GE S U 41 2022 23 PROVN OF STAGING AND CAGING OF WATER TANK ADDN ALTN

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in sub base finished fair for receiving floor finishes complete all as specified and as directed.

Non skid ceramic joint free tiles 7 to 10 mm thick area of each tile exceeding 0.11 sqm and nexc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the slurry including screed bed or bedding layer of mortar 15 mm thick for laying floor tiles in CM 1:6 complete all as specified and as directed.

Glazed ceramic tiles in Vvertical surface 300mm x 600mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat on vertical surfaces such as skirting/dado in CM 1:4 for laying tiles complete all as specified and as directed.

Double charged vitrified ceramic tiles, area of each tile exc 0.18 sqm but not exc 0.36 Sqm , 10mm thick (square or rectangular) of superior quality as in floor and walls surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade/colour of tiles including screed bed of 15mm thick in CM 1:6 complete all as specified and directed.

Solid PVC Wall lining consisting of 5mm thick woodgrain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including PVC fillets complete all as specified and as directed.

Taking down cement plaster on brick/stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished fair and even without using extra cement complete all as specified and as directed.

Rendering 15 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick in CM 1:3 on ceiling and exposed surface of concrete finsihed even and smooth without using extra cement complete all as specified and as directed.

New plaster surface of walls/ceiling surface and applying two coat of oil bound distemper over one coat of primer and two coat of wall care putty complete all as specified and as directed.

Preparation of new plaster surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a two coat of wall care putty with coat of primer up to G+1 floor height etc complete all as specified and as directed.

Complete removal of existing treatment of wall surface and applying two coat of plastic emulsion paint (Shade as approved by GE) over two coat of wall care putty complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n.exc 4 Sqm each and removing to store complete all as specified and as directed.

125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and as directed.

35 mm thick flush shutter ,solid core construction, with block board core and plywood face panels, commercial type complete all as specified and as directed.

200mm long aluminium anodised barrel tower bolt of extruded section in old or new position complete all as specified and as directed.

Aluminum alloy anodised sliding door bolt 300 mm size in old or new position complete all as specified and as directed.

100mm size mild Steel butt hinges medium weight cold rolled complete all as specified and as directed.

150 mm length Aluminium handles fabricated type anodised complete all as specified and as directed.

Two coats of synthetic enamel paint on new wooden surfaces over a coat of pink primer complete all as specified and as directed.

One coat of synthetic enamel paints on old steel surfaces including preparation of surfaces complete all as specified and as directed.

3 mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc complete all as specified and as directed.

Preparation of new wooden surfaces of any description ,not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

PVC moulded door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening complete all as specified and as directed.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site complete all as specified and as directed.

Looking mirror 5.5 mm thick of Make' Modiguard' or 'Ashash' mounted on 5mm thick PVC Sheet including power coated aluminium beadinng of approved pattern complete all as specified and as directed.

Bib taps with wall flange chromium plated as in repairs complete all as specified and as directed. (Make Jaquar CAT Part No : VGP-81037)

Angular stop cock with wall flange as in repairs complete all as specified and as directed. (Make Jaquar CAT NO : VGP-81053)

Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete all as specified and as directed.

Towel ring square with round flange complete all as specified and as directed. (Make Jaquar CAT Part NO :ACN-1121N)

Soap dish holder incl all fittings as in repairs complete all as specified and as directed. (Make Jaquar CAT Part No: CAN 1131N)

Hand shower (Health faucet) with 8 mm dia , 1mtr long flexible tube and wall hook as in repairs complete all as specified and as directed. (Make Jaquar CAT Part No : ALD-573)

Toilet paper holder as in repairs complete all as specified and as directed. (Make Jaquar CAT Part No : CAN 1155N)

Towel rack 600 mm long with out lower hangers but with three hooks complete all as specified and as directed. (Make:- Jaquar CAT Part No: CAN 1181N).

Glass shelf 600 mm long with holding brackets as in repairs complete all as specified and as directed. (Make Jaquar CAT Part No: CAN 1171N)

Counter type vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete all as specified and as directed.

Water closet Pedestal pattern colour (as approved by GE) flush fitting including pvc connection complete all as specified and as directed. Make CERA CAT PART No (EWC 2015 cistern 2115 Seat cover 2315 Twin flush cistern 2205/BT TWIN CLAIR DELUXE

Reinforced cement concrete 1:2:4 type B-1 , (using 20 mm graded crushed stone aggregates) as in slab supported on walls, beams and columns, in floors,roofs, and shelves and the like complete all as specified and as directed.

Form work to soffits of suspended slabs such as roof slabs floor slabs and similar work n.exc 200mm thick finished rough complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with MS wire annealed not less than 0.9mm dia complete all as specified and as directed.

Granite (of any type) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including griding and polishing types complete all as specified and as directed.

Dismantling of PVC Pipes of dia 75/110 mm complete all as specified and as directed.

110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

110 mm PVC (SWR) bends any redius with access door complete all as specified and as directed.

20mm bore steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, including taking down old pipe complete all as specified and as directed.

15mm bore steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, including taking down old pipe complete all as specified and as directed.

Double charged glossy finish Vitrified ceramic tiles Dark Shade 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.42 sqm but not exc. 1.00 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed in CM 1:4 complete all as specified and as directed.

10-12 mm thick gypsum boards seamless false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rawl plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface complete all as specified and directed.Note : (a) GI grid/hanging system shall be of the same make as of false ceiling manufacturer

Venetian blinds as approved by GE make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and as directed. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net Opening will be measured for payment purpose.) (A) Area not exceeding 2.00 sqm each

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Wash hand basin oval white 665mm x 495mm including connected accessories as in repairs complete all as specified and as directed. Make:CERA CAT PART No. (WHB-1028) or equivalent in Cera/Somani

PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and as directed.

Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified and as directed.

Urinal spreader of brass CP for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and as directed.

S&F in repair water closet Pedestal pattern colour as approved by GE Make CERA CAT PART No (EWC 2015 cistern 2115 Seat cover 2315 Twin flush cistern 2205/BT TWIN CLAIR DELUXE flush fitting including PVC connection complete all as specified and as directed.

1000 Litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm dia float valve complete all as specified and as directed.

PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in base of water tank on roof surface, bed block, hold fast and similar work complete all as specified and as directed.

Rolled mild steel sections as in frame work for water tank staging, main and cross beams hip and jack rafters, purlins fixed independently the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates and welding etc complete all as specified and as directed.

4mm dia galvanised steel wire 150 mm x 100 mm mesh made up in to matresses or cages etc complete and specified and as directed.

75mm size Butt hinges, medium weight, cold rolled mild steel welded to frames complete and specified and as directed.

Preparation of new steel surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

20mm bore Gun metal globe or gate valves high pressure with polythene float and fly nut as in repairs complete screwed for iron pipe or for unions complete all as specified and as directed.

15mm bore Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions as in repairs complete all as specified and as directed.

Disconnecting existing tanks of exc 250 ltr but n.exc 500 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position with cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

Disconnecting existing tanks of exc 500 ltr but n.exc 1000 ltr capacity setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position with cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes etc complete all as specified and as directed.

S&F in repair 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes and fixed for iron pipes complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks 500 ltrs(cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I and including 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes dismantaling of existing damaged water tanks complete all as specified and as directed.

S&F in repair Rotational moulded polyethylene water storage tanks 1000 ltr (cylinderical Vertical with closed top) hoisted and fixed in position all as specified in SSR part I and 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipes including dismantaling of existing damaged water tanks complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc including removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 kg/Sqm and applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats of bituminious aluminium paint complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. Make:Havells/polycab/Finolex

All as per srl item No 83 but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 84 but for 3 pin 6 Amps socket outlet on the same board including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 84 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner/outer plate complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC, with inner/outer plate complete all as specified and directed by GE. Make: Havells/ Legrand/Indoasian Elvira

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed. Make: Havells/ Anchor/Indoasian

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

Supply and fixing LED lights fitting 1x 22W, 230V,AC decorative box type warm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. .Make - Havells/ Wipro/Syska

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 08 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately) Make:- Havells/ legrand/ Indo Asian.

MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed.. Make:- Havells/ legrand/ Indo Asian.

MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead complete all as specified and as directed. Make:Havells/polycab/Finolex

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed. Make:Havells/Bajaj/CG

Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator of complete all as specified and as directed. Make:- Havells/ legrand/ Indo Asian.

Socket 2-in-1, 3 Pin 6 Amps (Modular Type) with outer strip complete all as specified and as directed. Make: Havells (Crabtree) / Legrand/ Philips

Ceiling rose surface bakelite 3 terminals complete all as specified and directed. Make : Cona Cat Tart No 2126/SSK Cat Part No 572 or equivalent Make: Havells/ Legrand/ Polycab

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

LED light fitting 1 x 9W/1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and as directed. Make: Havells (Crabtree) / Legrand/ Philips

Supply and fixing LED lights fitting 1x 22W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

SINGH CONST CO

RAJ MOHD

VIRINDER SINGH

PARDEEP SHARMA

joginder singh and sons

VISHWANATH AND SONS