Construction of Deputy Superintendent of Police Camp Office cum Residence with development works at Erode in Erode District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.5 : Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

1.6 : Earth work excavation for Open foundation for drains (excluding refilling) width upto 1.25 m a. 0 to 2 mt.

1.8 : Earth work excavation for Open Foundation in soft disintegrated rock, laterite Kankar or soft rock not requiring blasting (Excluding Refilling). b. 2 to 3 mt.

c. 3 to 4 mt.

2.6: Supply and Filling of 40mm HBSJ

2.7: Supply and Filling of 20mm HBSJ

7.2 : Supply and fixing of Bituminous filler pad, 20 mm tk. for expansion joint

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

37.1 : White washing 3 coats (slaked)

39 : M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

52.1 : Supplying and fixing of 20mm dia "B" Class GI pipe for Hot water line (Fully Concealed in walls)

53.3 : C.I. Steps ( 5 kg)

61.2 : Stoneware pipe dry condition a. 100mm dia

62.2 : Stoneware Tee a. 100mm dia

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

73.1 : 6 way - D.B

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

77.3 : S&F of TV/Telephone line Socket

77.4 : S&F of 20mm dia PVC pipe for TV/Telephone line

78 : Earthing Station IS3043 (Type I)

81 : Meter cupboard

86 : Anti termite treatment

112 : S & F of Exhaust Fan 300mm dia

ANNEXURE 2.1.1 : Supplying and filling with Gravel

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

3.8.1 : P.C.C. 1:4:8 using 40 mm HBGS Jelly (using crushed stone sand)

3.9.2 : P.C.C. 1:3:6 for Foundation & Basement using 20 mm metal (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) using Fly ash bricks of size 230x11x70mm (using crushed stone sand)

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In Ground Floor

c) In First Floor.

d) In Second Floor.

9.2.1.1 : Brick work in C.M. 1:6 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) a. In Ground Floor

b. In First Floor

c. In Second Floor

10.2.1.1 : Brick partition work in C.M. 1:4 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) 110 mm tk (B.P.) a. In Foundation and basement

b. In Ground Floor

c. In First Floor

d. In Second Floor

11.2.1.1 : Brick Partition work in C.M. 1:4 using Fly ash bricks of size 230x11x70mm (using crushed stone sand) 70 mm tk (B.P.) a. In Ground floor

b. In First floor

12.1.1 : Brick partition work in C.M. 1:4 using country bricks of size 22 x11x5cm 50 mm thick (using crushed stone sand) a. In Ground floor

b. In First floor

14.1.1.I : Precast Cupboard slab 20 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Ground floor / stilt floor

b. In First floor

14.1.1.II : Precast cupboard slab 40 mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Foundation & basement

b. In Ground floor / stilt floor

c. In First floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

d.Vertical wall

f.Curved Surface

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

22.2.1 : Teak wood window & Ventilator shutter with 4mm thick pin headed glasses. a.Window 135 cm ht.

c.Window 105 cm ht.

d.Ventilator (75 x 75 cm) Swing type

22.3.3 : TW frame & TW styles & rails with BWR double leaf shutters for cup board/ wardrobes including one coat primer & two coats enamel paint.

22.7.1 : T.W French window a) FW0 (2.10 x 2.00m) Three bay operatable

b) FW1 (1.50 x 2.00m) Two bay operatable

c) FW2 (1.20 x 2.00m) Two bay operatable

d) FW (1.35 x 2.00m) Two bay operatable

23.1.1 : TW styles & rails with 9mm thick BWR single leaf shutters with brass screws following size a) 1000 x 2100 mm

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand)

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles (antiskid) using Grout (Tile Joint Filler) (using crushed stone sand)

31.2.1 : Finshing the top of Terrace floor with one course of solar reflective Ceramic tiles with base concrete

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand)

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand)

35.1.1 : Plastering 1:3, 12mm with WPC (using crushed stone sand)

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand)

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

38.6 : One coat white cement for new walls and other similar works.

38.7 : Plastic Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1 : Rain water harvesting using defunct borewell and providing perforated cover slab (M 20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.3.1 : Supply and planting avenue trees (using crushed stone sand)

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4 : 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight)

53.5.2 : Wash Hand Basin of size 550 x 400 mm (without pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

56.4.2: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - other than G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4 : Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

58.5 : PVC (SWR) pipe with ISI mark - type 'A' for Ventilating shaft with cowl

59.2.1 : Gully Trap using country Burnt bricks of size 23 x 11.4 x 7.5 cm (9" x 4 1/2"x 3") (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

62.1.1 : PVC Specials as per IS 10124/1982 Part II a. 110 mm dia PVC bend

62.2.2 : PVC Equal Tee as per BIS 7834/1975 a. 110 mm dia PVC Equal tee

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point.

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself.

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places.

71.2 : Supplying and fixing of 32 AMPS Triple pole main switch.

75.1.2 : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.2.1 : S & F of 20 amps DP plug & Socket in sheet enclosure with 32 A DP MCB in flush wall with earth connection(For AC Plug) superior variety

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

79.2.1 : S & F of 3 Nos.of 32 Amps - Fuse unit.

80.1 : S & F of 450 x 375 x 20mm thick TW plank

85.1 : Supply of G.I pipe 40mm dia 'B' Class

87.1 : Supplying and delivery of Three phase ELCB/RCCB

98.2.1 : TW panelled door shutter (with brass fittings) a. 900 x 2100mm. (Single leaf)

98.2.1.1 : TW panelled door shutter (with brass fittings) c. 1200 x 2100mm. (Single leaf)

98.2.1.2 : TW panelled door shutter (with brass fittings) b. 1050 x 2100mm. (Single leaf)

98.3.2 : TW panelled door shutter (with brass fittings) a. 1500 x 2100mm. (Double leaf)

105.1 : 4 x 4 Sq mm copper PVC insulated unsheathed single core cable for 3 phase EB service connection

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361 : Concrete Designer Tiles flooring (using crushed stone sand)

361.5.1: Vitrified Tiles flooring (ivory) (using crushed stone sand)

367 : Providing wooden (melamine) polish for new wood

379.4.2.1 : S & F of superfine polished with machine cut edges (Jet black) of size 4' x 2' of Granite slab 18 to 20mm thick (using crushed stone sand) For kitchen arrangements.

383.4 : providing full round nosing to the edges of granite slab.

383.4.1 : S&F of stainless steel sink 550 x 450 x 200mm

384: S&F of PVC flushing cistern

448.2: Supply and fixing 32mm dia PVC Tee with end cap

799 : Two coat of OBD over one coat white cement for inner walls

ANNEXURE II A1) Supplying and applying of Full wall patty one coat with approved make wall patty for smooth finishing

A2) Supplying and fixing of 9 Watts LED bulbs

A3) Supplying and fixing of 4' long 18 Watts LED tube light with fittings

A4) Supplying and fixing of 12 Watts LED bulbs

A5) Supplying and fixing of Bulk head fittings suitable for 12W bulb.

A6) Supplying and fixing of 25" LED street light with fittings

A7) Drilling of 150mm dia deep borewell in hard rock including drilling of 180mm pilot bore well

A8) Supply, delivery and fixing of 160mm outer dia PVC casing pipe of 6kg/cm.Sq

A9) Supply and fixing of 160mm dia PVC end cap

A10) Supply and delivery of 5 HP bore well Submersible motor Duty condition 100 lpm x 100m

A11) Supply and delivery of 2 HP open well Submersible motor

A12) Supply and delivery 3 core of 4 sqmm Flat copper cable

A13) Supplying and laying and jointing the 25mm dia GI pipe of approved quality ( Below Ground Level)

A14) Supplying and laying and jointing the 25mm dia GI pipe of approved quality ( Above Ground Level)

A15) Supply and delivery of Three phase panel Board with two level guard auto start with ISI mark wall mounted type For 5 HP submersible Pumpset

A16) Supplying and Fixing of MS fabricated DOL 3 phase Panel control Board of wall mounting type for borewell/Open well submersible motor For 2 HP submersible Pumpset

A17) Supplying and delivery of following dia "U" PVC pipes. a) 32mm dia UPVC column pipe

A18) Supplying and fixing of GI /CI specials of approved quality with ISI mark. a) 32mm dia C.I adopter

b) 32mm dia G.I coupling

c) 32mm dia G.I Bend

A19) Supply and fixing of 50mm dia MS bore well clamp set

A20) Supplying and laying and jointing the following dia GI pipe of approved quality (Above GL ) a. 32mm dia

A21) supplying and fixing of following dia GI/GM specials of approved quality a) 50 mm dia GI coupling

b) 50 mm dia GI Bend

c) 50mm dia GM gate valve (Heavy)

d) 50 mm GI Elbow

e) 50mm GI union

f) 25 mm dia GI coupling

g) 25 mm dia GI Bend

h) 25 mm GI Elbow

A22) supplying and fixing of following dia PVC specials of approved quality a) 50mm dia PVC coupling

b) 50mm PVC MTA

c) 50mm dia PVC elbow

d) 50mm dia PVC Bend

e) 50 x 40mm PVC reducer

f) 40 x 32mm PVC reducer

A23) Supplying, delivering and fixing of 16mm thick Nylon Rope for bore well

A24) Supplying and laying and jointing the following dia PVC rigid pipe 10kg/sq.cm of approved quality ( Below GL) a) 50 mm dia PVC pipe

b) 40 mm dia PVC pipe

A25) Labour charges for the erection of submersible pumpset in borewell / openwell upto 5 HP

A26) Supplying and fixing of TNPHC Emblem & Aluminium die casting letters including all cost of materials and labour charges. a) TNPHC Emblem (2')

b) 12" dia letters

c) 6" dia letters