Loading
Loading…
Loading…
Tender Value
₹12.5 L
EMD Value
₹24,939
Closing Date
16 Oct 2026, 3:00 pm7d left
EE,CD,APWD,CAR NICOBAR
Office of the Executive Engineer Construction Division APWD,Car Nicobar
Repair and Renovation of 01 No. Type IV Quarter Qtr. No. PK 540 48 under Medical Department at Perka, Car Nicobar.
2026_APWD_25067_1
e-Tender-DB/CD/CN/2026-27/2453
Open Tender
Civil Works - Buildings
Percentage
180 days
At Car Nicobar
Please refer Tender documents.
4 documents required · 4 mandatory
₹0
₹24,939
Yes
8 Oct 2026
8 Oct 2026
16 Oct 2026
8 Oct 2026
16 Oct 2026
9 Oct 2026
9 Oct 2026 - 10 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||||
| 1.01 | 300x16 mm | 4 | each | 556.65 | ₹2,226.6 |
| 2Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
| 2.01 | 250x10 mm | 5 | each | 161.05 | ₹805.25 |
| 3Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete | |||||
| 3.01 | 100 mm | 4 | each | 86.65 | ₹346.6 |
| 4Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | |||||
| 4.01 | Twin rubber stopper | 5 | each | 196.1 | ₹980.5 |
| 5Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). | |||||
| 5.01 | 6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 :2000 | 136 | sqm | 1,079.8 | ₹1,46,852.8 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.02 MB
TenderDocument01.pdf
Tender Documents • 1.40 MB
BOQ_26521.xls
BOQ • 0.36 MB
Instructions-to-bidders.pdf
Additional Documents • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .