COMPREHENSIVE MAINT, REDRESSAL OF DAY TO DAY COMPLAINTS AND PERIODICAL SERVICES IN MD/OTM ACCN BLDGS OF NTG / NLC IN THE AOR OF GE (NORTH) BANGALORE

Amount

Demoltion of Cement Concrete (Un-reinforced) in ground floor and paving not exc 15 cm thickness ( below or above ground level) etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

M&L for 75 mm thick Plain cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed

M&L for 25 mm thick Plain Cement concrete type B-0,1:2:4 (using 12.5mm graded aggregate) as in levelling course of flooing etc complete all as specified and as directed

M&L for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L vitrified Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

All as per item No 6 here in before but as in skirting /dado including backing coat 10 mm thick in CM 1:3 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor including screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L Glazed ceramic coloured tiles 350X250X7mm/450X350X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in CM 1:4 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only water proofing compound (Liquid) complete all as specified and as directed.

S & F for solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etc c omplete all as specified and as directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S & F in repair vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete of cera model cat pt no. 2008 including plastic EWC seat cover, coloured closed pattern with flat bottom and cover of cera model cat pt 2308 and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, 32 mm bore waste stainless steel coupling and LDPE pipe 600 mm long complete all as specified and directed.

S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair 15mm Bib taps Fancy type, Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

S&F in repair 15mm bore dia of pipe CP Mixer for mixing hot and cold water screwed down for iron pipe etc complete all as specified and as directed

S&F in repair 15mm dia Angle / Stop / Concealed cock, Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed

S&F in repairs 15 mm dia bore Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union etc complete all as specified and as directed

S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall as directed by Engineer-in charge.

S&F in repairs Stainless steel plate rack of size 990.60mm x 914.40mm including fixing to wall as directed etc complete all as specified and as directed

S&F in repairs SS Grab bar Towel rail 450 mm long including fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag of equlavent make of Cera)

S&F in repairs stainless steel towel ring including fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag of equlavent make of Cera)

S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified.

S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.

S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs including 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and directedd.

S&F in repairs 75 mm dia of PVC (SWR) Multi floor trap, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed on walls etc including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed on walls incl dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F 110 mm dia PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 110 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) etc complete all as specified and as directed

S&F 75mm PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F 75mm dia PVC (SWR) Junction (Single T) equal or unequal etc complete all as specified and as directed

S&F 75 mm dia PVC (SWR) Junction (Single T) equal or unequal with access door etc complete all as specified and as directed

S&F 110 mm dia PVC SWR branch pieces, single( Single Y) equal or unequal etc complete all as specified and as directed .

S&F 75mm dia PVC SWR branch pieces, single (Single Y) equal or unequal etc complete all as specified and as directed .

S&F in repairs 110 mm dia bore PVC (SWR) vent cowls complete all as specified and as directed .

S&F in repairs75 mm dia bore PVC (SWR) vent cowls complete all as specified and as directed .

Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc and applying two coats distemper oil emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed complete all as specified and as directed

M&L for 2mm thick wall care putty on new / old plastered surface of wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

M&L for preparing newely plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing Old ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L Preparing new /Old Previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Sathya Sri Construction (BID ID -3217175)

M.Z.BUILDERS (BID ID -3221925)

RK Builders (BID ID -3223214)