Construction of 33/11 kV 2x10 MVA Sub station 1 at SGPGI Campus

Amount

Laying and Jointing PVC Pipe. Heading

10 MVA -33/11kV Power Transformer

Cost of Power Transformer Plinth with Rail Piece 90 LBS -4 mtr long 2 nos as per specification (All The material shall be provided by the contractor)

MS Round Bar 32 mm

Earthing of substation complete by round bar 32 mm dia complete as per specification and connection of all switchyard equipment by GI Flat 50x6 mm (The contractor shall arrange all the material except MS Round Bar 32 MM)

33KV Line Isolator

33KV Bus Isolator

33 KV VCB (motorised) with structure

33 kV 1 Ph CT 200/100/1 Amp.

33 kV 1 Ph CT 400/200/1 Amp.

33 KV PT 33KV/110 V

33KV Lightning Arrestor 400 Amp

33kV Control panel for double T/F with differential relay

33kV Control panel for single feeder without differential relay

Structure for 33 KV Line/Bus Isolator as per specification(including Plinth & foundation) as per specification

Structure for 33KV Lightning Arrester (3 nos.) with Plinth & foundation

33 KV VCB plinth & foundation (2x2x1mtr.) as per specification

Structure 33 kV Single Phase CT (3 Nos.) with Plinth & foundation

33 KV bus bar gantry complete with structure

Cable Stand structure with foundation

ACSR Panther Conductor

Jumpering of complete line and transformer bay with ACSR Panther conductor by the help of PG clamp and connectors (all Material shall arranged by contractor except ACSR panther conductor)

Structure for Transformer Neutral Stand With Foundation

11 KV VCB Switchgears with Incoming CTR 600/300/5A, 350MVA SCADA Compatible

11 KV VCB Switchgear outgoing 200/100/5A,350MVA, SCADA compatible .

11 KV Bus Coupler 350 MVA SCADA Compatible

24 Volt battery and battery charger with cabinet complete

RCC Cable trench 850x800x150 mm with cover as per drawing

Control cable trench 300x300 mm with cover

Heat Shrinkable jointing kit suitable for 11KV XLPE 3x300 Sq.mm. cable size (Outdoor termination kit)

Heat Shirnkable jointing kit suitable for 11KV XLPE 3x300 Sq.mm. cable size (Indoor termination kit)

11KV/0.433 KV, 3 Phase, 63 KVA Transformer (BEE standard, 3 star rating self protected type), Al. wound

Pipe Boring type earthing minimum 40 mtr deep from ground level up to water level with B class GI Ppe 2" dia.connection of equipment with earhting included in the Job as per specification/Norms

11 KV 3 Core Al. XLPE Cable 3x300mm sq.

Control cable 6x2.5 mm sq.

Control cable 4x2.5 mm sq.

Control cable 2x2.5 mm sq.

11 KV 3x70mm2 XLPE cable

11 KV 3x70mm2 J/k outdoor

11 KV 3x70mm2 J/k indoor

LT cable 3.5x70mm2

Laying of 11 KV 3x300 sq mm XLPE cable in cable trench

Laying of 11 KV 3x70 sq mm XLPE cable in cable trench

Filling of switchyard area by gravels of 20-40 mm size with 120 mm thickness

(Station T/F) Plinth with RCC Top 1.5x1.5x1.2 Mtr.

Laying of interlocking tiless in switchyard and other required place

Switchyard Fencing with toewall including switchyard gate (as per Specification) with tenesh type wiremess 10SWG

Outdoor switch yard & approach road Lighting

Painting of Structures in S/S (All The material shall be provided by the contractor )

T & P of Sub-Station & Switchgears including chair table and primary tools etc (As per Specification)

4.5 Kg. CO2 fire extinguisher, portable type

5 kg. Dry chemical powder fire extinguisher, portable type

Fire buckets (4 nos.) with stand filled with dry sand

Rubber matting 20 sq. mm. thick size (1 X 2 mtr.)

S/S name board (SMC) with stand & single line digarm of s/s

Protection Board complete

Construction of Fire wall,RCC framed with fire bricks in between transformers (4.5x0.345x4.00 ) Mtr

LT Distribution panel for S/S with on 100 Amp MCCB and 2 nos outgoing MCB 32Amp, 4nos 16 amp MCB's as per specification

Hoisting of 11KV 3x300 sq mm XLPE cable in panel/cable stand or on outdoor structure/equipment with required clamp nut & bolt and dressing of cable as per norms.

Hoisting of 11KV 3x70 sq mm XLPE cable in panel/cable stand or on outdoor structure/equipment with required clamp, nut&/bolt and dressing of cable as per norms.

Earthing of substation complete as per specification (Indoor earthing)

Laying of LT cable 3.5x70 sq mm in constructed trench

Connection of LT 3.5x70 sq mm LT XLPE cable with suitabe size of Outdoor/indoor with 63 KVA Transformer and LT distribution Panel

STP 11 M long

Top channel 100x50mm

MS angle 65x65x6mm

M S Earthing Rod 20x2500 mm

11KV pin insulator

11KV Pin with Nut

Barbed wire

Danger Board with clamp for 11 KV

Number Plates with nuts & Bolts

Stone pad 300x300x75 mm

D.O. fuse Set

Concreating of pole

MS Nut & Bolt

Clamp with Nut & Bolt

TPMO Set

11 KV Lightening Arrestor

Earth wire clamp with Nut & Bolts

11 KV Work

11 KV 3 Core Al. XLPE Insulated Cable 3x185 mm sq.

11 KV 3x185 sq mm Indoor Jointing Kits

Laying of 11 KV XLPE cable 3x185 sq mm D/C by digging of trench 900 mm, deep, 750 mm wide its boxing with brick, sand, stone slab after laying of cable separation of cable by brick wall up to stone slab filling and proper levelling& ramming. The ferruling of cable also include in this work (All The material shall be provided by the contractor except 11 KV XLPE cable)

Hoisting of 11KV cable in panel/cable stand/Double Pole or on outdoor structure/equipment with required clamp, nut & bolt and dressing of cable as per norms.

Laying of Single 11 KV 3x185 sq mm XLPE cable in constructed trench

Laying of Single 11 KV 3x185 sq mm XLPE cable in MS pipe 125mm dia (All The material shall be provided by the contractor except 11 KV XLPE cable)

Laying of Single 11 KV 3x185 sq mm XLPE cable in HDPE pipe 125/150mm dia (All The material shall be provided by the contractor except 11 KV XLPE cable)

33 KV Work

33KV 3x300 mm2 XLPE cable

Heat Shrinkable jointing kit for 33 KV 3x300 Sq. mm. XLPE outdoor

Heat Shrinkable Cable jointing kit straight through for 33 KV 3x300 Sq. mm. XLPE Cable

Laying of 33 KV 3x300 sq mm XLPE Double cable by digging of trench 1100 mm, deep, 750 mm wide its boxing with brick,sand,stone slabafter laying of cable separation of cable by brick wall up to stone slab filling and proper levelling& ramming. The ferruling/ tagging of cable also include in this work (The contractor shall provide all the required material except 33 KV XLPE cable)

Laying of 33 KV 3x300 sq mm XLPE single cable by in HDPE Pipe 160 mm dia digging of cable trench 600 mm wide and 1100 mm deep as ISS The ferruling/ tagging of cable also include in this work (The contractor shall provide all the required material except 33 KV XLPE cable)

Laying of 33 KV 3x300 sq mm XLPE single cable by in Hume Pipe 200 mm dia digging of cable trench 600 mm wide and 1100 mm deep as ISS The ferruling/ tagging of cable also include in this work (The contractor shall provide all the required material except 33 KV XLPE cable)

Laying of 33 KV 3x300 sq mm XLPE Single cable in constructed trench The ferruling of cable also include in this work (The contractor shall provide all the required material except 33 KV XLPE cable)

Hoisting of 33 KV XLPE cable on cable stand/existing structure with prooper dresssing of cablle as per Norms

Dismentaling of 2 no. 132/11 KV, 20 MVA T/F and carriage from SGPGI Campus to store

AMIT ENGINEERING CORPORATION

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER