Replacement to damaged door, window shutters at Kuchana Housing Complex of Majri Area.

Amount

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make andmanufacture. M.S. frame covered with 5 mm thick heatmoulded PVC 'C' channel of size 30 mm thickness, 70 mmwidth out of which 50 mm shall be flat and 20 mm shallbe tapered in 45 degree angle on both side forming stylesand 5 mm thick, 95 mm wide PVC sheet out of which75mm shall be flat and 20 mm shall be tapered in 45degree on the inner side to form top and bottom rail and115 mm wide PVC sheet out of which 75 mm shall be flatand 20 mm shall be tapered on both sides to form lockrail. Top, bottom and lock rails shall be provided bothside of the panel. 10 mm (5 mm x 2 ) thick, 20 mm widecross PVC sheet be provided as gap insert for top rail &bottom rail, paneling of 5 mm thick both side PVC sheetto be fitted in the M.S. frame welded/ sealed to thestyles & rails with 7 mm (5 mm+2 mm) thick x 15 mmwide PVC sheet beading on inner side, and joinedtogether with solvent cement adhesive. An additional 5mm thick PVC strip of 20 mm width is to be stuck on theinterior side of the 'C' Channel using PVC solventadhesive etc. complete as per direction of Engineer-incharge,manufacturer's specification & drawing. 30 mm thick plain PVC door shutters

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steelprimer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Kiln seasoned and chemically treated hollock wood 35 mm thick shutters

Providing and Fixing solid cone 18 mm thick Bison panel cement bonded partical board including teak wood bidding on the four edges in selves of door. As per detaited drawing and instruction of Engineer in Charge.

Providing and Supplying 12 mm thick BWP plywood ( ISI mark) approved brand as per direction of Engineer incharge

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates atthe junctions and corners, all necessary fittings complete,including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.200x10 mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc.100x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Total impact of GST for the purpose of CTC

GEETA SINGH

Nitikesh Damodhar Tagselwar

AJIT KUMAR YADAV

SANTOSH KHOLGADE