Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.3 LAdmitted-Finance FIRST FLOOR FIRST DOOR BLOCK A SAHEB BARI 1 6 FAKIR GHOSH LANE BARANAGAR KOLKATA WEST BENGAL 700108 | 24 PARAGANAS NORTH | WEST BENGAL | 700108 | L1 | Admitted-Finance | |
| 2 | L2₹4.3 L+₹2.0 L (89.1%)Admitted-Finance 26D PARK LANE PARK STREET POLICE STATION KOLKATA WEST BENGAL 700016 | KOLKATA | WEST BENGAL | 700016 | L2 | Admitted-Finance | |
| 3 | L3₹6.7 L+₹4.4 L (195.6%)Admitted-Finance 1ST 5TH FLOOR INDUSTRY HOUSE 45 FAIR FIELD LAYOUT RACE COURSE ROAD BENGALURU 560001 | BENGALURU URBAN | KARNATAKA | 560001 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | RITES Limited L3 | EXCEL SURVEYORS PRIVATE LIMITED L1 | Inspection Survey And Surveillance India Pvt. Ltd. L2 |
|---|---|---|---|---|---|---|
| 1.00CHEMICAL ANALYSIS OF METALS & ALLOYS | ||||||
| 1.01BY SPECTROMETER: | ||||||
| 1.02 | Complete chemical analysis of Plain Carbon Steel | 1 | each | 1,000 ₹1,000 | 500 ₹500 Lowest | 700 ₹700 |
| 1.03 | Complete chemical analysis of Low Alloy Steel | 1 | each | 1,000 ₹1,000 | 600 ₹600 Lowest | 735 ₹735 |
| 1.04 | Complete chemical analysis of Stainless Steel | 1 | each | 1,000 ₹1,000 | 650 ₹650 Lowest | 800 ₹800 |
| 1.05 | Complete chemical analysis of Aluminium Alloy | 1 | each | 1,000 ₹1,000 | 650 ₹650 Lowest | 800 ₹800 |
| 1.06 | Complete chemical analysis of Copper Alloy | 1 | each | 1,000 ₹1,000 | 600 ₹600 Lowest | 800 ₹800 |
| 1.07 | Complete chemical analysis of Weld deposit except Nickel base as per ASME Sec - II (Pt-C) | 1 | each | 1,000 ₹1,000 | 600 ₹600 Lowest | 1,050 ₹1,050 |
| 1.08BY WET METHOD: | ||||||
| 1.09 | Complete Chemical analysis of Plain Carbon Steel | 1 | each | 2,345 ₹2,345 | 600 ₹600 Lowest | 920 ₹920 |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
10 Jul 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM(P P)
27, R N MUKHERJEE ROAD, KOLKATA 01
INSPECTION AND TESTING JOB
2023_BBJC_758578_1
eNIT/INSPECTION TESTING/18-2023
Open Tender
Miscellaneous Works
Works
1297 days
KOLKATA
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹1 L
Yes
10 Aug 2023
20 Jun 2023
10 Jul 2023
21 Jun 2023
10 Jul 2023
26 Jun 2023
Amount
CHEMICAL ANALYSIS OF METALS & ALLOYS
BY SPECTROMETER:
Complete chemical analysis of Plain Carbon Steel
Complete chemical analysis of Low Alloy Steel
Complete chemical analysis of Stainless Steel
Complete chemical analysis of Aluminium Alloy
Complete chemical analysis of Copper Alloy
Complete chemical analysis of Weld deposit except Nickel base as per ASME Sec - II (Pt-C)
BY WET METHOD:
Complete Chemical analysis of Plain Carbon Steel
Complete Chemical analysis of Plain Carbon Steel with Residual / Micro alloy element
Complete Chemical analysis of Manganese Steel
For each individual element of Manganese Steel except Carbon
Complete Chemical Analysis of Low Alloy Cast Iron
For each individual element of Low Alloy Cast Iron except Carbon
Complete Chemical Analysis of high Allow Cast Iron
For each individual element of High Alloy Cast Iron except Carbon
Complete chemical analysis of Stainless Steel & Special Steel
For ecah individual element of Stainless steel & Special Steel except Carbon
Complete Chemical Analysis of High Speed Steel
For each individual element of High Speed Steel except Carbon
Complete Chemical Analysis of Copper & Copper Alloys (Without Special Element)
Base element of Copper & Copper Alloy
Each specical element for Copper & Copper Alloy
Complete Chemical Analysis of Tin - Lead - Al - Zn - Metal & (Without Special Element) & Alloys
Each special element for Tin - Lead - Al - Zn Metal & Alloys
Complete Analsysis of Silver Alloy
Base element of Silver Alloy
Complete Analysis of Nickel Alloy
Base element of Nickel Alloy
Complete Analysis of Titanium - Chromium - Tungstan - Silicon etc Metals & Alloys
Base element of Ti - Cr - W - Si etc Metal & Alloys
Complete Analysis of Ferro Chrome
Main element of Ferro Chrome
Analysis of Ferro alloys except Ferro Chrome
Chemical Analysis of Quartz
Estimation of Carbon (C)
Estimation of Graphite Carbon (GC)
Estimation of Combined Carbon (CC)
For Determination of Purity of Metals & Alloys
MECHANICAL TEST OF METALS:
TENSILE TEST
Yield Stress, UTS, Elongation
Stress Under Specified Parmanent Set
UTS & Elongation of Tube up to 48 mm NB (Full Size)
Transverse Test
Dump Test
Up to 12 mm
12 mm to 20 mm
20 mm to 25 mm
Impact Test (V-Notch)
Charpy at Room Temp.
Charpy at 0° to (-) 20°C
Charpy at (-) 21°C to (-) 50°C
Compression Test
Load Test (U - Bolt, D - Shackle, Hanger etc)
Proof Load Test
Breaking Load Test
Proof Load with Breaking Load Test
Bend test
Rebend Test
Reverse Bend Test
Doubling Over Test
Strain Embrittlement Test
Flattening Test
Up to 75 NB
Up to 125 NB
Above 125 NB
Expansion/Drifting Test
Hydraulic Test of Socket
Bend Test of Tube
HARDNESS TEST:
Rockwell
Brinell
Vickers
Vickers under 1 KG Load
Hardness of Grits/ Shots
SHEAR STRENGTH:
Single up to 16 mm dia
Single above 16 mm dia
Double up to 16 mm dia
Double above 16 mm dia
WRAPPING TEST FOR WIRE:
Uo to 2 mm dia
Above 2 mm to 5 mm dia
Torsion test of Wire
CTD BARS:
Surface Characteirstic
Mass per Meter Run
Tensile Test with Total Elongation for D - Grade
Dimensional Checking of Section
Weight per Meter of Section
Welding procedure & Performance Qualification test
Transverse Tensile Test
All Weld Metal Tensile Test
Root Bend Test
Face Bend Test
Side Bend Test
Nick Break Test (Fracture Test)
Surface Characteirstic
Macro Examination of Weld, Haz/FL & PM with sample preparation
Butt or Fillet Weld
Microexamination of weld, HAZ, FL, & PM of Butt Weld
Surface Characteirstic
HARDNESS SURVEY: (SPECIMEN PREPARATION EXTRA)
Rockwell up to 10 points
Rockwell morethan 10 points
Vickers up to 10 points
Vickers up to 18 points
Vickers up to 30 points
Fillet weld fracture test
Ferrite content in butt weld (Ferrite meter - FISCHER)
THREADED FASTENERS
Tensile test up to M16
Tensile test above M16
Strength under wedge loading:
Up to M16
Above M16
Tensile test of bolt & nut assembly
Single shear strength:
Up to M16
Above M16
Double Shear strength:
Up to M16
Above M16
Proof Load Test of Bolt and stud
Proof Load Test of Nut
Rockwell Hardness
Vickers Hardness
Load Test of DTI Washer
Crushing test of Nut
Torque Test of Nut & Bolt:
Up to M16
Above M16
Unscrewing Test of Bolt & Nuts
Drifting Test of Nut
Cantilever Test of Step Bolt
Cone Proof Load Test of Nut
Washers
Scragging test
Headness
Rockwell
Brinell
Vickers
Vickers under 1 KG Load
SPRING WASHER:
Permanent Set
Parmanaent load Test (10 Washer together)
Rockwell Hardness with Sample Preparation
Twist Test
SPRING:
Load Deflactions
Stiffness/Spring Rate
Rockwell hardness
Brinell Hardness
Head Soundness Test of Bolt
METALLURGICAL TEST OF METALS:
Micro examination with structure & grain size of metals without photograph
Macro etching eaxm
Depth of decarburization/Case depth
Rate of Inclusion
Metallography other thanroutine test
Surface Integrity Test (MPT/MACRO/MICRO)
Sample Preparation Charges extra for all Metallurgical Test
IGC Test: (Sample Preparation Charges extra)
Practice A
Practice E
Practice A followed by E
Practice B
COATING TEST OF METAL:
Mass test
Uniformity/Preece Test
Adhesion Test
Coating Thickness by Elcometer
Coating thickness by microscopic method (sample preparation charges extra
Coating Identification
Coating Confirmation
Confirmation of Passivation
Anodic Coating by Stripping
Copper Oxidized Coating
CORROSION TEST OF COATED METAL:
Salt spray test for 24 hrs.
Salt spray test for 48 hrs.
Salt spray test for 72 hrs.
Salt spray test for 96 hrs.
Salt spray test up to 500 hrs.
Salt spray test up to 1000 hrs.
Corrosion under condensation (100% humidity chamber)
Stroage Stability Test of Cu - Coated wire
MECHANICAL TEST OF RUBBER PRODUCTS:
Shore - A - Hardness
Tensile strength
Elongation at break
Tear Strength
Tension Set
Compression Set
MECHANICAL TEST OF PLASTIC PRODUCTS/FRP:
Density/Specific Gravity
Rockwell Hardness
Tensile Test
Compressive Strength
Cross Breaking/Flexural Strength
Load Test
Shear Strength
CHEMICAL TEST OF RUBBER PRODUCTS:
Density/Specific Gravity
Water Absorption:
At room temp. for 24 hrs.
At 70/100°C for 24 hrs.
At room temp. up to 72 hrs.
At 70/100°C for 72 hrs.
Polymer Identification
Chemical Composition
Ash Content
Carbon Black Content
Total Extract
Polymer Content
Volume Swelling in fuel B at room temp. 24 hrs.
Volume Swelling in Lubricating Oil or ASTM Oil
At 70/100°C for 24 hrs.
At 70/100°C for 48 hrs.
At 70/100°C for 72 hrs.
At 70/100°C for 96 hrs.
Resistance to acid & Alkali at room temp. for 72 hrs. (for each)
CHEMICAL TEST OF PLASTIC PRODUCTS:
Density/Specific Gravity
Water absorption at room temp. for 24 hrs.
Glass Content
Total filler content
Inherent Viscosity
Melting Point
ACCELERATED AGEING OR TEMP. RESISTANCE TEST WITHOUT PHYSICAL TEST:
At 70/100°C for 48 hrs.
At 70/100°C for 72 hrs.
At 70/100°C for 96 hrs.
At 70/100°C for 168 hrs.
At 70/100°C for 240 hrs.
Above 100°C to 350°C for 8 hrs. (for each temp.)
FLAMMABILITY/BURNING TEST OF RUBBER/PLASTIC ITEMS
DIELECTRIC STRENGTH OF RUBBER/PLASTIC (insulated ITEM)
CONVEYOR BELT/V-BELT:
Thickness of cover
Adhesion (Per layer)
Breaking load (each direction)
Elongation at ref. load
Elongation at break
ELASTOMERIC PAD/GROOVED RUBBER PAD (AS PER RDSO SPEC):
Breaking Load
Peel Adhesion test
Compression Set
Hradness Test
Load Deflection Test
RUBBERISED GASKET/CORK SHEET:
Density
Hardness
Compressibility & Recovery
Compression Set:
At 70/100°C for 24 hrs.
At 70/100°C for 48 hrs.
At 70/100°C for 72 hrs.
At 70/100°C for 96 hrs.
Demensional Stability
Flexibility
PH Value of Water Extract
Resistacne to Acid & Alkali (For Each)
PAINT/VARNISH/RESIN:
Ready Mixed Primer Paint
Ready Mixed Enamel, Under Coat or finished paint
Etch Primer in dual Container
Aluminian Paint in dual Container
Synthemic Enamel Olive Green Paint under JSS or ISS Specification
Paints under RDSO Specification
Weight per Volume or Specific Gravity or Density
Acid Value
Iodine Value
Volatile Matter
PH Value
Gel Time
WOOLEN FELT:
Wool/Non - Wool Content
Density
Tensile Test
Oil Absorption Test
Ash Content
TARPAULIN/PP OR PE BAGS:
Breaking Strength (Wrap & Weft)
End & Picks
Seam Strength
Mass or Weight per Meter Length
Liner Density
MOISTURE CONTENT:
LOSS ON IGNITION
BREAKING LOAD OF SAFETY ROPE WITH LOOP ON ENDS
BITUMEN FELT (AS PER IS STANDERED)
PLYWOOD (AS PER IS: 303)
AGGREGATE (COORSE & FINE AS PER IS: 383)
Slieve Analysis
Bluk Anlysis
Moisture Content
Clay Content
BUILDING BRICKS/REFRACTORY BRICKS:
Compressiev Strength/Cold Crushing Strength
Water Absorption
Efforescenee Test
Apparent Porosity
Bulk Density
Chemical Analysis
AL2O3, Fe2O3, Si O2, Ca O & Mg O
Individual Element
BITUMINISED/KRAFT PAPER:
Chloride, Sulphate, Copper & pH (for each)
TILES:
Water Absorption
Bending/ Flexural Strength
Hardness in Moh's scale
Breaking Strength
Bluk Density
Resistance to Acid (weight loss)
CONSTRUCTION WATER:
pH value
Total dissolued solid
Chloride, Sulphate (each)
Acidity & Alkalinity test
NON DESTRUCTIVE TEST OF METAL:
RADIOGRAPHY TEST
Up to 63.5 mm NB wleded tube joint
For each 3" width flim exposed
For each 4" width flim exposed
For each sq. inch of exposed flim
For test plate (PQR/WPS)
ULTRASONIC TESTING
Lamination checking of plate
Rolled and forged products (shafts, Rolls, Bars etc)
Welding Joints
Bond Testing
Pipe and Ring
For Test Plates (PQR/WPS)
MAGNETIC PARTICLE TESTING
Using ordinary magnetic particle
Using florescent magnetic particle
DYE PENETRANT TESTING
Using ordinary chemical
Using fluorescent chemicals (Zyglo test)
Thickness qauging
Hardness Testing by prtable hardness tester
DYE PENETRANT TESTING
Dye penetration test for WPS/WPQR
Visual checking of test plates/samples for WPS/WPQR
MACHINING AND SAMPLE PREPARATION CHARGES (CARBON STEEL)
SAMPLE PREPARATION FOR IMPACT TEST
For Charpy Impact test:
Up to 20 mm thickness or dia
Above 20 mm thickness or dia
MACHINING AND SAMPLE PREPARATION CHARGES (CARBON STEEL)
ROUND BAR (tensile strength)
Up to 40 mm
40 mm to 50 mm
50 mm to 71 mm
71 mm to 100 mm
100 mm to 150 mm
ROUND BAR (Bend test)
Up to 40 mm
40 mm to 50 mm
50 mm to 71 mm
71 mm to 100 mm
100 mm to 150 mm
ROUND BAR (Tensile strength & Bend test)
Up to 40 mm
40 mm to 50 mm
50 mm to 71 mm
71 mm to 100 mm
100 mm to 150 mm
STEEL PLATE (Tensile Strength)
Up to 12 mm
Avobe 12 mm to 20 mm thick
Avobe 20 mm to 32 mm thick
Avobe 32 mm to 40 mm thick
Avobe 40 mm to 50 mm thick
Avobe 50 mm to 71 mm thick
Avobe 71 mm to 100 mm thick
Avobe 100 mm to 150 mm thick
STEEL PLATE (Bend test)
Up to 12 mm
Avobe 12 mm to 20 mm thick
Avobe 20 mm to 32 mm thick
Avobe 32 mm to 40 mm thick
Avobe 40 mm to 50 mm thick
Avobe 50 mm to 71 mm thick
Avobe 71 mm to 100 mm thick
Avobe 100 mm to 150 mm thick
STEEL PLATE (Tensile strength & Bend)
Up to 12 mm
Avobe 12 mm to 20 mm thick
Avobe 20 mm to 32 mm thick
Avobe 32 mm to 40 mm thick
Avobe 40 mm to 50 mm thick
Avobe 50 mm to 71 mm thick
Avobe 71 mm to 100 mm thick
Avobe 100 mm to 150 mm thick
Angle (Tensile Strength)
Angle (Bend Test)
Angle (Tensile Strength & Bend)
Channel Joist (Tensile Strength)
Channel Joist (Bend Test)
FOR TOR STEEL For Tensile – Bend & Rebend)
Up to 10 mm
Above 10 mm to 20 mm
Above 20 mm thickness or dia
Mounting Charges for vickers hardness
SAMPLE PREPARATION CHARGES FOR FILLET WELDED & BUTT WELDED PLATE AS PER IS: 7310
BUTT WELD:
Macro specimen (including cutting, grinding & filling)
Side bend specimen (including cutting, shaping, grinding and filling)
Root bend or face bend specimen (including cutting, grinding and polishing)
Hardness survey specimen (including cutting, grinding and polishing)
FILLET WELD
03 Nos. specimen for macro & fracture test (including 4 nos. cutting, 3 nos. grinding and filling)
Hardness survey specimen (including 1 no. cutting, grinding & polishing)
Fixed carbon test
SAMPLE PREPARATION CHARGES FOR MICRO EXAMINATION
Grain size
Decarburization
Coating Thickness
Inclution Rating
OTHER TESTING CHARGES
Testing of wire flux combination for SAW Multirum weld and Two run weld assembly Radiography Test of welded plate (600 mm length of weld) as per IRS M - 39
TESTING OF FLUX FOR SAW OF STRUCTURAL STEEL (AS PER IRS M - 39):
Grain Size
Basicity (Mg O, K20, Na2O, Ca O, Fe3 O2, Si O2 and Al2 O3)
Tap Density
Moisture Content
Ultrasonic Test of Double VEE but Welded test piece (IS: 4260/86/RA-2000)
Ultrasonic Testing Charges of weled joints (Using Panametrics, Usa) for UT Flaw Investigation at site/HPY
GLAND PACKING ASBESTOS
Moisture Content
LOSS ON IGNITION
Liner Density
Composition of Graphited and Lubricated Asbestos packing
SAMPLE PREPARATION FOR CHEMICAL ANALYSIS
Drilling charges
Turning / Drilling charges after removal of coating
Annealing before drilling if required
Washing with organic solvent to remove oil
Crushing charges of mineral, ore, fero alloys, refractory etc
CALIBRATION OF DIFFERENT INSTRUMENTS & GAUGES
External Micrometer with one setting rod - Range(mm) 0 to 100 - L.C. 0.01
External Micrometer with one setting rod - Range(mm) 0 to 100 - L.C. 0.001
External Micrometer with setting rods & anvils - Range(mm) more than 100 & up to 300 - L.C. 0.01
External Micrometer with setting rods & anvils - Range(mm) more than 100 & up to 300 - L.C. 0.001
External Micrometer with setting rods & anvils - Range(mm) more than 300 & up to 600 - L.C. 0.01
External Micrometer with setting rods & anvils - Range(mm) more than 300 & up to 600 - L.C. 0.001
External Micrometer with setting rods & anvils - Range(mm) more than 600 & up to 1000 - L.C. 0.01
External Micrometer with setting rods & anvils - Range(mm) more than 600 & up to 1000 - L.C. 0.001
Internal Micrometer - Range(mm) 50 to 500
Internal Micrometer - Range(mm) more than 500 & upto 1000
Vernier Caliper - Range(mm) 0 to 200 - L.C. 0.01
Vernier Caliper - Range(mm) 0 to 150 - L.C. 0.02
Vernier Caliper - Range(mm) 0 to 200 - L.C. 0.02
Vernier Caliper - Range(mm) 0 to 300 - L.C. 0.02
Vernier Caliper - Range(mm) 0 to 600 - L.C. 0.02
Vernier Caliper - Range(mm) 0 to 1000 - L.C. 0.02
Digital Vernier Caliper - Range(mm) 0 to 150
Digital Vernier Caliper - Range(mm) 0 to 300
Digital Vernier Caliper - Range(mm) 0 to 600
Vernier Height Gauge - Range(mm) 0 to 600 - L.C. 0.02
Vernier Height Gauge - Range(mm) 0 to 1000 - L.C. 0.02
Depth Micrometer / Depth Vernier - Range(mm) 0 to 150
Depth Micrometer / Depth Vernier - Range(mm) more than 150 & upto 300
Dial Gauge, Plunger Type - Range(mm) upto 5 - L.C. 0.01
Dial Gauge, Plunger Type - Range(mm) upto 5 - L.C. 0.001
Dial Gauge, Plunger Type - Range(mm) more than 5 & upto 20 - L.C. 0.01
Dial Gauge, Plunger Type - Range(mm) more than 5 & upto 20 - L.C. 0.001
Dial Gauge, Plunger Type - Range(mm) more than 20 & upto 25 - L.C. 0.01
Dial Gauge, Plunger Type - Range(mm) more than 20 & upto 25 - L.C. 0.001
Dial Gauge, Lever Type - L.C. 0.01
Dial Gauge, Lever Type - L.C. 0.001
Dial Bore Gauge, with anvil & spacer- Range(mm) 50 to 250
Steel Scale - Range(mm) 0 to 300 - L.C. 0.05
Steel Scale - Range(mm) more than 300 & upto 1000 - L.C. 0.05
Plain Plug Gauge - Range(mm) upto 50
Plain Ring Gauge - Range(mm) upto 50
Feeler Gauge - Range(mm) 1 Set of 15 Blades, 0.05mm to 1.0mm - L.C. 0.03
Pressure Gauge - Range up to 300kg/cm2
Pressure Gauge - Range more than 300kg/cm2 & up to 700kg/cm2
Pressure Gauge - Range(mm) more than 300kg/cm2 & up to 120 tonne
Steel Measuring Tape - Range 3m to 5m
Steel Measuring Tape - Range 15m
Steel Measuring Tape - Range 30m
Steel Measuring Tape - Range 50m
Steel Measuring Tape - Range 100m
Steel Measuring Tape - Range 150m
Combination Set, 180° - L.C. 0.02
Toque Wrench - Range upto 1200N-m - L.C. 0.02
Hygrometer - L.C. 0.02
Coatmeter / Elcometer Analogue
Coatmeter / Elcometer Digital
Weld Gauge
Angle Protractor, Universal, Bevel Dial Type - Range(mm) 300mm
Screw Gauge - Range(mm) 0 to 25mm
GO & NO GO Gauges for ISO Metric Threads, Ring Gauge - Range M16, M20, M22, M24
GO & NO GO Gauges for ISO Metric Threads, Plug Gauge - Range M16, M20, M22, M24
Tong Tester - Range 600Amp
Steel Straight Gauge - Range(mm) 600mm
Sieves - Range Different sizes of mesh
SAW Voltmeter - Range (0-100V)
SAW Ampmeter - Range (0-150 Amp)
SAW Trolley Feed Meter, Range (0-250 cm/min)
GMAW Amp. Cum Volt Count Digital Mater
GMAW CO2 Gas Flow cum Pressure Regulator - Range (0-50 lit/min, 0-400 bar)
Auto Level - Range (0-120m Visible Range)
Inspection Survey And Surveillance India Pvt. Ltd.
RITES Limited
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .