Overhauling of turnouts, deweeding of track, jungle clearance, deepening of side drain etc under SSE/Ratnagiri section

A-Schedule A: (Overhauling of fittings of turnouts)- USSOR-2021 50466.88 Below/P

063100 Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with contractor's grease of 1 specified quality as per provisions of IRPWM, as directed by Engineer in-charge, Note - 1)List of seized ERC along with location shall be prepared after inspection of SSE/P-Way and marked prior to execution of this item. 2) Due care shall be taken to avoid any damage to the sleeper. 3) A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process

063140 Renewal of seized Plate/Rail Screws on PSC sleepers by using gas or any approved methods, dully drilling holesin broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels(procured from RDSO approved 2 sources )and grouting around dowel with Epoxy materials of approved specification and refixing new Raiway plate/Rail screws duly greasing the screw with spcified grease with all contractor's materials,consumables,tools & plants ,labour with all leads,lift. Note : 1) Seized screws shall be identified and marked by JE/P-way and verified at minimum SSE/P-way in charge level 2) Due care shall be taken to avoid any damage to the sleeper. 3)A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper get damaged in the process. Above/

A-Schedule A1: (Through fitting renewal of turnouts)- USSOR-2021 387742.37 Below/P

74060 Through Fitting renewal (TFR) with new Grooved Rubber sole pads(GRSP), Liners and ERC or through renewal with new GRSPs using existing ERCs and liners after cleaning and greasing on entire Turnout of PSC Fan shaped layout including approach & exit sleepers comprising of removing & refixing or replacement of plate screws, ERCs and liners including seized ERCs, 1 replacing the GRSP after cleaning rail seat, refixing slide chairs, lubrication of ERCS applying grease to plate screws and Liner contact area with contractor's Grease Graphite Grade O' (IS:408) after cleaning of rust/scale on liner contact area etc., as per provisions of IRPWM of latest version with all contractor's labour, tools, plants and stacking all the released materials etc complete and as directed by Engineer in charge Note: GRSP will be supplied at SSE/stores/depot 74061 For 1 in 12 Turnouts

74060 Through Fitting renewal (TFR) with new Grooved Rubber sole pads(GRSP), Liners and ERC or through renewal with new GRSPs using existing ERCs and liners after cleaning and greasing on entire Turnout of PSC Fan shaped layout including approach & exit sleepers comprising of removing & refixing or replacement of plate screws, ERCs and liners including seized ERCs, 2 replacing the GRSP after cleaning rail seat, refixing slide chairs, lubrication of ERCS applying grease to plate screws and Liner contact area with contractor's Grease Graphite Grade O' (IS:408) after cleaning of rust/scale on liner contact area etc., as per provisions of IRPWM of latest version with all contractor's labour, tools, plants and stacking all the released materials etc complete and as directed by Engineer in charge Note: GRSP will be supplied at SSE/stores/depot 74062 For 1 in 8.5 Turnouts Above/

A-Schedule A2: (Removing of corroded bolts and nuts) 16350.00 Below/P

Removal of corroded / seized bolts and nuts in yards and in the mid section. Above/

A-Schedule A3: (Supplying and applying anti-corrosice paint) 807500.00 Below/P

Supplying and applying anti corrosive bituminous black paint in service 52 kg/ 60 kg. Rails in two coats with contractor's own brush after preparation of surface with contractor's own paint confirming to I.S 9862-1981 to a thickness of 100 microns per each coat on non gauge face, 1 both webs and foots of rails excluding gauge face, rails top and bottom of foot as per standard drawing including surface preparation and removal and refixing of ERC liners and outer surface of inserts for sleeper density of 1540/1660 Nos/Km. In PSC sleepers and 52 kg./60 kg rails with contractor's own labours brushes, tools and paint, transportation with all leads and lift including surface preparation and painting of rails and as specified including crossing of tracks, handling of rails and as directed by Engiener-in-Charge with all leads and lift Above/

A-Schedule A4: (Lubrication of plate/rail screws of point) USSOR-2019 452659.20 Below/P

71220 Lubrication of Plate/ Rail Screws of Point & Crossings, SEJs, Bridges, Curve etc, 1 including removal of plate /Rail Screw carefully without breaking the screw, cleaning with wire brush etc both screws and dowel hole applying railway grease graphite, refixing the screw with spring washer and sealing the top and sides of screw with Railway's grease graphite to prevent ingress of moisture and corrosion with contractors labours, tools all lead & lift. Above/

A-Schedule A5: (Repair of grooves in PSC sleepers) 2974320.00 Below/P

Repairs of grooved in PSC sleepers in track under traffic condition by using 1 contractors special cement (Flarex-SG) or similar which includes removing of ERC clips, lifting of track, cleaning and making rail seat rough etc. And applying the cement paste to grooved surface of the sleepers and refixing the rail and fitting at original place after completion of grouting with all contractors own materials, labour, tools, equipments etc. With all leads and lift and as directed by engineer-in-charge. Above/

B-Schedule B: (Deepening and cleaning of side drain)- CPWD-DSR 2023 285952.26 Below/P

2.9 Excavation work by mechanical means (Hydraulic excavator)/ manual means in 1 foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m 2.9.3 Hard rock (blasting prohibited

2.8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual 2 means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2.8.1 All kinds of soil. Above/

Filling of deep screened muck (contaminated ballast)/desilting muck/shallow screened muck/ debris in bags and keep ready for loading on BRN including contractor's bags, labours, tools, plants, materials etc. with all leads and lift etc complete.

Loading of deep screened muck/ desilting muck/ shallow screened muck / debris bags 3 on Diplorry/ mono dolley in mid section or in stn yard including up to maximum lead 0.5 km with contractor's bags , labours, tools, plants, materials etc with all leads and lift etc complete. Extra for every additional 0.50 Kms and up to 1.0 km. Or part thereof

Disposing of deep screened muck / desilting muck / Shallow screened muck / debris filled bags, labours, tools, plants, materials etc. with lead upto 50m and maximum lift upto 5m height etc.complete.(This item will operate only when lead item can not be operated Above/

B-Schedule B2: (Hiring of machinery) -USSOR-2021 68630.64 Below/P

211220 Hiring of machinery for minor miscellaneous works for short duration 1 including operator/driver, fuel, lubricants and consumable. The contractor shall arrange all statutory permits as required by rules and regulations prevailing in the area of work. Payment shall be made for actual working hours at site. 211221 JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity Above/

C-Schedule C: (Cleaning of jungle) 420500.00 Below/P

Cleaning of Jungle, vegetation, shrubs, grass, bushes, seeds, cutting of tress and saplings of girth upto 30 cm grown on slopes of cutting using either hand sickles or tree cutting machines dressing neatly upto ground surface of slopes and disposing of rubbish on top of cutting away from catch water drain and upto a lead of 50 m and lead uptp 12 m with all contractors 1 labours,materials,tools and plants,non infringing ladders or scaffolding etc. complete as directed by engineer in charge Note : Mode of Measurement : 1) Payment will be made on SQM basis for both east and west sides individually with length as per track length and height as per demarked bottom and top levels by direct tape measurement at every 5 m intervals. 2) Minor undulations on slope will not br considered. 3)Before commencing work,the bottom and top levels between which vegetation to be cleared and the length will be demarked by KRCL Above/

C-Schedule C1: (Cutting of tress)- USSOR 2021 103129.22 Below/P

013010 Felling of trees of grith (measured at a height of 1.0 m above ground level) including lead and stacking of material within 100m. 1) When stumps are grubbed up in addition, the 1 rates shall be doubled for tree cuts and grubbed. 2) Payment for Grubbing shall be made where specially ordered 3) Grubbing shall be ordered only where it is essential to remove the stumps including the roots, as per specifications 4) Grubbing shall include removal of roots of trees and saplings to a depth of 60 cm below ground level or 30 cm below formation level or 15 cm below subgrade level, whichever is lower. 013011 Girth over 30 cm and upto 60 cm

013010 Felling of trees of grith (measured at a height of 1.0 m above ground level) including lead and stacking of material within 100m. 1) When stumps are grubbed up in addition, the 1 rates shall be doubled for tree cuts and grubbed. 2) Payment for Grubbing shall be made where specially ordered 3) Grubbing shall be ordered only where it is essential to remove the stumps including the roots, as per specifications 4) Grubbing shall include removal of roots of trees and saplings to a depth of 60 cm below ground level or 30 cm below formation level or 15 cm below subgrade level, whichever is lower. 013012 over 60 cm to upto 1.50 m

013010 Felling of trees of grith (measured at a height of 1.0 m above ground level) including lead and stacking of material within 100m. 1) When stumps are grubbed up in addition, the 1 rates shall be doubled for tree cuts and grubbed. 2) Payment for Grubbing shall be made where specially ordered 3) Grubbing shall be ordered only where it is essential to remove the stumps including the roots, as per specifications 4) Grubbing shall include removal of roots of trees and saplings to a depth of 60 cm below ground level or 30 cm below formation level or 15 cm below subgrade level, whichever is lower. 013013 Girth over 1.50 m upto 3 .0 m Above/

C-Schedule C2: (Removing of seeds and bushes)- USSOR 2021 489244.80 Below/P

136100 Removing weeds and Bushes in ballast sectionand cess upto 3.95 mfrom center line of track in mid sectionand station yard, as specified by engineer in charge including disposal of braches outside cess/yard. Above/

C-Schedule C3: (Side drain cleaning) 309825.00 Below/P

Side drain cleaning including disposing of muck as per instructions of Engineer in charge to keep the drain flowing in cutting /tunnel etc. complete