Special Repairs to Damaged Roof finish, Joineries and other repair works for 30 Bedded block in upgradation of Primary Health Center at Zamin Endathur in Chengalpattu District.

Dismantling, clearing away and carefully stacking materials useful for reuse the existing Brick / stone masonry in Cement Mortar walls under 3m wall high etc., complete and as directed by the departmental officers.

Dismantling, clearing away and carefully stacking materials useful for re-use of any thickness of Floor Finish and Dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slab etc., complete.

Dismantling, clearing away and carefully stacking materials useful for re-use of any thickness of Floor Finish and Dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slab etc., complete.

Brick partition walls of 11.50cm thickness using best quality IInd Class Ground moulded Chamber Burnt Brick of size 9" x 4 3/8" x 2 3/4" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three M-Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) (For Superstructure Ground Floor)

Plastering with Cement Mortar 1:5 (One Cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm White glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof, Floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The Water Closet should be got approved from the Executive Engineer before use on works).

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., complete

Supplying, fabricating and fixing in position powder coated Aluminium fixed partition of size 1.50 x 1.30m using 63.50x38.10x2mm @1.127 kg/m Aluminium section at 900mm C/C in vertical direction and 1300mm @ C/C at horizontal direction with necessary rubber beadings Aluminium clips, of size 17.27x17.15x1.40mm@ 0.175 kg/m and using 4mm thick plain glass including cost of all materilas. Labours, power consumptions required for fabrications, drilling holes in RCC column, slab, masonry walls wherever necessary with powerdrills to the required extent and make good to the original condition after fixing etc. complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections are to be anodised with matt finish under electrically controlled conditions in accordance with IS 1868/1962 for an avereage anodic film thickness of 15 microns etc. complete.

Reparing and re-fixing the existing Solid Core Flush shutter with necessary T.W. internal lipping around confirming to IS 202-1 including cost of replacing new furniture fittings sucj as aluminium tower bolt, aluminium aldrops, aluminium door handle and door stopper with bush etc., including labour charges for fixing the flush door in its original position etc., complete and as directed by the departmental officers. Single leaf.

Supplying and Fixing of Wood Polymer Composite (WPC) door with solid door frames extruded with size 75mm x 50mm. The Inner core made of rigid WPC compound with minimum shore hardness of 55 and Bold Density 750Kg/cub.Mt. The frame shall be fixed to the wall using 10 x 10mm long MS screw through the frame by using PVC fasteners. A minimum of 4nos screw to be provided for each vertical members, Door shutter of 25mm thick Wood Polymer Composite (WPC) single core Extruded Door Shutter, with one side digital printing of Specified Design which is approved by engineer-in-Charge. Both side of the shutter shall have rough sugar texture finish, laminated with UV oil. The solid WPC board shall have minimum shore hardness of 55 and Bulk density 550Kg/Cub.Mt moulding the thickness remains 25mm(+/-1mm) etc complete as per the direction of the departmental officers.