CERTAIN REPAIR REPLACEMENT OF HT UG CABLE GOD OVER HEAD CONDUCTOR UNDER GE GURDASPUR

Amount

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 m wide and n.exc. 1.5 m in depth for poles, stay, cable, pipe etc and getting out complete all as specified and directed.

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 m wide and depth exceeding 1.5 m and n. exc 3 m for poles, stay, cable, pipe etc and getting out complete all as specified and directed.

Returning, filling in, including spreading,leveling,watering and well ramming in layers each n.exc 25 cm thick in soft loose soil complete all as specified and directed.

Removing excavated material n exc. 50mtr and depositing where directed at a level n exc. 1.5 mtr above,the starting point complete all as specified and directed.

Supply and laying un-reinforced precast conncrete cable cover, class HV, type I, flat, size 300 mm x 180 mm x 40 mm laid flat in trenches over the cable with the length of cable cover perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed.

Material and labour for Sand cushioning trenches using fine sand to under ground cable, laid in two layers 8cm before laying the cable & 15cm after laying the cable complete all as specified and directed.

Material and labour for in replacennt of cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 100mm bore with necessary clamps complete all as specified and directed.

Material and labour for cable protection GI tubing light grade fixed long the pole/under road/along the wall of size 80mm bore with necessary clamps complete all as specified and directed.

Material and labour for crossarms in replacement , bracing, supports, clamps and brick plates, fabricated from staructural steel section including nut bolts washers including weldingbending , cold or hot drilling holes for bolts in any shape or size as indicated in drawings or as directed, including two coats of aluminium paint over a coat of red oxide complete all as specified and directed.

Supply and fixing in replacement of vertical polymer type switch air break gang operated switch tripple pole mechanically operating mounted on insulator and steel frame with operating mechanism worked from ground level for current rating up to 200 Amps and working pressure of 11000 volts grade consisting of 4 insulator per pole with 25 mm dia GI medium grade operating handle and locking arrangements fixed with down rod operating brackets complete all as specified and directed.

Supply and fixing in replacement of vertical polymer type switch air break gang operated switch tripple pole mechanically operating mounted on insulator and steel frame with operating mechanism worked from ground level for current rating 400 Amps and working pressure of 11000 volts grade consisting of 4 insulator per pole with 25 mm dia GI medium grade operating handle and locking arrangements fixed with down rod operating brackets complete all as specified and directed.

Supply & laying in replacement of underground XLPE insulated and PVC sheathed galvanised steelstrip (E) armoured (under ground) heavy duty electric cable with stranded aluminim conductor 11000 volts (E) grade of cross sectional area 185 Sqmm 3 core conforming to IS-7098 (partII) 1985 with the latest ammendment laid in trenches/ducts/through pipes/in floor/road/along the pole etc complete all as specified and directed.

Supply & laying in replacement of underground XLPE insulated and PVC sheathed galvanised steelstrip (E) armoured (under ground) heavy duty electric cable with stranded aluminim conductor 11000 volts (E) grade of cross sectional area 120 Sqmm 3 core conforming to IS-7098 (partII) 1985 with the latest ammendment laid in trenches/ducts/through pipes/in floor/road/along the pole etc complete all as specified and directed.

Supply & laying in replacement of underground XLPE insulated and PVC sheathed galvanised steelstrip (E) armoured (under ground) heavy duty electric cable with stranded aluminim conductor 11000 volts (E) grade of cross sectional area 95 Sqmm 3 core conforming to IS-7098 (partII) 1985 with the latest ammendment laid in trenches/ducts/through pipes/in floor/road/along the pole etc complete all as specified and directed.

Supply and fix in replacement Pin type, porcelene insulator including two galvanised iron washers and one galvanised iron nut, 150mm height, 150mm dia for 11000 volts grade complete all as specified and directed.

Supply and fixing in replacement of 25 mm dia GI pipe medium grade including locking arrangemet for operating the GOD complete all as specified and directed.

Supply and Fixing in Replacement of Steel tubular swaged poles complete with cast iron base plate, final taper plug, bolts, nuts & screws as specified type 410 SP-55 (11 metres long) including painting with two coats of aluminium paint over a coat of red oxide primer including 5 Nos alternate bands/ strips of 30cm wide each with two coats of radium spray/synthetic enamel paint (Red and Yellow) at a distance of 30cm from the plinth block upto 1500mm height and marking of pole number with thick synthetic enamel paint (white) including preparation of surface complete all as specified and directed.

Material & labour for stay assembly complete comprising of 7/3.15 galvanised stranded stay wire of required length, fixed to pole with and including FI clamps 50 x 6 mm, bolt, nuts washers, GI stay rod 20 mm dia and 1800 mm long, stay bow 400 x14mm, GI steel plate 300x300x6mm, Disc type insulator, porcelain,vitreous 145mm high and 255mm dia ball and socket type, white, brown or green clearance hole 16mm including two coats of aluminium paint over a one coat of red oxide primer on exposed mild steel work all as shown in Electrical Plate No. 1 of SSR part - I 2009 on Page No 495 compelete all as specified and directed. (Note :- Earth work, PCC work, and Insulator measured and paid separately)

Material and labour for Providing PCC 1:4:8 type D:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation coping of poles etc. complete all as specified and directed.

Material and labour for roviding PCC 1:3:6 type C:2 using 40mm graded crushed stone aggreate as in foundation for pole/stay assembly foundation coping of poles etc complete all as specified and directed.

Material and labour for Providing PCC 1:2:4 type B:2 using 40mm graded crushed stone aggreate as in coping of poles incl taking down of old copping of the pole complete all as specified and directed.

Material and labour for preparation of old painted steel and iron surfaces and painting to steel structure installed at 66 KV Sub Stn and other substation and applying two coats of aluminium paint on cross arms, bracing, clamps, chanels etc complete all as specified and directed.

Supply and fixing in Replacement of lightening arrestor in replacement expulsion type for out door use complete with all fitting station class discharge capacity 65 KA suitable for 11000 volts including bracket, clamps, nuts, bolts washer and connection to each wire complete all as specified and directed.

Supply and fixing in replacement ACSR conductor including straching on OH line including binding on insulators with aluminium binding wire including jumpers and jointing complete all as specified and directed. Note :- (i) Weight of ACSR or all aluminium conductor drawn for OH lines is to be measured by measuring tap horizontal distance between centres of two addacent poles and compounding the weight of conductor of that size and length and 3 % extra added for sag, jointing, jumpers and binding etc complete all as specified and directed. (ii) Weight of conductor shall be calculated from tables given in the relevant I.S.

Material and labour for end termination indoor heat shrinkable joint suitable for 11KV cable 95 sqmm 3 core complete all as specified and directed. Note for Item No 25 to 32 : Excavation & earth work in any type for taking out the existing cable loop to fixing the end joint Cost of excavation is included in quoted rate and nothing extra is admissible on this account.

Material and labour for end termination indoor heat shrinkable joint suitable for 11KV cable 120 to 185 Sqmm 3 core complete all as specified and directed.

Material and labour for end termination indoor heat shrinkable joint suitable for 11KV cable 240 to 300 Sqmm 3 core complete all as specified and directed.

Material and labour for end termination outdoor Heat shrinkable joint suitable for 11KV cable 95 sqmm 3 core complete all as specified and directed.

Material and labour for end termination outdoor Heat shrinkable joint suitable for 11KV cable 120 to 185 Sqmm 3 core complete all as specified and directed.

Material and labour for end termination outdoor Heat shrinkable joint suitable for 11KV cable 240 to 300 Sqmm 3 core complete all as specified and directed.

Material and labour for straight through jointing heat shrinkable type kit suitable for 11KV cable 95 sqmm 3 core complete all as specified and directed.

Material and labour for straight through jointing heat shrinkable type kit suitable for 11KV cable 120 to 185 Sqmm 3 core complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron 32 x 6 mm strip as earthing lead by means of galvanized steel bolts, nuts check nuts and washers and other end connected with to Transformer ,DG set,Panel Board etc as directed including funnel, 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6, type C1, with cover of 50mm thick pre cast RCC 1:2:4 type B1with 8mm dia cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing complete all as specified and directed.

Supply and fixing in Replacement Earth continuity conductor or main earthing lead fixed to wall/on batten or reces or chases or buried in ground or drawn in condit/pipe or fixed to poles or any other indicated situation for loop earhing etc. as required galvanised iron strip of size 25 x 4mm complete all as specified and directed.

Material and labour for replacement danger notice plate for HT pole of size 25 cm x 20 cm of 1.6 mm thick mild steel sheet viterious enamaled white with letter figur and conventional skull and bones "DANGER" (English, Punjabi and Hindi) in signal red colour and fixed with MS clamps made of 25mm x 3mm MS flat Iron bolts nuts complete including two coat of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for in replacement of polymer type single disc insulator assembly for tension with tension clamps for conductors,working pressure 11000 volts complete all as specified and directed.

Supply and fixing of Mild steel Chequre plate of 5mm thick or over in thickness of Gde Fe 410 W (Gre-E-250)quality-A in replacement of PCC type duct cover quality complete all as specified and directed.

Material and labour for fo 50 mm thick PCC 1:2:4 type B1 using 50 mm graded crushed stone aggregate as in floor finished even and smooth without using extra cement including demolition of existing concrete complete all as specified and directed.

Dismantling of ACSR Conductors any size complete and stacking complete all as specified and directed.

Dismentling of cross- arms of MS channel or angle section etc. complete and setting for re-use within 50 m complete all as specified and directed.

Material & labour for preparation of old painted steel and iron surfaces to yard fencing installed at 66 KV Sub Stn and other substation and applying two coats of Black Japan paint on iron structure complete all as specified and directed.

Labour for drilling hole under the road with the help of bocki / by manual or by machine for crossing GI tubing of any size for cable protection complete all as specified and directed.

Repair/servicing of existing GOD and decarbonized proper and proper function mechanisim device fixed to nut bolt and use petrolium gel, proper jumpering with and replacement of u/s parts of the GOD complete all as specified and directed. Note :- Replacement of items like , Post type Insulator, Male, Female link , tenson spring with copper belt, etc shall be measured and paid for seprately.

Supply and fixing of in repair of Post type polymer insulator for current rating 200-400 amps for GOD 11000 Volt complete all as specified and directed.

Supply and fixing of repair HT movable link assembly with barrided copper belt of current rating 200 to 400 Amps for GOD 11000 volt complete all as specified and directed.

Supply and fix in replacement of male link assembly with brass tinned contact for GOD 11000 Volt grade complete all as specified and directed.

Supply and fix in replacementof female link assembly with brass tinned contact for GOD 11000 Volt grade complete all as specified and directed.

Supply and fix in replacement of fuse unit fix link with brass tinned contact for current rating 200 to 400 amps for GOD 11000 Volt complete all as specified and directed.

Supply and fix in replacement of operating handle of the GOD complete all as specified and directed.

Material and labour for fault detection in damaged UG cable by using cable fault detector to accuracy of 2 m for various location at Tibri Mil Stn of any size and type upto 11KV including the following in quoted rate complete all as specified and directed. (i) excavation & earthwork in any type of stratra of size 4 x 2 x .60m to usually inspect / reapair the damaged cable when and where required. (ii) Sand cushioning in trenches, supply and laying conncrete cable cover, class HV, type I, flat, size 300 mm x 180 mm x 40 mm laid flat in trenches over the cable. (iii) Repair the damaged cable through straight joint as per existing size and made functional. Note :- (i) The fault should be done by 2 Days of time frame after informed by Tephonically/Whatsapp Msg or letter. Falling which 1000/- per day will be levied from the contractor as penalty. (ii) Joint should be paid separately.

Re-streching of existing ACSR conductor of any size any type as required sag fixed on OH line & insulators/cross Arms on poles properly binding on insulator with alumminum conductor complete all as specified and directed. Note:- (i) Fixing of New ACSR conductor paid seperately (ii) Each span having 35 to 60 m distance approximately

Labour for cutting the tree branches passing near the HT OH line of width/ girth not more than 30cm upto 3 meter distance from adjacent pole or four/two pole struction complete all as specified and directed. Note ;- (i) Each span having 35 to 60 m distance approximately (ii) All cutting branches of trees shall be thrown away /burnt at approximately 200 to 500 m away from site. (iii) Transport to be provided by contractor to thrown away the branches, Cost of Transportation is included is quoted rate. (iv) Pruning the branches as and when required shall be carried out within three days after intimated telephonically/whatsapp msg or by letter to contractor, failing to do so penalty of Rs 400/ per day will be levied on the contractor.

Supply and fixing in replacement of safe 11KV high voltage PCC type tape roll 15 m lngth complete all as specified and directed.

Material and labour for preparation of old painted steel and iron surfaces and painting to 4 pole structure PCC poles of height 11 metre, any type (double swan / single swan) with two coats of synthetic enamel paint upto 1.5 m height above from ground level (in white and black strips 5 Nosx 30 cm wide each) and applying two coats of aluminium paint on cross arms, bracing, clamps, chanels etc and writing pole number with black synthetic enamel paint complete all as specified and directed.

Material and labour for preparation of old painted steel and iron surfaces and painting to 2 pole structure PCC poles of height 11 metre, any type (double swan / single swan) with two coats of synthetic enamel paint upto 1.5 m height above from ground level (in white and black strips 5 Nosx 30 cm wide each) and applying two coats of aluminium paint on cross arms, bracing, clamps, chanels etc and writing pole number with black synthetic enamel paint complete all as specified and directed.

Material and labour for painting to panels & feeder pillar box, any sizes, installed at 66 KV Sub Stn with two coats of super enamelled paint of approved colour with spray painting machine including preparation of the surface complete all as specified and directed.

Supply and fixing replacement of nut bolts and washers of sizes as per samples complete all as specified and directed.

Supply and fixing in replacement of XLPE insulated PVC Sheathed single core Aluminium unarmoured of 11000 Volts grade cable for using as a jumper in HT overhead line whereever required of size 95 sqmm complete all as specified and directed.

Supply and fixing in replacement of Tinned copper fuse wire capacity 60 Amp SWG 17 complete all as specified and directed.

Supply and fixing in replacement of Tinned copper fuse wire capacity 40 Amp and SWG 19 complete all as specified and directed.

Supply and fixing in replacement of Tinned copper fuse wire capacity 25 Amp and SWG 21 complete all as specified and directed.

Supply and fixing in replacement of Tinned copper fuse wire capacity 15 Amp and SWG 24 complete all as specified and directed.

Material and labour for for precast cement concrete RCC (1:2:4 type B-1 route indicator of size 150x150x900mm with 8 mm dia steel einforcement @ 100 c/c both ways duly engraved " HT CABLE/HT JOINT /FEEDER NO " with two coats synthetic enamel paint first quality fixd with (PCC 1:3:6) below ground level of size 30x30x300mm complete all as specified and directed. Note : Quoted unit rate is deemed to be included the necessary cost of excavation, returning filling and removal etc complete all as specified and directed.

Material and labour for paint of PCC HT pole with two coats of synthetic enamel paint upto 1.5 m height above from ground level (in white and black 5 strips of 30 cm wide each) and applying two coats of aluminium paint on cross arms, bracing, clamps, chanels etc and writing pole number with black synthetic enamel paint including 3x strip of 3 cm widh of light reflective paint complete all as specified and directed.

Supply and fixing in replacement of old PVC First aid box of size 30 cmx30cmx20cm including necessary first aid material/medicine i.e burn cream, bandage, cotton, detol, pain killer tablet of 10 Nos, Scissor, banded-10 Nos complete all as specified and directed.

Material and labour for for Shock treatment chart coloured and written in Hindi, punjabi and English including lamination board of size 1mx1m complete all as specified and directed.

Material and labour for for magnesium sulphate for using in earthing complete all as specified and directed.

Supply and fix in replacement of flexiboard for sub station houses building of size 1.8 mx .50mX0.3m outer frame of board should be make out of aluminium frame of thickness of not less than 3mm. The marking/writing of SUB STATION number will be make out of radium letter and font size will be decided by Engineer-in -charge. Approximate 15-20 letter to be accomodate within the frame. The box of frame should be provided two nos of LEd bulb of not less thant 15 watt with holder and wire for connection at both ends, The electric connection to be given by means of suitable wire size through conduit from three respective sub stations buildings. the contractor have lto provide the holding arrangemnt on the wall of substation buildings. the contractor have to provide the holding arrangemennt on the wall of pump houses/substation building complete all as specified and directed.

Material and labour for replacement of bamboo ladder of 28 steps as approved by Engineer-in-Charge suitable for HT complaints complete all as specified and directed.

UNITED ENGINEERING CORPORATION (BID ID -3355164)

R D Bansal (BID ID -3355207)

kailu construction co (BID ID -3355524)

D S INFRASTRUCTURE AND DEVELOPERS (BID ID -3355105)

Elite Builders (BID ID -3354864)

JAI DURGA CONSTRUCTION CO (BID ID -3355700)

M/S SHRI RAM BUILDERS (BID ID -3355353)

INDERJIT SINGH (BID ID -3355149)

KULBHUSHAN AGGARWAL (BID ID -3354668)