Providing SCADA system at water Treatment Plant WD-I, Silvassa

Amount

Excavation for pipe line trenches for water supply sewerage line machinehole etc. all with shoring and struting if required as per required gradient and line includign safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In hard murrum, boulders incl. macadam road.

Excavation for pipe line trenches for water supply, sewerage line, machine hole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In all sorts of soil and soft murrum (A) Upto 1.5 Mt. dpt.from G.L.

Excavation for pipe line trenches for water supply, sewerage line, machine hole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In soft rocks and/or masonry (A) Upto 1.5 Mt. dpt.from G.L.

Excavation for pipe line trenches for water supply, sewerage line, machine hole etc. all with shoring and struting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for all lifts and strata as specified. In hard rock and / or in C.C. 1:2:4 or RCC with blasting, breacking, chiseling or by chiseling/breaking only (A) Upto 1.5 Mt. dpt.from G.L.

Providing and casting in situ C.C. in grade M-15 (approx. corresp. to prop. 1:2:4)(proportions as per mix design or as per Table 9 of IS456 2000 in masses by weigh batching ) using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work, including scaffolding centering, form work, needle vibrated consolidation, curing comp. up to 6 meter depth or height (excluding cost of reinforcement and neat finishing) with centering and shuttering/deshuttering etc. comp. for structure for other than water retaining.

Providing and cast in situ C.C. in grade M-30 proportions of ingredients as per mix design by weigh batching using granite, quartzite trap metal of size 12 mm to 20 mm and or 6 mm to 12 mm including scaffolding centering formwork, needle vibrated consolidation, curing and hydraulic testing etc. complete (excluding cost of reinforcement) with centering and shuttering/deshuttering etc. comp. up to 6 meter height /depth Av. G.L.for all water retaining structures

Supplying cutting, bending, binding and placing in position steel as per plan and design and as per ISS 2502 including cost of steel and binding wire for reservoirs/structures only including lift up to 6 meter height or depth below G.L. for all diameters Do-Thermo mechanically treated (TMT) bars Fe-500D grade with epoxy coating for all diameters(with epoxy coating)

Providing brick work using Fly ash building bricks having crushing strength not less than 35 Kgs./Sq.Cm. in cement mortar 1:6 (1 cement; 6 fine sand) as directed etc. comp

Providing and applying 20 mm 'thick sand faced cement plaster on walls or similar surface at all floor levels consisting of 12 mm av. thick backing coat of C. M. 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of C. M. 1:1 (1 cement : 1 sand)

Providing & Applying 15mm.th.cement plaster in single coat on brick/ concrete walls similar surfaces for plastering & finished even & smooth with a floating coat of cement slurry mixed with admixture of lime or neeru in required proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and similar surfaces -- Ground Floor

Steel work welded in built up sections, framed work for M.S. gate including cutting, hoisting, fixing in position and applying a priming coat of red lead paint.t:- (A) in beams & joists channels angles, tees, flats with connection plates or angle cleats as in main & cross beams, hip & trussed purloins connected to common refers & the like.

SS 316 Febrication Work for relevent works as joints, channels, angles, Iron Rails, ISA/ISMC/ISMB/MS flat, Plates, Chequered plates (below 10mm thickness) for cable trench etc. required for support structure of all Electro-mechanical equipment, piping, etc. for support on floor / wall / beam / brackets etc.

INSTRUMENTATION WORK Desigin, Supply, Erection, Teasting and Commissioning of Online Free Residual Chlorine Analyzer,Turbidity Analyzer and PH sensor at WTP as per technical Specification.

Desigin, Supply, Erection, Teasting and Commissioning Sampling pump for Analyzer

Desigin, Supply, Erection, Teasting and Commissioning of Electromagnetic Flow Meter at INTAKEWELL, WTP, UGWSR AND ESR as per technical Specification for various locations. Size : 50 mm

Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Desigin, Supply, Erection, Teasting and Commissioning of Ultrasonic Level Transmitter at INTAKEWELL, WTP, UGWSR AND ESR as per technical Specification for various locations.

Desigin, Supply, Erection, Teasting and Commissioning of Pressure Transmitter at INTAKEWELL, WTP, UGWSR as per technical Specification for various locations. 16 Kg/cm²

MECHANICAL WORK Desigin, Supply, Erection, Teasting and Commissioning of Electrically Actuator operated Butterfly valve with Actuator at UGWSR and ESR as per technical Specification for various locations. Size : 50 mm

Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Desigin, Supply, Erection, Teasting and Commissioning of Double Flange Metallic Expansion Bellows along with Valve and Electromagnetic Flow meter at INTAKEWELL, WTP, UGWSR AND ESR as per technical Specification for various locations. Size : 50 mm

Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Supply, Erection, Teasting and Commissioning MS Fabrication at INTAKE WELL, WTP, WDS and ESR with required chequered plate, Channel, I Beam etc. structural steel for complete work. With ISMB, Angle, Channel, etc.

Supply, Erection, Teasting and Commissioning M.S. Pipes as Technical Specification and as per requirement for various locations. Size : 50 mm

Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Supply, Erection, Teasting and Commissioning M.S. Flanges as Technical Specification and as per requirement for various locations. Size : 50 mm

Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Supply, Erection, Teasting and Commissioning D.I. Flange Socket with required rubber ring and as per requirement for various locations. Size : 80 mm

Size : 100 mm

Size : 200 mm

Size : 300 mm

Size : 400 mm

Size : 600 mm

Supply, Erection, Teasting and Commissioning M.S. G.I Cotted Fastners as per requirement for various locations.

ELECTRICAL WORK Desigin, Supply, Erection, Teasting and Modification in existing PMCC Panel at Intake well, WTP, Booster and WDS as per technical Specification as per requirement for SCADA system

Supply, Erection, Teasting and Commissioning Cu. Armoured 3c x 1.5 Sqmm Cable as per requirement for various locations.

Supply, Erection, Teasting and Commissioning Cu. Armoured 12c x 1.5 Sqmm Cable as per requirement for various locations.

Supply, Erection, Teasting and Commissioning Cu. Flexible 1c x 1.5 Sqmm Cable as per requirement for various locations.

Supply, Erection, Teasting and Commissioning 3c x 1.5 Sqmm Cable End Termination as per requirement for various locations.

Supply, Erection, Teasting and Commissioning 12c x 1.5 Sqmm Cable End Termination as per requirement for various locations.

Supply, Erection, Teasting and Commissioning F.R.P. Perforated type cable tray as per requirement for various locations. Size: 50mm

Size: 100mm

Size: 150mm

Supply, Erection, Teasting and Commissioning of type earthing having earth plate of following size burred in specifically prepared earth pit 3 mtr. below ground with 40 kg. charcoal and salt with alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering & bricks masonry block, C.I. Cover complete as per para 7.3 of IS 3043 with necessary length of double Galvanised Iron / copper earth wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia. G.I. pipe 2.5 mtr long complete connected to the nearest switch gear with end socket as per direction & duly tested by earth tester confirming to IS with following specification (A) With 30 x 30 x 0.35 cms: G.I. earth plate

(B) with 30 x 30 x 0.35 cms Copper earth Plate

Interconnecting the earthing stations and various equipments in built up trenches, walls/ceiling, buried in ground. Supply, Erection, Teasting and Commissioning of Hot Dip G.I. Earthing Strip 25mm x 6mm

Interconnecting the earthing stations and various equipments in built up trenches, walls/ceiling, buried in ground. Supply, Erection, Teasting and Commissioning of Copper Earthing Strip 25mm x 6mm

SCADA AUTOMATION WORK SETC of PLC/ SCADA based Control Panel with Required Min. IO’s 10 DI/ 39 DO / 38AI / 4 AO as per technical specification at Central SCADA 1 UPS with 1 hours battery Backup, 3 Desktop , 2 75" LED TV , 1 Laptop MS SQL Server Standard 2019 ,

SETC of RIO/PLC/HMI based control Panel with Required IO’s ,DI, DO, AI, AO as per technical specification at For various locations with 1 UPS for each locations

Wireless Connection for 5 Years with IIOT implementation

SETC of Multifunction meter with CT at Intake well, WTP, Booster and WDS as per technical Specification

CCTV Camera with 2 TB Storage

Fiber Optic Cable 6 Core

Standard LIU 2 Pcs 6port loaded

Fiber To Ethernet Converter MEDIA CCONVRTER

4 Port Giga Switch 3 Pcs 5GIGA

Ethernet Cable

Network line work If Required Providing and Supplying in standard length ISI mark high density Polyethylene H.D.P.E pipes suitable for potable water as per IS specificatiom no. 4984/1995 incl. all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to Department stores, stacking etc. complete. (10Kg/Cm2) Dia. in MM. 50 mm

HDPE Line 100 mm

HDPE Line 150mm

HDPE Line 200 mm

HDPE Line 250 mm

HDPE Line 300 mm

HDPE Line 355 mm

Manufacture, Supply & Delivery of Submerged Arc welded M.S.Pipe outside coated with best quality bituminous paint having beveled ends plate or coil conforming to IS-3589-2001 or its latest revision/ammendment for following thickness outside diameter at store or site anywhere in State including all taxes (excl. excise duty), insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to Department stores, stacking etc. complete. (rate of MS pipe based on the ex. works price of HR coil as Rs 54500.00 per MT (Above 3.15mm to 10mm) & Rs 55000.00 per MT (Above 10mm) as on March 21. 50 mm

M.S. Line 100 mm

M.S. Line 150mm

M.S. Line 200mm

M.S. Line 250mm

M.S. Line 300mm

M.S. Line 350

Man power required during commissioning work (3 months) Project In Charge (Mechanical)

SCADA Engineer

Instrument Engineer

ITI Fitter

ITI Wireman

Helper

P C SNEHAL CONSTRUCTION PRIVATE LIMITED (BID ID -20645)