REPAIRS/ REPLACEMENT OF PARTITION WALL, ALUMINIUM DOORS, UPVC WINDOWS,VENETIAN BLINDS AND CONNECTED B/R WORKS AT DMRL, ATC DEVATALGUTTA, RCMA (MAT), DSC LINE ATC DEVATALGUTTA AND PCDA AT KANCHANBAGH, HYDERABAD

S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make onforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, traight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, including provision of sheet glass 5.5 mm thick and 12 mm thick particle board prelaminated on both side with decorative choice lamination, 25 micron sun control film, aliminium legs, aluminium galzing channel,beading, complete all as per architectural drawings and the directions of Engineer-in-Charge.

S&F Powder coated (thickness powder coated not less than 50 micron) aluminium door shutter with frames, aluminium section weighing 0.55kg/mtr incl necessary joining cleats,glazing clips rubber neoprene packing,handles 2nos in each door, hinges 2 Nos/rollers,anodised aluminium snap beading screws, 5.5 mm thick sheet glass with 25 micron sun control film, 12mm thick particle board prelaminated decorative both side, 6 levers lock etc,including takingdown old unserviceable old any type of door complete all as specified and directed

M&L Powder coated (thickness of powder coating not less than 50 micron) aluminium window shutter with frame type/sliding as directed, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aliminium snap beading screws etc including provision of sheet glass 4 mm thick of selected quality and 25 mircon sun control film reflective type sticked to glass pane as per manufacturers instructions,including taking down old unserviceable existing window complete all as per specified and directed.

S&F powder coated aluminium grills of weight between 2.5 to 3 kg/sqm to aluminium window etc incl taking down old grills complete all as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube including taking down old frame complete all as specifed and as directed. Make RAJSHREE / Sintex

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site including taking down old shutter complete all as specifed and as directed.

M&L pressed steel frames size 125 x 60mm for doors with one or more rebates incluidng necessary fixing lugs, hinges lock strike plate, etc including PCC 1;2:4 in frame incl taking down old frame complete as specified and directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing confirming to Fe 410-0 complete including dismantling of steel work complete all as specified

S & F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels covered both face with 0.9 mm thick decorative face veneer with lipping / frame to match complete including taking down old shutter complete

S&F 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass / glaze etc (without sash bars), edges of framing plain/ chamfered or rounded. Fitted with cut and mitered beads for securing glass etc: sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24(a) including taking down old shutter of area not exc 2 Sqm each complete all as directed.