Street Light LED Arrangment at Ravi Shankar Nagar Bhopal

Cat (A) -Items to be supply and installation

Supply and fixing street light with high power LED of 3 to 6 Watt each on existing bracket assembled on single MCPCB and additional unique peanut lens on each LED, system lumens output with efficacy>120 lm/Watt. luminiare having color temp upto 6500K & 50000 hrs. burning life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF> 0.95 & surge protection 10KV. Housing made of pressure die cast aluminium with heat resistant flat glass, IP65 protection. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347 i/c connection wire, testing etc. to complete the job. ( I ) 60Watt, color temp 3000-6500k as required.

Supply of steel tubular pole swaged type as per IS:27131980 Complete with base plate and top Canopy. 410 SP-32 - 9.00 metre

Erection of RS Joist pole/'H' beam/steel tubular/steel rail pole of length 7 metres but not exceeding 10 metres in cement concrete 1:3:6 (1 cement : 3 core sand: 6 graded stone aggregate 40mm nominal size) base, foundation, muffing including excavation and back refilling etc. as required.

Supplying and erection of water tight terminal box made of 16 SWG M.S. Sheet (1.6mm thick) i/c rubber gasket of required size suitable for kit kat/MCB/switch including 2 nos. pole clamp of M.S. flat iron size 32x3mm, nut and bolts, 4 Pole epoxy connector nut & bolt type, 30Amp, 500Volt. The box shall be powder coated excluding the cost of the kit kat/MCB/Switch complete as per specification. 20x15x10Cms.

Supplying and fixing of 4 Pole epoxy connector nut & bolt type, 30Amp. 500Volt. in existing box as required as per specification:

Supply, laying and fixing of G.I. earth coil of 4mm dia G.I. wire having 120 turns of nearly 50mm dia. and 3 mt. long tail in existing pit duly earthed with pole etc complete as required as per specification.

upply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification

Supplying and erection of 50mm x 65mm shackle insulator with G.I. bolts, nuts and straps etc. as required.

Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor UNARMOURED 2 Core , 6 Sq.mm.

Supplying and drawing G.I. bearer wire 7/1.6mm including stringing, binding at existing brackets / pole, etc. for cable support in air as required and clearing of obstacles (if any

Laying of underground cable armoured./unarmoured as per specification in air suspended on existing approved type of iron clamp, G.I wire 7/1.6mm & shackle insulator/insulated strip complete. 1/2/3/4 Core cable upto 16 sq. mm

Cat (B) - Buy Back Items

Buy back of working/nonworking Street Light MH Fittings of 150watt / 250 watt installed at Ravi Shankar Nagar, Bhopal.Including dismentalling from pole and all reruired arrangements.

Shinfield Engineering Pvt. Ltd.

M/s. Abdul Sattar Farooqui

FAIZAN

RAGHVENDRA PRASAD DWIVEDI

NEERAJ KUMAR JAIN