Spl Repair of External Wiring from Transformer to Main Distribution Board in unit area at 9 (I) R and O FIT Under GE (Utilities) Udhampur

Amount

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr in depth for laying of under ground cable and getting out in soft/ loose soil complete all as specified and directed by Engr-in-Charge.

Returning filling in excavated soil in trenches including spreading , levelling, watering and well ramming in layers n exc 25 cm thick complete all as specified and directed by Engr-in-Charge.

Removing of excavated soil to a distance n exc 50mtr and deposited where directed at a level not exceeding 1.5 mtr above starting point complete all as specified & directed by engineer-in-charge

M & L for providing earthing with GI earth plate electrode 600 X 600 X 3.15 mm buried directly in ground (earth pit not less than 2.25M deep below ground level ) with top edge of the earth plate not less than 1.5M below ground level connected to GI strip 25x4 mm thick for earthing lead fixed by means of nuts,bolt,washers etc connected to earth test point complete all as specified in electrical plate NO 3 of SSR 1996 part 1 ,including necessary excavation and earth work in any strata of soil,comman salt, charcoal dust, 40 mm dia light grade GI pipe for protection to earth lead, GI water pipe 20mm dia with funnel &wire mesh , PCC pit with CI cover and frame etc all as specified and directed by Engineer-in-charge. Note:- All the joints shall be made with welding to get proper conductivity complete all as specified and directed by Engr-in-Charge.

Supply & fix for XLPE insulated, armoured, aluminium conductor cable, 1100 volts grade, heavy duty, cross sectional area 240 sq mm ,3.5 core, laid in trenches/ducts/through pipe complete all as specified and directed by Engr-in-Charge. Make : Havells/Polycab/Gloster

All as item No 05 but of size 95 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 70 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 50 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 35 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 25 sqmm 3.5 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 16 sqmm 4 core complete all as specified and directed by Engr-in-Charge.

All as item No 05 but of size 10 sqmm 2 core complete all as specified and directed by Engr-in-Charge.

Supply and lay DWC (Double wall corruguated) pipe attachments like coupler, snap-fit and any additional attachments suitable for DWC pipe of 120 mm conforming to IS: 14930/ IS 16205 for protection of LT Cable 240 sq.mm, complete all as specified and directed by engineer-in-charge . Make : Rex Poly extrusion / Tirupati/Supreme

Supply and lay DWC (Double wall corruguated) pipe attachments like coupler, snap-fit and any additional attachments suitable for DWC pipe of 70/63 mm conforming to IS: 14930/ IS 16205 for protection of LT Cable 95/70 sq.mm, complete all as specified and directed by engineer-in-charge . Make : Rex Poly extrusion / Tirupati/Supreme

Supply and lay DWC (Double wall corruguated) pipe attachments like coupler, snap-fit and any additional attachments suitable for DWC pipe of 40 mm conforming to IS: 14930/ IS 16205 for protection of LT Cable of verious sizes complete all as specified and directed by engineer-in-charge . Make : Rex Poly extrusion / Tirupati/Supreme

Supply and fix LED STREET LIGHT IP66, Energy Saving LED light with Aluminium pressure die-cast housing ,toughened glass in the front and peanut lens for batwing light distribution,90 Watt complete all as specified and directed by engineer-in-charge. Make : Polycab / Wipro / Orient

Supply and fix LED FLOOD LIGHT IP66, Energy Saving LED light with die-cast Aluminium housing in rectangle shape ,toughened glass in the front , 100 W complete all as specified and directed by engineer-in-charge. Make : Polycab / Wipro / Orient

Supply and fix LED BOLLARD LIGHT IP65,Having a cylindrical body with LED under PC Lens Placed on top. 10W complete all as specified and directed by engineer-in-charge. Make : Polycab / Wipro / Orient

Supply and fix LED Post Top lentran E-Top light fitting 40 watts, IP66, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 110 Lm/W. 5700k complete all as specified and directed by engineer-in-charge. Make : Polycab / Wipro / Orient Note :- (a) Fancing of light from protection of monkey is included in quoted rates. (b) All nut, bolts, screw and welding work of fencing is included in the quoted rates

Supply and fix LED focus light fitting 09 watts, IP66, Energy Saving LED light with PDC , Aluminium body & secondary Optical lens for superior light distrubution , Efficacy > 110 Lm/W. 5700k, complete all as specified and directed by engineer-in-charge. Make : Polycab / Wipro / Orient

Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box out door type, floor mounted, compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following :-

INCOMING (a) MCCB 400 amps, 4 pole,35/36 KA with adjustable thermal over load release 50 Hz, 415 volts grade-1 Nos. Make : L&T, Legrand, Indo Asian (b) Bus bar electrolytic grade Aluminium 800 Amp,4 pole, not less than 1.5 Mtr long SMC insulators mounted on insulators - 01 set Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connection of cables ,connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.

Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder changeover pillar box out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following complete all as specified and directed by Engr-in-Charge :-

Incoming (a) Onload changeover switch 400 amps, 4 pole, 35 KA , with adjustable thermal over load release 50 Hz, 415 volts grade - 01 Nos. Make : L&T, Legrand, Indo Asian (b) Bus bar electrolytic grade Aluminium 1000Amp,4 pole, not less than 1.5 Mtr long SMC insulators mounted on insulators - 01 set. Outgoing :- (a) MCCB 250 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -02 Nos. Make : L&T, Legrand, Indo Asian (b) MCCB 160 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -02 Nos. Make : L&T, Legrand, Indo Asian Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connection of cables ,connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.

Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following complete all as specified and directed by Engr-in-Charge :-

Incoming :- (a) MCCB 250 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -01 Nos. Make : L&T, Legrand, Indo Asian (b) Bus bar electrolytic grade Aluminium 400 Amp,4 pole, not less than 1.5 Mtr long SMC insulators mounted on insulators - 01 set. Outgoing :- (a) MCCB 100 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -01 Nos. Make : L&T, Legrand, Indo Asian (a) MCCB 63 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -03 Nos. Make : L&T, Legrand, Indo Asian Note- :- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connection of cables ,connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.

Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder pillar box out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following complete all as specified by Engr-in-Charge :-

Incoming :- (a) Bus bar electrolytic grade Aluminium 400 Amp,4 pole, not less than 1.5 Mtr long SMC insulators mounted on insulators - 01 set Outgoing :- (a) MCCB 200 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -03 Nos. Make : L&T, Legrand, Indo Asian Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connection of cables ,connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.

Supply, install, testing and commissioning and testing factory made and tested CPRI type test certified) LT feeder r pillar box out door type, floor mounted,compertmantalised suitable for 415 Volts 3 phase 4 wire, 50 Hz AC supply system, dust and vermin proof, made of 3.15mm CRCA MS sheet with digital Volt meter, Ammeter, with CTs ,Led lamps RYB for all incomers & outgoings and base frame of 50x50x6mm angle iron , powder coated, having front and rear openeable hinged double door shutters with aprons for cable entry and locking arrangement complete with following complete all as specified and directed by Engr-in-Charge :-

Incoming :- (a) Bus bar electrolytic grade Aluminium 400 Amp,4 pole, not less than 1.5 Mtr long SMC insulators mounted on insulators - 01 set Outgoing :- (a) MCCB 160 amps, 4 pole,25 KA with adjustable thermal over load release 50 Hz, 415 volts grade -01 Nos. Make : L&T, Legrand, Indo Asian Note- (i) Rate quoted is deemed to be inclusive of PCC foundation/pedestal and connection of cables ,connected earth work. (ii) Panels shall be placed above 0.6 mtr from ground level (iii) Outgoing MCCBs shall be fed with solid busbar connectors. (iv) Cables shall be terminated using gun metal /SS glands.

Supply and fix Junction panel box of following nomanclature as illustration below:- Type:- CPRI approved / Factory made Make:- L&T/ABB/Schneder/Simens Panel size:- 3.15mm CRCA Voltage:-415V, 3 Phase, 50Hz BUSBAR:- Aluminium 200 Amps (Tinned) MCCB- 63 A Nos System:- Outdoor Panel Base:- Angle iron 50x50x6mm Size of Panel:- Size as per switchgear accomdation ,hindge to be provided,powder coated to complete panel. Note:- PCC foundation according to panel. coping/finising is included in quoted rates.

M/S DHARAM & SONS ENTERPRISES (BID ID -3180743)

K S BUILDERS (BID ID -3172953)

FANGALIA TRADERS (BID ID -3175162)

HIMALAYA ENTERPRISES (BID ID -3176312)

PREM NATH KHAJURIA AND SONS (BID ID -3175891)

MOHAN LAL AND SONS (BID ID -3180736)

EAST URBAN ENGINEERING (BID ID -3182093)