Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.4 LAccepted-AOC 65 VILLAGE KHERI BULANJWALI DISTRICT JIND 126102 | JIND | JIND | HARYANA | 126102 | L1 | Accepted-AOC L1 | |
| 2 | L2₹4.5 L+₹6,540 (1.47%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹4.6 L+₹17,568 (3.96%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹4.8 L+₹33,799 (7.62%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹4.5 L
EMD Value
₹9,000
Closing Date
11 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer RLI W/S Division, Jhajjar
2nd Floor Room No. 208 Sinchai Bhawan Jhajjar
Constructing site office at RD 38000 of SLC
2022_HRY_228374_1
Tender3
Open Tender
Civil Works
Works
30 days
Jhajjar
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹9,000
Yes
27 Dec 2022
2 Jul 2022
13 Jul 2022
2 Jul 2022
11 Jul 2022
2 Jul 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge as per HSR item no 4.12
Providing and laying in position cement concrete 1 :4: 8 ( 1 Cement : 4 coarse sand (zone-Ill) : 8 graded cumstone aggregate 40 mm nominal size) as per HSR item no 6.1.6
Brick work with common burnt clay non-modular bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement: 6 coarse sand) as per HSR item no 7.21.2
Providing and laying damp-proof course with cement concrete 1 :2:4 (1 cement : 2 coarse sand (zone-Ill): 4 graded stone aggregate 12.5mm nominal size) 40 mm thick as per HSR item no 6.8.2
Brick work with common burnt clay non-modular bricks of class designation 7 .5 in superstructure above plinth level up to floor IV level in all shapes and sizes in Cement mortar 1:6 (1 cement: 6 coarse sand) as per HSR item 7.22.2
Providing and laying in position cement concrete of 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) as per HSR item no 6.1.2
Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in Cold twisted bars as per HSR item no 6.34.3
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies as per HSR item no 6.30.3
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers as per HSR item no 6.30.5
12 mm cement plaster of mix 1 :4 (1 cement: 4 fine sand) as per HSR item no 11.5.3
Providing and fixing fan hook made from 8 mm dia MS rod 75 cm long of required shape and size as per HSR item no 23.23.4
Providing and fixing angle iron frames for doors, windows and ventilators of kg 10 74 84 mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge as per HSR item no 13.2
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters 80x1 .20 mm M.S. laths with 1.20 mm thick top cover as per HSR item no 13.37.2
Glass strip 4 mm thick 40 mm deep as per HSR item no B0355
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding as per HSR item no12.50
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. With 2nd class teak wood beading 62X19 mm as per HSR item no12.53.1
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm diameter as per HSR item no 9.57.2
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm Shoe as per HSR item no 9.58.6.2
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm bend as per HSR item no 9.58.5.2
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete as per HSR item no 9.18
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1 :3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete as per HSR item no 9.18 @ 165 per each
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work as per HSR item no 11. 73.1
Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade as per HSR item no 34.50
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied@ 3.84 kg/10 sqm) as per HSR item no 11.93.1
Providing and laying of Conglomerate floor 25 mm thick cement concrete 1:2:4 on 100 mm cement concrete 1:8:16 and 100 mm sand or stone filling as per HSR item no 10.9
6 mm cement plaster of mix 1 :3 (1 cement : 3 fine sand) as per HSR item no 11.1.1
Filling available excavated earth (excluding rock) in trenches, cum plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. as per HSR item no 4.32
Providing and laying of flat brick or tile flooring with bricks of class designation 7 .5 laid in cement sand mortar 1 :4 on 100 mm thick cement concrete 1:8:16 as per HSR item no 10.35.1
Providing gola 75x75 mm in cement concrete 1: 2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1 :3 (1 cement : 3 fine sand) In 75x75 mm deep chase as per HSR item no. 9.17.1
Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm diameter as per HSR item no 9.57.2
Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion 110 mm bend as per HSR item no 9.58.5.2
Providing & fixing in position best quality S.Steel Sink with compelte fitting HSR item .B1418
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White vitreous chinaware Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per HSR item no 22.22.1
Vitreous china 10 litres low level cistern with fittings as per HSR item no B1407
Providing & fixing in position best India make (ordinary) lavatary suits HSR Item No. 22.221.6
Providing & fixing water storage tank 500 Ltr. Capacity (H.S.R. Item 22.181.)
Supply & fixing of pipe make 20 mm dia HSR. 23.6.6.1
Supply & fixing of pipe make 15 mm dia HSR.item. 23.7.6.1
Providing and fixing PTMT bib cock of approved quality and colour 15 mm nominal bore, 90 mm long, weighing not less than 93 gms as per HSR item no 22.111.4
Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms as per HSR item no 22.112.3
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. as per HSR item no 22.209
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms as per HSR item no 22.118
Wiring in 1.5 sqm PVC insulator copper conductor cable 1.6 mm fan point medium HSR Item No. 23.3.1.1
. Wiring in 1.5 sqm PVC lusulator copper conductor cable 1.6 mm 3 pin 5 AMP Plug I/c earthing (short point) HSR Item No. 23.3.4
Wiring in 1.5 Sqm. PVC lusulator copper conductor cable 1.6 mm 3 pin 15 Amp point with 4 sqm. PVC in sulator short point HSR Item No. 23.3.5.1
Miniature circuit breaker & Isolator S&E of MCB of 9KA capacity 6A to 32A HSR Item No. 23.22.5.1
S&E of pipe for wiring purpose conduct pipe 20 mm dia 1.6 mm thickness flused HSR Item No. 23.6.6.1
S&E of PVC unsheated copper conductor single core 1100 volt cable size 1.5 sqm HSR Item No. 23.3.6.11
S&E of PVC unsheated copper conductor single core 1100 volt cable size 4 sqm HSR Item No. 30.40 23.5.6.3
The Chauhan Coop L/C Society Ltd.
MAHENDER SINGH
KRISHANA CONSTN CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .