REPAIR REPLACEMENT OF TILES, FALSE CEILING, PAINTING ETC FOR 509 ABW MIL WING, SP LINE, MP LINE, GWALIOR ROAD KB LINE , ARO, GE OFFICE ETC UNDER AGE BR II OF GE EAST AGRA

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

Dismantling of stone slab of any description or thickness in floor ,step, riser etc laid bedded and pointed complete all as specified and directed.

Dismantling of mild steel work of any description not otherwise provided for etc complete all as specified and directed.

Material and labour 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in sub floor, sub base, to receive tiles omplete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, to receive tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles etc complete all as specified and directed.

Ditto all as per item No.9 above but in dado / skirting etc.

M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.18 sqm but n. exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles etc complete all as specified and directed.

Ditto all as per item No.11 above but in dado / skirting etc.

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

Ditto all as per item No. 13 but as in Skirting

M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and n. exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and as directed.

Ditto all as per item No. 15 but as in Skirting

M&L for glazed ceramic coloured tiles of size 450x350x7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.

M&L for glazed ceramic coloured tiles of size 300x200x7mm thick fixed over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and drected.

M&L for 20-25 mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 , lade and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified and directed.

M&L for 20-25 mm thick machine cut kota stone slab as in skirting , riser of step , dado and pillar etc over 15 mm thick cement plaster in CM 1:4 , lade and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement etc complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of Oil bound distemper over a coat of primer on walls complete all as specified and directed.

Dismentling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets complete all as specified and directed.

S&F in repair 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x27mm and main T 23mm x 35 mm of 30 gauge suitable for false ceiling including GI wire 3 mm thick @ 1200 mm centre to ceter both ways for hanging arragement complete all as specified and directed

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed

S & F Mild steel such as joist channel angle tee section fixed independently without connecting plates etc complete all as specified and directed.

S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame ( top and sides should be covered / packed ) as per specifications and drawing complete all as specified and directed.

S & F in repair 5 mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed.

Cutting holes in brick wall built in cement mortor or cement lime mortor and stone wall built in lime mortor or wall of cement concrete of superficial area n. exc 150 sqcm and making good in cement mortor 1:3 or cement concrete 1:2:4 type B1etc complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

Mahendra Enterprises

Asha Construction

M/S OMKAR SINGH YADAV

shubham traders

3Krishna Enterprises

SHRI RADHAYSHYAM JHA

C P Singh and Co

JWALA ELECTRIC CONTRACTORS

N.K. ENTERPRISES

M/S OM Enterprises

SahaDevSingh Constructions