Construction of kitchen at community hall at Nyarchung Thiksay PII

Amount

Providing and laying dry stone soling in foundation bed wall bed flooring incl.cost of stone

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1: 6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size)

Reinfrcement for RCC work including straightening cutting bending placing in posistion and binding all complete thermo Mechanically Treated bars

centering and shuttering incl strutting propping etc lintels beams plinth beams girders bressumers and centilevers

Centring and shuttermg including strutting, propping etc. and removal of form for• suspended floors roofs landings balconies and access platform

15mm Cement plaster on the rough side of single or half brick wall of mix: 13.5.1 1 : 4 ( 1 cement : 4 coarse sand)

6mm cement plaster to ceiling of mix 1 : 3 (1 cement: 3 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing glazed shutters for doors, windsand clerestory windows using 1 Okg/sqm (4mm thick) float of glass panes including lSI marked M.S. pressed butt· bright finished of required size with necessary screws

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

carriage of sand and aggregate from 7km by mt

carriage of cement and steel from 20km by mecehnicl transport

carriage of stone from 5km by mechanical transport

Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 1.5 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, without box as required.

Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in existing recessed PVC conduit including sheet as required

Supplying and fixing 0f 1 inch, ¾ inch pvc conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 10 amp 240 volt single pole grid plate mounted switch indicator with molded copper plate including recessed 2 inch ms box complete as required including connection.

Supply and fixing of combined 3 pin 240 volt 20amp socket outlet with safety shutters and 20amp 240 volt single pole mounted in recessed including m.s box complete as required

Supply and fixing of combined 3 pin 240 volt 10 amp. Socket outlet with safety shutter and 10 amp. 240 volt single pole mounted in recessed including complete MS box complete as required.

3modular plate

6 modular plate

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required single pole 6/10/20amp

Supply and fixing of MCB of following poles in the existing MCB DB complete with connections testing and commission etc, as required double pole 63 amp

Wiring for change over 63 amp. And installation with complete accessories and hole on the wall as required

Supply and fixing the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed / tube lightning 20 watt 3000k, round led luminaries as per Philips

Supply of 1100volt grade aluminium conductor KPLE insulated pvc sheath arranged complete as per specification as required 25 sqmm

Supply and fixing of following single pole and netural sheet steel MCB distribution box 240 volts on surface recess complete with tinned busbar netural link earth bar, tin bar, detachable glaud plates, double door interconnected including pointing etc as required 12 way double door SPN

M/S THINLEY DORJAY

M/S TUNDUP WANGAIL GOVT CONTRACTOR