Under District Sultanpur, Extensive repair work of BRC Centre at Block Dubepur, Lot No 1

Dismantling of old plaster including disposal of refuse as directed by Engineer- incharge within a distance of 60 meter. , DSR 15.56

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete, DSR 13.88

Brick work 1:4 with cement and mortor as DSR 6.4.1, DSR6.4.1

Repair to plaster 12 mm. thick plaster in 1:4 cement and Coarse sand including supply of all materials, labours and T&P etc. required for proper completion of work., DSR 14.1.2

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., DSR 13.80

Finishing Walls with acrylic smooth exterior paint of required shed new work (two or more coat [email protected]/10sqm over and including priming coat of exterior primer applied @2.20kg@10sqm(ace Adv walmasta )Asian Berger as perspecification no13.47.1, DSR 13.46.1

Painting and warnishing two coats over one priming coat of approved quaility., DSR 13.62.1

30mm thick FRP Door shutter of required colour and approved brand .as per DSR 9.21.2, DSR 9.21.2

Providing and fixing 1mm thick MS sheet door with fram 40x40x6mm angle iron and 3mm MS gusset plate at the junction and corner, all necessary fitting comp including prime coat of approved steel primer AS per DSR 10.5.1, DSR 10.5.1

Supply and fixing of 6mm thick china white glazed tils in dado or skirting laid with 1:3 cement and coarse sand mortar finished with white cement slurry jointing and polishing complete. , DSR 8.3

Proiding and laying of Vitrified tiles in different size (600X600mm) with laid with 1:3 cement and coarse sand mortar finished with white cement slurry jointing and polishing complete. As per DSR 11.46.2, DSR 11.46.2

Steel weld mesh (murga Jali), DSR 1223

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources), DSR 4.10

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge DSR 18.7.1 CPVC pipe 15 mm dia, DSR 18.7.1

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge DSR 18.7.2 CPVC pipe 20 mm dia, DSR 18.7.2

Bib Cock 15 mm dia, DSR 18.15.1

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fitting and fixtures completed including cutting and making good the walls and floors wherever required.

White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests, DSR17.1.1

Providing & fixing white viterous china wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fitting and brackets, cutting & making good the walls wherever required .

Flat back Wash Basin size 550X400 mm with single 15mm C. P. brass pillar tap, DSR17.7.4

Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete., DSR17.31

Electrical work

Wiring point for light with 1.50 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire, piano type switch & ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc., complete in all respect, as directed including matching colour, 131 ( C )

Same as above but for Fan point SI no.133(c) , 133 ( C )

Same as above but for plug point SI no.134(c) , 134 ( C )

As in item no.1306(B) but in 25 mm dia heavy duty (2 mm thick) PVC conduit with 2 number 1.5 sq. mm. FRLSH PVC insulated1100 V grade multi strand single core copper conductor cable as earth continuity wire drawn insidethe conduit., 1306©

S&F surface/flushmounting4 ways SPN distributionboard with additional metal door without MCB complete in all respect, as directed at site by Engineerin charge., 1022(A)

S&F of 6 Amp to 32 Amp. MCB (10 KA) C Curve C, 1002(A)

Supply and fixingof LED Tube Lightwith batten suitablefor up to 1 X 22 watt LED tube light complete includingtube etc on surface complete in all respect., 1413

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existingswitchboard includingmakingconnections, required material,labour T&P etc. for proper completionof work to the satisfactionof Engineerin charge of work., 1203(A)

Supply & fiixing of LED 9 watt approved Brand (Market Rate)

Supply & fiixing of ceiling fan 1200 mm approved Brand (Market Rate)

Please Enable Macros to View BoQ information