Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹6.5 L+₹68,199 (11.7%)Rejected-Finance | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹6.6 L+₹81,200.20 (13.9%)Rejected-Finance 1001 63 SHALIMAR GARDEN ISMAILGANJ NEAR INDIRA NAGAR SECTOR 08 CROSSING LUCKNOW 226016 | LUCKNOW | UTTAR PRADESH | 226016 | L3 | Rejected-Finance Being not lowest | |
| 4 | L4₹7.0 L+₹1.1 L (19.1%)Rejected-Finance HOUSE NO 39 KRISHNA VIHAR OPPOSITE KV AIR FORCE MANAURI DISTT PRAYAGRAJ UP 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L4 | Rejected-Finance Being not lowest |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Pranav, AGE (I)
AGE (I) Manauri Prayagraj-212212
REPAIR TO ROLLING SHUTTER AND ALLIED WORKS AT AF STN MANAURI
2023_MES_618906_1
9100/E8
Open Tender
Civil Works
Item Rate
182 days
Manauri, Allahabad
As per tender docs
7 documents required · 7 mandatory
₹500
AGE (I) AF Manauri
₹18,000
Yes
23 Nov 2023
15 Sept 2023
14 Oct 2023
15 Sept 2023
12 Oct 2023
29 Sept 2023
Amount
Taking down rolling shutter of size not exceeding 10 Sqm each from any position, any location including fittings and fixtures and repairing / replacing of unserviceable components and re-fixing on same opening in its original position after complete overhauling, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified & directed. Note: Components/Parts replaced under this item shall be measured & paid separately as supply only under respective items.
All as per Item No. 1.00 above but area of each rolling shutter exceeding 10 Sqm each complete all as specified & directed.
All as per Item No. 1.00 above but complete work without taking down of rolling shutter complete all as specified & directed.
All as per Item No. 1.00 above but complete work without taking down of rolling shutter complete all as specified & directed.
Supply only MS cranked handles for operating gear operated rolling shutters made with hardened mild steel complete all as specified & directed.
Supply only safety lever locks of mild steel with 4 levers with two keys for rolling shutters approved/ best quality complete all as specified & directed.
Supply only ball bearing for rolling shutter to match the existing complete all as specified & directed.
Supply only spindle/ rails of rolling shutters complete all as specified & directed.
Supply only steel helical wires or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ functions complete all as specified & directed.
S&F in replacement 0.8 mm thick Plain black mild steel sheeting for cover hood of rolling shutter made channel or semi round shape including twp coats of synthetic enamel pain over one coat of red oxide primer internal or external surface complete all as specified & directed.
Supply only 40mm bore MS pipe for shaft of rolling shutter as per length required at site complete all as specified & directed.
Supply only MS pulley / wheel made with flat iron 25x 6 mm of 160mm dia for revolving of rolling shutter in shaft complete all as specified & directed.
Repair to locking plate/ locking arrangement by welding and providing missing part with new material using new nuts and bolts with locking arrangement for rolling shutter complete all as specified & directed.
S&F in replacement in position steel rolling shutters having 1.25mm thick of laths, without ball bearing, including top hood cover, anchoring rod, hasp and staple, push pull or manual type including one coat of red oxide primer fixed in position complete all as specified & directed.
S&F in replacement in position steel rolling shutters having 1.25mm thick of laths, without ball bearing, including top hood cover, anchoring rod, hasp and staple, gear operated type with bevel gear box and crank handle including one coat of red oxide primer fixed in position complete all as specified & directed.
S&F in replacement safety lever locks mild steel with 4 levers for rolling shutters approved/ best quality complete all as specified & directed.
S&F in replacement ball bearing for rolling shutter to match the existing complete all as specified & directed.
S&F in replacement in position gear box assembly complete suitable for operating rolling shutters of size up to 25 Sqm complete all as specified & directed.
M&L for preparation of new steel surface exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint complete all as specified & directed.
M&L applying one coats of synthetic enamel paint on old steel surfaces of any description over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Dismantling wrought iron mild steel work of any description (i.e. wind tie etc) not otherwise provided for etc complete all as specified & directed.
S&F rolled mild steel framed work as in doors or gates of angle or other section conforming to Fe-410-S (E-250) quality-B with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F 1.25mm thick MS, plain black sheet in steel gates, covering to door and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints complete all as specified & directed.
Dismantling asbestos cement / GI based (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified & directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated curved steel sheet 0.50 mm thick having minimum tensile strength of 550mpa as in roof covering / cladding to wall, fixed with self-tapping screws, Pitch of corrugation 175mm -190mm centre to centre and minimum crest depth 29mm complete all as specified & directed. Note:- Colour of prepainted sheet will be as approved by AGE(I).
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick having minimum tensile strength of 550mpa as in ridge, bend to shape for fixing as required, fixed with self-tapping screws complete all as specified & directed. Note:- Colour of prepainted sheet will be as approved by AGE(I).
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side fixed with coach/self driving screws and washers in roof, wall etc complete all as specified & directed.
S&F 6 to 8mm thick poly carbonate sheet of colour as approved by Engr-in-Charge in roof coverings incl ridges and fixed with necessary J/J hook, fasterners etc complete all as specified & directed.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not specified in BOQ
M/S Garg Sons
RK Enterprises
AMRESH TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .