Providing and fixing of chain link fencing and plantation of 1000 nos at Anlay Naga area of Nyoma Forest Range for the year 2024-25 (under departmental plantation of District CAPEX)

Amount

Earth work in excavation by mechanical means (hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm 0n plan)including disposal of excavated earth, lead up to 50m and lift upto 1.5m All kind of soil

Providing and laying in cement concrete of specified grade include. Curing but excluding the cost of centering and shuttering. All work upto plinth level of 1:3:6 ( 1 cement, 3 coarse sand, stone aggregate of 20mm nominal size crushed stone aggregate) in blocks.

Providing and fixing of Angle Iron Fence Post made of MS angles (50 x 50 x 6mm) in built up sections and framed works including. Cutting housing single section 2.14 Mtr long with 15cm foot/ toe at the bottom with whole drilled and top bends.

Centering and shuttering including strutting, propping etc removal of form for: Foundations, footings bases of columns etc for mass concrete.

Providing and fixing of G.I chain-link fencing fabric 4mm dia fence cold dip galvanized of required mesh size 10cm x 10 cm wire of ( 4’’ x 4’’) mesh, including strengthening/ binding with 2mm dia wire or nut bolts and washer as required completely.

Providing and laying and strengthening of barbed wire at top of the fence post including all jobs.

Supply at site Angle iron post and strand of required size including bottom to be split and bend at triangular in opposite direction of 10 cm length and drill hook upto 10mm dia etc of complete job. Flat

Providing and installation of fabric iron Gates 6’ x 12’= 1 Nos with angle iron Framed including. Master pillars (6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely.

Providing and installation of febric iron Gates 4’ x 6’= 1 Nos with angle iron Framed including. Master pillars ( 6’’ x 6’’) with cutting hoisting welding and all fitted and fixture and all lead completely.

Providing and fixing MS iron sheet 3mm of require pattern for Sign Board for main Gate Entrance with one coat of steel premier and two coats of paint including departmental logo and writing etc with cement concrete, sizing ( 6’ x 4;) with 7’.00’’ legs ( 50 x 50 x 6mm)

Carriage of sand and stone agg. by Mechanical Transport from source to working site for a distance of 10.00 Km. Sand and Stone agg.

Carriage of cement. By Mechanical Transport from sources to Anlay by an average of 240 Km.

Carriage of Fencing Materials by mechanicals Transport from Leh to Anlay for an average of 240.00 Km.

Extraction of willow green cutting this including carriage collection bundling and internal carriage.

Pits Planting of willow green cutting this including excavation of pits 0.45x0.45x0.45m along the contour as well as on flat surface. This includes the formation of water harvesting structure etc.

Carriage of planting materials from near sources to planting site by manual carriage, this includes loading and unloading charges etc.

M/S STANZIN NAMGYAL GOVT CONTRACTOR (BID ID -144586)

M/S KHARU FABRICATION (BID ID -144575)

Aggxima Entrprise (BID ID -144340)

M/S YOKMA STEEL FABRICATION (BID ID -144579)

M/S JARA STEEL FABRICATION (BID ID -144328)

M/S SD FABRICATION (BID ID -144541)