ADDN ALTN TO CERTAIN LIVING IN ACCN AT 21 WG UNDER GE AF LEH

M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate) Set in cement mortar 1:6 including demolition of Precast concrete block masonary and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) including Taking down cement or cement lime plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish off the premises complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less tthan 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces.

Preparation of new plastered surfaces of walls and applying two coat of distemper oil emulsion white or tinted on walls over a coat of chalk whiting on plastered surfaces ,preparatory to distempring complete all as specified and as directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and as directed.

Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper on walls complete all as specified and as directed.

Preparation of old decorated wooden surfaces of ceiling and applying one coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of cement base paint on walls complete all as specified and as directed by Engineer-in-Charge.

M&L Non - skid /Anti Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including Screed bed or bedding layer of mortar 15 mm 1:6 thick for laying floor finishes and Dismantling of floor tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.