Widening of Jajamau New Chungi to STP Road

Amount

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m.asper MORT&H specficatin clause no.301.

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete asper MORT&H specficatin clause no.401.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired densityasper MORT&H specficatin clause no.406.

Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.asper MORT&H specficatin clause no.502(I).(Rate including Bitumin Emulsion SS-1)

Providing and laying dense graded bituminous macadam with higher capacity batch type HMP 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respectsGradingII.(Rate Including Bitumin VG-30)

Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.asper MORT&H specficatin clause no.503.(Rate Including Bitumin VG-10)

Providing and laying bituminous concrete with higher capacity batch type hot mix plant 120 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects Grading-II.(Rate Including Bitumin VG-30)

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.asper MORT&H specficatin clause no.2100.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications.(Grade M20) asper MORT&H specficatin clause no.1500,1700 &2200. M-20

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications.asper MORT&H specficatin clause no.1600.

Providing & laying of 80 mm thick rubber moulded inter locking paver tiles incl.30 mm thick fine sand cusion bed in proper slope & camber including all material ,labour ,T&P etc. required for proper completion of the work.

Providing two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surface as per clause no. 803

Markings of centre line, Road edge lines on both side of Road with hot applied thermoplastic road marking paint material conforming to MORT&H clause 803.4.2 and marking complete as per clause 803 of MORT&H specifications 2004 (up to date revision)

Maintenance charge Repair for the period of 5 year from the actual completion of work. Maintainance of 1st Year (@0.00% of Total work amount 1 to 13) As per GO No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 दिनांक 16.01.2024 एवं मुख्य अभियन्ता (मु0-1), लो0नि0वि0, लखनऊ का पत्रांक: 3689सी-यूपीआरएमसी /मूल-23-24 दिनांक 17.02.2024

Maintenance charge Repair for the period of 5 year from the actual completion of work. Maintainance of 2nd Year (@0.25% of Total work amount 1 to 13) As per GO No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 दिनांक 16.01.2024 एवं मुख्य अभियन्ता (मु0-1), लो0नि0वि0, लखनऊ का पत्रांक: 3689सी-यूपीआरएमसी /मूल-23-24 दिनांक 17.02.2024

Maintenance charge Repair for the period of 5 year from the actual completion of work. Maintainance of 3rd Year (@0.50% of Total work amount 1 to 13) As per GO No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 दिनांक 16.01.2024 एवं मुख्य अभियन्ता (मु0-1), लो0नि0वि0, लखनऊ का पत्रांक: 3689सी-यूपीआरएमसी /मूल-23-24 दिनांक 17.02.2024

Maintenance charge Repair for the period of 5 year from the actual completion of work. Maintainance of 4th Year (@0.75% of Total work amount 1 to 13) As per GO No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 दिनांक 16.01.2024 एवं मुख्य अभियन्ता (मु0-1), लो0नि0वि0, लखनऊ का पत्रांक: 3689सी-यूपीआरएमसी /मूल-23-24 दिनांक 17.02.2024

Maintenance charge Repair for the period of 5 year from the actual completion of work. Maintainance of 5th Year (@1.00% of Total work amount 1 to 13) As per GO No. 17/2024/सा0-113/23-1-2024-23-1099/113/2023 दिनांक 16.01.2024 एवं मुख्य अभियन्ता (मु0-1), लो0नि0वि0, लखनऊ का पत्रांक: 3689सी-यूपीआरएमसी /मूल-23-24 दिनांक 17.02.2024

JAI SHAKTI CONSTRUCTION