2 using 40mm graded agg as in sub base complete all as specified and directed.

Material and labour for 100mm thick PCC (1:2:4) type B1 (using 20mm stone aggregate )as in floor finished even and fair complete all as specified and directed.

Material and Labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound type Grade B complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B-0 (using 12.5mm graded stone agggregate) as in coping, benching of manholes, blocks for fixing of rungs and similar works including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Material and Labour for PCC (1:2:4) type B-1 (using 20mm graded stone agggregate) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

Material and Labour for Brick work with flyash bricks old size bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plastering on brick walls/stone walls/ ceiling etc incl racking out of joints hacking for key scrubbing down with water and disposal of rubbish to out side the MOD land complete all as specified and as directed.

Material and Labour for rendering on walls, 15mm thick in cment mortar (1:4) on fair faces of brick work,with WPC @ 3% by wt of cement, surface finished even and smooth with out using extra cement complete all as specified and directed Note: - WPC will measured and paid separetly.

Material and Labour for two coats of cement paint over a coat of primer on walls incl preparation of new plastered surface complete all as specified and as directed.

Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debris out side MD land complete all as specified and as directed.

Material and Labour for cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in surface channels and drains and benching including finishing the top of benching even and smooth with using extra cement complete all as specified and as directed.

Material and Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and as directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and similar work complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

Material and Labour for one coat oil bound distemper over old painted surfaces of walls including preparation of surfaces by scrubbibg washing, putty to fill holes, complete all as specified and as directed.

Dismantling posts or struts (woods, steel or RCC) any section including taking out embedded portion in concrete/ brick work masonry etc and making good disturbed ground complete all as specified and directed by Engineer in charge.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm. complete all as specified and directed by Engr in Charge.

Dismantling of chain link fencing wire mesh or barbed wire any type complete all as specified and as directed by Engr-in-Charge.

Supply and Fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer in Charge.

Supply and fix in repair MS screw bolts of dia 11-15 mm (machine made) with hexagonal or square at one end and screwded with other end or screwed both ends length of bolt n exc 5cm long complete all as specified and directed by Engr-in-Charge.

Material and labour for cement concrete 1:2:4 type B-2 as in foundation filling mass concrete( using 40 mm graded aggregate complete ) complete all as specified and directed by Engineer in Charge.

Welded steel wire fabric supplied and fixed Anticut Anti Climb Unico Shield High Security Fence GI Powder Coated Weld Mesh Panel Fence complete all as approved and directed by Engr-in-Charge. Note: - Chain link fencing, nut bolts and line wires shall be measured separetely.

Supply and fix in repair galvanised stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbes at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised MS wire stapples or steel pins etc complete all as specified and directed by Engineer in Charge. Note: - (Each line of wire to be measured seperately).

Material and labour for preparation of new steel surfaces of any description over 10 cm in width or grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer in Charge.

Material and labour for mild steel framed work of ornamental and intricate design such as in door and gates, framed & hung as gate, including pintel hinges, stops, hand made sliding bolts etc with end of bars shoulded and rivetted or forged into spikes, framed gaured bar, complete all as specified and directed.

Material and labour for Fixing in repair small article of gate Bearing min 75mm incld complete fiixng in ground-02 Nos, Pintel hinges-04, Door sliding bolt-02, Long bolts-02,aring of 100mm -02 for opening of gate b incld taking down of existing gate and refiixng new gate in the same opening incld all neccessary items required to fix gate in position which are essential deemed to be incld in the rates complete all as specified and directed.

M/s M.G. Hargunani (BID ID -3432943)

SRI JD CORPORATION (BID ID -3433575)

Raja Furniture and Interior (BID ID -3433216)