CLEANING/REPAIR OF SEWAGE LINES, MANHOLES, SEPTIC TANKS, SOAK WELL AND CONNECTED WORK AT KATRE VIHAR AND OMQ AREA, REPAIRS/MAINT OF SUNKEN, FLOORING AND ALLIED WORKS IN KV AREA, REPAIRS/MAINT PLUMBING AND SANITARY FITTING AND ALLIED WORKS AT KV AREA

Amount

Taking out/bailing out the sludge/semi solid materials/contaminated water including other foreign materials from manholes of various sizes and upto any depth as required by mechanical means and taking out sludge/ semi solid materials/any other foreign materials from manholes etc and removing the sludge within 50m distance and deposited in a pit to be excavated and covered with earth filling upto 30cm depth of pit including removing and refixing of manhole covers as required and spreding of unslacked lime powder to disinfect the area cleaned, complete all as specified and directed. (Note: (i) The cost of Excavation and earth work for pit, temporary barricade of the pit and providing sufficient unslacked lime powder shall deem to be included in the unit quoted rate (ii) Hiring charges and cost of fuel for sewage pump shall deemed to be included in the unit quoted rate and nothing extra shall be paid on this account)

Cleaning of blockage in sewage lines/drain pipes of the internal dia 100mm/150mm/200mm by rodding or by any other suitable means and cleaning the entire line and well flushing with water between the manholes, complete all as specified and directed.

Cleaning of blocked WC's and soil pipes of any dia up to first manhole by rodding or by any other means and well flushing with water the entire line after cleaning, complete all as specified and directed.

Cleaning of blocked floor/gully/nahani trap in bathroom/kitchen/wash basin etc and soil waste pipe of any dia upto gully traps by using rubber hand pump or rodding and making the line clear for smooth functioning, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep for foundation, etc, and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches exceeding 1.5m depth but n.exc. 3m deep for foundation, etc, and getting out in soft/loose soil, complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

Returning filling in including spreading, leveling, watering and well ramming in layers n.exc 25cm, complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 100mm dia of pipe, complete all as specified and directed.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete (1:2:4) type B1, smooth finished and reforming benching as required for 150mm dia of pipe, complete all as specified and directed.

Demolition and breaking up 100mm dia drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal of unserviceable materials, debris and rubbish off to a distance not exceeding 100m, complete all as specified and directed.

All as per item No.11 here-in-above but for 150mm dia. pipe, complete all as specified and directed.

All as per item No. 11 here-in-above but for 200mm dia. pipe, complete all as specified and directed.

M & L for PCC (1:3:6), type C 2, (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100mm bore of pipe, complete all as specified and directed.

All as per item No.14 here-in-above but for 150mm dia. pipe, complete all as specified and directed.

All as per item No.14 here-in-above but for 200mm dia pipe, complete all as specified and directed.

M & L for 100mm dia re-inforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed.

All as per item No.17 here-in-above but for 150mm dia pipe, complete all as specified and directed.

All as per item No.17 here-in-above but for 200mm dia pipe, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 100m and disposal of unserviceable materials, debris and rubbish off to a distance not exceeding 100m, complete all as specified and directed.

M & L for brick work with sub-class ‘B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4), complete all as specified and directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:4) but except bricks (brick obtained from demolition shall be re-used). Unit rate for cleaning of old bricks shall be included in this item), complete all as specified and directed.

M & L for plain cement concrete type B-0 (1:2:4) (using 12.5mm graded crushed stone aggregate) cast in situ in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work, complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water etc and removing rubbish off the premisses, complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions (WPC shall be measured & paid separately), complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement including mixing of liquid water proofing compound as per manufacturers instructions (WPC shall be measured & paid separately), complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash including preparation of surfaces, complete all as specified and directed.

Supply only integral liquid water proofing compound of approved quality, complete all as specified and directed. (Make- CICO NO.1/SIKA/ACCO PROOF/Dr. FIXIT)

Demolition of reinforced cement concrete of any description and in any position, disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m (reinforcement shall be cut as required to facilitate demolition), complete all as specified and directed.

M & L for precast reinforced cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in cover slabs (for manholes etc) and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed.

S & F mild steel TMT bars 6mm to 8mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia., or securing with clips quality confirming to Fe-410-S or Fe-410-O, complete all as specified and directed.

S & F CP grating 125mm dia with waste hole of PTMT. (minimum weight 40 grams), complete all as specified and directed.

Taking down soil/waste vent and rain water pipes including all fittings of any size and pattern in any position, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls,complete all as specified and as directed.

All as per item No 34 here-in-above but except pipes (serviceable pipes obtained from item No 33 shall be re-used), complete as specified and directed.

S & F 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls, complete all as specified and directed.

All as per item No 36 here-in-above but except pipes (serviceable pipes obtain from item No 33 shall be re-used), complete as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius with access door, complete all as specified and directed.

S & F 110mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door, complete all as specified and directed.

S & F 110mm bore PVC (SWR) junction single (Single `Y') equal or unequal with access door, complete all as specified and directed.

S & F in repairs, PVC (SWR) 75mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description not otherwise specifically provided for and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed.

Cleaning the surfaces of brick/RCC using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite (pidifine 2K) @ 0.50 kg/sqm, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:3) using water proofing compound @ 3% by weight of cement in sunken portion, complete all as specified and directed. (WPC shall be measured and paid separately)

M&L PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

M&L 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

S&F in repair vitreous china squatting pan ,"Orissa pattern" white, size 580x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, CI anti-syphonage pipe, complete all as specified and directed.

S & F in repair vitreous china wash down water closet (pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and directed.

S&F PVC(SWR) floor trap, plain with grating including jointing with plain cement for 75mm bore pipe, complete all as specified and directed.

S&F PVC(SWR) gully trap of size 125/110mm, setting and jointing with solvent cement, complete all as specified and directed.

S & F in repair nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B1, complete all as specified and directed

S&F in repairs 10 litres capacity, low level flushing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe, complete all as specified and directed.

Supply only flush pipe of polythene of low or high density, 32mm PVC for low level flushing cistern, complete all as specified and directed

PVC connection pipe 15mm size with PTMT nuts of length 450mm, complete all as specified and directed

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement, complete all as specified and dircted.

M & L for rendering 5mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) and finished fair and even without using extra cement on ceiling, complete all as specified and dircted.

M & L for preparing newly plastered surfaces of walls and applying three coats of white wash.on ceiling, complete all as specified and dircted.

M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and dircted.

M & L 75mm thick plain cement concrete (1:3:6), type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement, complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed..

M & L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 15mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

M&L for providing glazed ceramic coloured tiles in vertical surfaces (450mm x 350mm/300mm X 450mm) X6 to 7mm thick set and in jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in CM (1:4) as backing coat to receive wall tiles, complete all as specified and directed.

Taking up or down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection 15mm bore in new or old position complete on wall/ceiling, complete all as specified and directed.

S&F GI steel water tubing and connection medium grade 15mm bore with all fittings, fixed to wall or in ceiling, complete all as specified and directed.

Taking up or down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F GI steel water tubing and connection medium grade 20mm bore with all fittings fixed to wall or in ceiling, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling, complete all as specified and directed.

S&F in repairs 15mm bore fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

All as per item No. 70 here-in-before but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and directed.

Supply and fix in repairs, angle stop valves, 15mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or unions etc, complete all as specified and directed.

S & F in repairs 15mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs brass chromium plated shower roses 125mm size, complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550x 400 mm including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning in ends of brackets etc including dismantling the existing basin, complete all as specified and directed.

S&F in repair CP pillar tap 15mm bore with capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repair PVC waste pipe for urinal/ WHB 32mm/ 40mm bore with one end with socket, complete all as specified and directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed.

S&F in repair kitchen sinks made of stainless steel with draining board 1mm thick with plugs and wastes including in cement mortar onto dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed. Make : - Pryag/Nirali or equivalent make approved by GE

S&F in repair kitchen sinks made of stainless steel 1mm thick with plugs and wastes including in cement mortar onto dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mmx410mm bowl size 410mmx330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed. Make : - Pryag/Nirali or equivalent make approved by GE

S&F stainless steel plate rack of size 0.75 x 0.78m standard quality weight not less than 6 kg fixed with brass screws, complete all as specified and directed. Make : - Pryag/Nirali or equivalent make approved by GE

S & F in repairs towel rail, 60cm long PTMT including chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (triple layer) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm nipple suitable for HDPE water tank and Ball valves high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling/taking down of old water tank of any description, complete all as specified and directed.

S & F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed(minimum weight 20mm-210gms), complete all as specified and directed.

S&F in repair tank cover suitable for any type of rotational moulded polyethylene water storage tanks, complete all as specified and directed.

S&F in repairs 32mm waste coupling of PTMT suitable for WHB (half or full threaded) (minimum weight -45 gms), complete all as specified and directed.

S&F in repairs 40mm waste coupling of PTMT suitable for ktchen sink (half or full threaded) (minimum weight -60 gms) complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repairs grating round 140mm size of PTMT, complete all as specified and directed.

S&F in repairs PVC connection of 15mm size with PTMT nuts of length 600mm long, complete all as specified and directed.

S&F in repairs internal assembly incl valveless syphon for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repairs handle for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repairs inlet ball valve for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repairs float for 10 ltrs PVC flushing cistern, complete all as specified and directed.

S&F in repairs down take pipe 32mm dia PVC flexible type for wash hand basin, complete all as specified and directed.

S&F in repairs down take pipe 40mm dia PVC flexible type for sink, complete all as specified and directed

M&L for PVC(SWR) floor trap, plain with grating including jointing with plain cement for 63mm, complete all as specified and directed.

M&L for first class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to store, complete all as specified and directed.

S&F in repairs 2nd class hardwood plain fillets, square, ractangular or triangular in section area exc. 3 Sqcm & n.exc. 6 Sqcm clean sawn, secured with nails, complete all as specified and directed.

S&F in repairs 2nd class hardwood plain fillets, square, ractangular or triangular in section area exc. 13 Sqcm & n.exc. 25 Sqcm clean sawn, secured with nails, complete all as specified and directed.

Supply and fixed in repairs second class hard wood 15mm thick boarding clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replacing old or decayed boarding in patches including cutting out old, piecing, heading joints, etc., complete all as specified and directed.

S&F 25mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, fixed in repair, complete all as specified and directed

S&F 18mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work fixed with screws/self tapping screws etc, fixed in repair, complete all as specified and directed.

S & F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F in repairs 100mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 150mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed.

S&F in repairs 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts, complete all as specified and directed.

S&F in repairs 75mm size butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repairs 100mm size butt hinges, medium weight cold rolled mild steel, complete all as specified and directed.

S&F in repairs continuous (piano) hinges, mild steel, bright finish or galvanised width of flaps when open 30mm, complete all as specified and directed.

S&F in repairs mild streel helical door spring 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F in repairs 150mm long extruded aluminium alloy handles, fabricated type, handles, cast type anodised, complete all as specified and directed.

S&F in repairs 100mm long extruded aluminium alloy handles, fabricated type,anodised aluminium, handles, cast type anodised, complete all as specified and directed.

S&F in repairs mild steel handles for MS windows/vents 75mm long suitable for left/right hand including fixing nut & bolts side, complete all as specified and directed .

S&F in repairs cast iron casement stays, size 300mm, with hinged joint and two plates, with studs suitable for MS windows and vents, complete all as specified and directed .

S&F in repairs hasp and staple, aluminium anodised safety type with hinge pin incl bolt to hinge plate with screw 75mm size, complete all as specified and directed.

S & F curtain rod of 25mm dia MS, CP with fixing brackets, stops, rollers etc as fixed in repairs, complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing new pins/spring clips, complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty or wooden beads in square n exc 0.5 Sqm in each panel, complete all as specified and directed.

All as per item No 123 but here in above but frosted glass on one side, complete all as specified and directed.

S&F for aluminium extruded door closer hydraulically regulated,designation No. 1 universal type, suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed in repair, complete all as specified and directed.

Repairs to aluminium doors, windows, ventilators etc of any size by replacing its faulty parts like jointing cleats, glazing clips, rubber packing etc to bring its functional conditions, complete all as specified and directed.

S & F in repairs floor door stopper 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overal length of cover plate, complete all as specified and directed.

S & F in repair 2mm thick ruberised door seal, width exc 30mm but n.exc 50mm fixed with screws, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description n. exc 1 Sqm each, complete all as specified and directed.

Resecuring or easing and adjusting without taking down shutters of any description exc 1 Sqm and n. exc. 2 Sqm each, complete all as specified and directed.

M & L for plastering in patches in CM (1:6) to wall, ceiling, and finishing the surface, complete all as specified and directed. Note :- Quoted rate includes taking down cement plaster, applying adjacent finishes removal of debris and cleaning the area complete.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. Note: An amount of Rs.36753.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. NARENDRA KUMAR GARG

M/S. JOGINDER KUMAR GOYAL

BHARAT ELECTRIC

M/S BISHAL ENTERPRISES

M/S RATHIN ENTERPRISES

M/S. KUMAR CONSTRUCTION CO.